DMF synthesis

One final family of potential precursors has been reported by Newton and Searles1291, who found nitrile complexes of the type, [RuX2(RCN)4], to be soluble in a number of solvents. The nitriles can be displaced in boiling methoxyethanol, and the benzonitrile complex was used by tom Dieck et al.1301 in boiling diglyme to prepare isomeric diazadiene complexes [Ru(AB)2Cl2]. This may represent a useful alternative route to the DMF synthesis. 

Sol-gel derived hybrid materials are used as heterogeneous catalysts for the synthesis of N,N-dimethylformamide (dmf) using scC02 as both solvent and reactant. Results are compared to conventional homogeneous and heterogeneous catalysts. The turnover numbers exceed those reported so far for dmf synthesis by heterogeneous catalytic routes by more than three orders of magnitude. 

Fragmentation. Molecules containing a TfO-C-C-C-Si unit are prone to fragment on exposure to imidazole in hot DMF. Synthesis of mesocyclic compounds by this method has been demonstrated. 

Dimethyl formamide (DMF) is a well-known organic solvent having applications in various sectors such as plastics, pharmaceutics, paint industries and peptide synthesis. Catalytic carbonylation is the commonly used procees for DMF synthesis. Replacing toxic CO by renewable COj has attained much attention. Raney nickel was first used for this purpose and found to be an effective catalyst for the reaction between dimethyl ammine, CO and in... 

The most stable protected alcohol derivatives are the methyl ethers. These are often employed in carbohydrate chemistry and can be made with dimethyl sulfate in the presence of aqueous sodium or barium hydroxides in DMF or DMSO. Simple ethers may be cleaved by treatment with BCI3 or BBr, but generally methyl ethers are too stable to be used for routine protection of alcohols. They are more useful as volatile derivatives in gas-chromatographic and mass-spectrometric analyses. So the most labile (trimethylsilyl ether) and the most stable (methyl ether) alcohol derivatives are useful in analysis, but in synthesis they can be used only in exceptional cases. In synthesis, easily accessible intermediates of medium stability are most helpful. 

The /-butoxycarbonyl group (Boc, "t-box ) has been eMens vely used in peptide synthesis, and Boc derivatives of many amino acids are commercially available. The customary reagent for the preparation from the amine is t-butyl azidoformate in water, dioxane/water, DMSO, or DMF. The cleavage by acids of medium strength proceeds with concomitant loss of isobutene and carbon dioxide (L.A. Carpino, 1957, 1973 see section 4.1.2.2). 

Trichloroethanol may be used analogously. The 2,2,2-trichloroethyl (Tee) group is best removed by reduction with copper-zinc alloy in DMF at 30 °C (F. Eckstein, nucleic acid synthesis see section 4.1.1. 

With the dicyclohexylcarbodiimide (DCQ reagent racemization is more pronounced in polar solvents such as DMF than in CHjCl2, for example. An efficient method for reduction of racemization in coupling with DCC is to use additives such as N-hydroxysuccinimide or l-hydroxybenzotriazole. A possible explanation for this effect of nucleophilic additives is that they compete with the amino component for the acyl group to form active esters, which in turn reaa without racemization. There are some other condensation agents (e.g. 2-ethyl-7-hydroxybenz[d]isoxazolium and l-ethoxycarbonyl-2-ethoxy-l,2-dihydroquinoline) that have been found not to lead to significant racemization. They have, however, not been widely tested in peptide synthesis. 

To illustrate the specific operations involved, the scheme below shows the first steps and the final detachment reaction of a peptide synthesis starting from the carboxyl terminal. N-Boc-glycine is attached to chloromethylated styrene-divinylbenzene copolymer resin. This polymer swells in organic solvents but is completely insoluble. ) Treatment with HCl in acetic acid removes the fert-butoxycarbonyl (Boc) group as isobutene and carbon dioxide. The resulting amine hydrochloride is neutralized with triethylamine in DMF. 

The amino add analysis of all peptide chains on the resins indicated a ratio of Pro Val 6.6 6.0 (calcd. 6 6). The peptides were then cleaved from the resin with 30% HBr in acetic acid and chromatogra phed on sephadex LH-20 in 0.001 M HCl. 335 mg dodecapeptide was isolated. Hydrolysis followed by quantitative amino acid analysis gave a ratio of Pro Val - 6.0 5.6 (calcd. 6 6). Cycll2ation in DMF with Woodward s reagent K (see scheme below) yielded after purification 138 mg of needles of the desired cyc-lododecapeptide with one equiv of acetic add. The compound yielded a yellow adduct with potassium picrate, and here an analytically more acceptable ratio Pro Val of 1.03 1.00 (calcd. 1 1) was found. The mass spectrum contained a molecular ion peak. No other spectral measurements (lack of ORD, NMR) have been reported. For a thirty-six step synthesis in which each step may cause side-reaaions the characterization of the final product should, of course, be more elaborate. 

