1.3- Dipolar cycloadditions systems

Several five-membered ring systems readily available by 1,3-dipolar cycloadditions are shown in Scheme 10. The dotted line indicates how the system was constructed, the line bisecting the two new bonds being formed in the cycloaddition. The majority of chapters in these volumes make some reference to 1,3-dipolar cycloadditions. 

Scheme 10 Some five-membered ring systems available by 1,3-dipolar cycloadditions...

The reaction is illustrated by the intramolecular cycloaddition of the nitrilimine (374) with the alkenic double bond separated from the dipole by three methylene units. The nitrilimine (374) was generated photochemically from the corresponding tetrazole (373) and the pyrrolidino[l,2-6]pyrazoline (375) was obtained in high yield 82JOC4256). Applications of a variety of these reactions will be found in Chapter 4.36. Other aspects of intramolecular 1,3-dipolar cycloadditions leading to complex, fused systems, especially when the 1,3-dipole and the dipolarophile are substituted into a benzene ring in the ortho positions, have been described (76AG(E)123). 

Just as in the Diels-Alder reaction, 1,4-dipolar cycloadditions lead to six-membered rings. Their principal use in five-membered heterocycles is for ring annulations giving [5,6] ring-fused systems. 

The interaction of diazomethane with 1-azirines was the first example of a 1,3-dipolar cycloaddition with this ring system (64JOC3049, 68JOC4316). 1,3-Dipolar addition produces the triazoline adduct (87). This material can exist in equilibrium with its valence tautomer (88), and allylic azides (89) and (90) can be produced from these triazolines by ring cleavage. 

The 1,3-dipolar molecules are isoelectronic with the allyl anion and have four electrons in a n system encompassing the 1,3-dipole. Some typical 1,3-dipolar species are shown in Scheme 11.4. It should be noted that all have one or more resonance structures showing the characteristic 1,3-dipole. The dipolarophiles are typically alkenes or alkynes, but all that is essential is a tc bond. The reactivity of dipolarophiles depends both on the substituents present on the n bond and on the nature of the 1,3-dipole involved in the reaction. Because of the wide range of structures that can serve either as a 1,3-dipole or as a dipolarophile, the 1,3-dipolar cycloaddition is a very useful reaction for the construction of five-membered heterocyclic rings. 

When both the 1,3-dipoIe and the dipolarophile are unsymmetrical, there are two possible orientations for addition. Both steric and electronic factors play a role in determining the regioselectivity of the addition. The most generally satisfactory interpretation of the regiochemistry of dipolar cycloadditions is based on frontier orbital concepts. As with the Diels-Alder reaction, the most favorable orientation is that which involves complementary interaction between the frontier orbitals of the 1,3-dipole and the dipolarophile. Although most dipolar cycloadditions are of the type in which the LUMO of the dipolarophile interacts with the HOMO of the 1,3-dipole, there are a significant number of systems in which the relationship is reversed. There are also some in which the two possible HOMO-LUMO interactions are of comparable magnitude. 

Dipolar cycloaddUions. Interest in 1,3-dipolar cycloadditions increased dramatically during the past 20 years, largely because of the pioneering studies of Huisgen [7, 2] The versatility of this class of pericychc reactions in the synthesis of five-membered-ring heterocyclic compounds is comparable with that of the Diels-Alder reaction in the synthesis of six-membered-ring carbocyclic systems (equation 1)... 

Some 1,3-dipolar cycloadditions to hetero ft bond systems have been reported, including a couple of examples of additions of azides to the activated nitrile function of tnfluoroacetonitrile [30, 3I (equation 27)... 

This type of reaction is represented by 1,3-dipolar cycloadditions, corresponding to one of the Huisgen categories (69MI1). The 1,3-dipolar cycloaddition corresponds to the interaction between a 1,3-dipole and a multiple system five-membered ring closure (Scheme 1). 

Diethylamino-4-(4-methoxyphenyl)-isothiazole 5,5-dioxide 6 is (95T(51)2455) a highly reactive partner in 1,3-dipolar cycloadditions with several dipoles. Azomethine yhdes, such as oxazolones 7 and miinchnones 8, afforded with 6 bicychc pyrrolo[3,4-d]isothiazole 5,5-dioxides 9, 10, 11 in satisfactory yield. The regioselectivity of the reaction was excellent. The thermal behavior of these new bicychc systems was investigated. When heated at their melting point or shghtly above, triarylpyrroles 12, 13 were obtained through SOj and AtiV-diethylcyanamide ehmination. 

Several titanium(IV) complexes are efficient and reliable Lewis acid catalysts and they have been applied to numerous reactions, especially in combination with the so-called TADDOL (a, a,a, a -tetraaryl-l,3-dioxolane-4,5-dimethanol) (22) ligands [53-55]. In the first study on normal electron-demand 1,3-dipolar cycloaddition reactions between nitrones and alkenes, which appeared in 1994, the catalytic reaction of a series of chiral TiCl2-TADDOLates on the reaction of nitrones 1 with al-kenoyloxazolidinones 19 was developed (Scheme 6.18) [56]. These substrates have turned out be the model system of choice for most studies on metal-catalyzed normal electron-demand 1,3-dipolar cycloaddition reactions of nitrones as it will appear from this chapter. When 10 mol% of the catalyst 23a was applied in the reaction depicted in Scheme 6.18 the reaction proceeded to give a yield of up to 94% ee after 20 h. The reaction led primarily to exo-21 and in the best case an endo/ exo ratio of 10 90 was obtained. The chiral information of the catalyst was transferred with a fair efficiency to the substrates as up to 60% ee of one of the isomers of exo3 was obtained [56]. 