Unsaturated nitriles are formed by the reaction of ethylene or propylene with Pd(CN)2[252]. The synthesis of unsaturated nitriles by a gas-phase reaction of alkenes. HCN, and oxygen was carried out by use of a Pd catalyst supported on active carbon. Acrylonitrile is formed from ethylene. Methacrylonitrile and crotononitrile are obtained from propylene[253]. Vinyl chloride is obtained in a high yield from ethylene and PdCl2 using highly polar solvents such as DMF. The reaction can be made catalytic by the use of chloranil[254]. 

The benzoic acid derivative 457 is formed by the carbonylation of iodoben-zene in aqueous DMF (1 1) without using a phosphine ligand at room temperature and 1 atm[311]. As optimum conditions for the technical synthesis of the anthranilic acid derivative 458, it has been found that A-acetyl protection, which has a chelating effect, is important[312]. Phase-transfer catalysis is combined with the Pd-catalyzed carbonylation of halides[3l3]. Carbonylation of 1,1-dibromoalkenes in the presence of a phase-transfer catalyst gives the gem-inal dicarboxylic acid 459. Use of a polar solvent is important[314]. Interestingly, addition of trimethylsilyl chloride (2 equiv.) increased yield of the lactone 460 remarkabiy[3l5]. Formate esters as a CO source and NaOR are used for the carbonylation of aryl iodides under a nitrogen atmosphere without using CO[316]. Chlorobenzene coordinated by Cr(CO)j is carbonylated with ethyl formate[3l7]. 

Carboxylic acids are produced in water. Selection of solvents is crucial and the carbonylation of the enol triflate 480 can be carried out in aqueous DMF, and that of the aryl triflate 481 in aqueous DMSO using dppf as a ligand[328,334]. The carbonylation of the enol triflate 482 to form the a, 0. unsaturated acid 483 using dppf as a ligand in aqueous DMF has been applied in the total synthesis of multifunctionalized glycinueclepin[335]. 

Aryl, heteroaryl, and alkenyl cyanides are prepared by the reaction of halides[656-658] or triflates[659,660] with KCN or LiCN in DMF, HMPA, and THF. Addition of crown ethers[661] and alumina[662] promotes efficient aryl and alkenyl cyanation. lodobenzene is converted into benzonitrile (794) by the reaction of trimethylsiiyl cyanide in EtiN as a solvent. No reaction takes place with aryl bromides and chlorides[663]. The reaction was employed in an estradiol synthesis. The 3-hydroxy group in 796 was derived from the iodide 795 by converting it into a cyano group[664]. 

M. Fieser, Fieser andPieser s Reagentsfor Organic Synthesis, Vol. 14, John Wiley Sons, Inc., New York, 1989, pp. 148—149. See also Vol 12,1986, pp. 203—204, which contains references to eadier DMF citations in this series. 

Fig. 2. Synthesis of uma2enil (18). The isonitrosoacetanihde is synthesized from 4-f1iioroani1ine. Cyclization using sulfuric acid is followed by oxidization using peracetic acid to the isatoic anhydride. Reaction of sarcosine in DMF and acetic acid leads to the benzodiazepine-2,5-dione. Deprotonation, phosphorylation, and subsequent reaction with diethyl malonate leads to the diester. After selective hydrolysis and decarboxylation the resulting monoester is nitrosated and catalyticaHy hydrogenated to the aminoester. Introduction of the final carbon atom is accompHshed by reaction of triethyl orthoformate to...

Hydrolysis of esters and amides by enzymes that form acyl enzyme intermediates is similar in mechanism but different in rate-limiting steps. Whereas formation of the acyl enzyme intermediate is a rate-limiting step for amide hydrolysis, it is the deacylation step that determines the rate of ester hydrolysis. This difference allows elimination of the undesirable amidase activity that is responsible for secondary hydrolysis without affecting the rate of synthesis. Addition of an appropriate cosolvent such as acetonitrile, DMF, or dioxane can selectively eliminate undesirable amidase activity (128). 

A benzyl carbonate was prepared in 83% yield from the sodium alkoxide of glycerol and benzyl chloroformate (20°, 24 h). It is cleaved by hydrogenolysis (H2/ Pd-C, EtOH, 20°, 2 h, 2 atm, 76% yield) and electrolytic reduction (-2.7 V, R4N X, DMF, 70% yield). A benzyl carbonate was used to protect the hy-droxyl group in lactic acid during a peptide synthesis. 

In a penicillin synthesis the carboxyl group was protected as a p-bromophenac ester that was cleaved by nucleophilic displacement (PhSK, DMF, 20°, 30 mil... 

The carboxamidomethyl ester was prepared for use in peptide synthesis. It is formed from the cesium salt of an A-protected amino acid and a-chloroacetamide (60-85% yield). It is cleaved with 0.5 M NaOH or NaHCOa in DMF/H2O. It is stable to the conditions required to remove BOC, Cbz, Fmoc, and r-butyl esters. It cannot be selectively cleaved in the presence of a benzyl ester of aspartic acid. ... 

Rapid purification Stir over CaH2 (5% w/v) overnight, filter, then distil at 20mmHg. Store the distd DMF over 3A or 4A molecular sieves. For solid phase synthesis, the DMF used must be of high quality and free from amines. 

---