Whereas there are numerous examples of the application of the products from diastereoselective 1,3-dipolar cycloaddition reaction in synthesis [7, 8], there are only very few examples on the application of the products from metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction in the synthesis of potential target molecules. The reason for this may be due to the fact that most metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction have been carried out on model systems that have not been optimized for further derivatization. One exception of this is the synthesis of a / -lactam by Kobayashi and Kawamura [84]. The isoxazoli-dine endo-21h, which was obtained in 96% ee from the Yb(OTf)3-BINOL-catalyzed... 

The Cu(I)-catalyzed Huisgen [3 + 2] dipolar cycloaddition was also utilized by Van der Eycken and co-workers to obtain a new class of glycopep-tidomimetics based on the 1,2,3-triazole ring system 78 starting from glu-copyranosyl azide 75 and the pyrazinone compound 76 (Scheme 26) [58]. 

A family of interesting polycychc systems 106 related to pyrrolidines was obtained in a one-pot double intermolecular 1,3-dipolar cycloaddition, irradiating derivatives of o-allyl-sahcylaldehydes with microwaves in toluene for 10 min in presence of the TEA salt of glycine esters [71]. A very similar approach was previously proposed by Bashiardes and co-workers to obtain a one-pot multicomponent synthesis of benzopyrano-pyrrolidines 107 and pyrrole products 108 (Scheme 37). The latter cycloadducts were obtained when o-propargylic benzaldehydes were utihzed instead of o-allyhc benzalde-hydes, followed by in situ oxidation [72]. 

The authors have also elaborated a microwave-enhanced one-pot procedure [90] for the Huisgen 1,3-dipolar cycloaddition reaction. In a typical procedure, a pyrazinone with a triple bond connected to the core via C - O linkage, was reacted with a suitable benzylic bromide and NaNs in presence of the Cu(I) catalyst in a t Bu0H/H20 system under microwave irradiation (Scheme 26). The cycloaddition was found to proceed cleanly and with full regioselectivity. As the azide is generated in situ, this procedure avoids the isolation and purification of hazardous azides, which is especially important when handling the ahphatic ones, which are known to be toxic and explosive in nature. 

The reaction of the a-bromo aldoxime 52e (R = R = Me) with unsaturated alcohols has been extended to the heterocyclic systems furfuryl alcohols and 2-thiophene methanol [29b]. The furanyl and thiophenyl oximes 63a-c were treated with NaOCl and the resulting heterocyclic nitrile oxides were found to undergo spontaneous intramolecular dipolar cycloaddition to produce the unsaturated tricyclic isoxazolines 64a-c in high yield (Eq. 5). In these cases, the heterocyclic ring acts as the dipolarophile with one of the double bonds adding to the nitrile oxide [30]. 

Scheme 10.11 1,3-Dipolar cycloadditions of azomethine ylides with various dipo-larophiles in the presence of a Cu(I)-Fesulphos catalyst system.

In Chapter 10 of Part A, the mechanistic classification of 1,3-dipolar cycloadditions as concerted cycloadditions was developed. Dipolar cycloaddition reactions are useful both for syntheses of heterocyclic compounds and for carbon-carbon bond formation. Table 6.2 lists some of the types of molecules that are capable of dipolar cycloaddition. These molecules, which are called 1,3-dipoles, have it electron systems that are isoelectronic with allyl or propargyl anions, consisting of two filled and one empty orbital. Each molecule has at least one charge-separated resonance structure with opposite charges in a 1,3-relationship, and it is this structural feature that leads to the name 1,3-dipolar cycloadditions for this class of reactions.136... 

These results can be interpreted in terms of competition between recombination of the diradical intermediate and conformational equilibration, which would destroy the stereochemical relationships present in the azo compound. The main synthetic application of azo compound decomposition is in the synthesis of cyclopropanes and other strained-ring systems. Some of the required azo compounds can be made by 1,3-dipolar cycloadditions of diazo compounds (see Section 6.2). 

A series of 3-substituted-2-isoxazoles are prepared by the following simple procedure in situ conversion of nitroalkane to the silyl nitronate is followed by 1,3-dipolar cycloaddition to produce the adduct, which undergoes thermal elimination during distillation to furnish the isoxazole (Eq. 8.74). 5 Isoxazoles are useful synthetic intermediates (discussed in the chapter on nitrile oxides Section 8.2.2). Furthermore, the nucleophilic addition to the C=N bond leads to new heterocyclic systems. For example, the addition of diallyl zinc to 5-aryl-4,5-dihydroi-soxazole occurs with high diastereoselectivity (Eq. 8.75).126 Numerous synthetic applications of 1,3-dipolar cycloaddition of nitronates are summarized in work by Torssell and coworker.63a... 

Derivatives of the pyrrolo[2,l, 5-z/r quinolizinc system 88 were obtained from 2-benzoyl-iV-acetonylpyridinium bromide 86 in a single step through a tandem process of intramolecular aldol condensation and deprotonation, leading to intermediate 87, followed by 1,3-dipolar cycloaddition and oxidation (Scheme 6) <2001JPI1820>. 

Dipolar cycloaddition reaction of suitable dipolarophiles to azomethine imines is a well-known method leading to the pyrazolo[l,2-tf]pyrazole ring system and the methodology was duly reviewed in CHEC-II(1996) <1996CHEC-II(8)747>. During the covered period, some new applications have appeared. 

Formation of the ylide from the substituted pyrrolopyrazine 374 and subsequent [3+2] dipolar cycloaddition with a range of dipoloarophiles gives rise to the substituted 5 6 5 system 375 and the following examples are illustrative (Scheme 29) <1997T9341>. Reaction with acrylonitrile followed by oxidation with DDQ leads to the dihydroinda-cene 376. 

An approach by Kurth and co-workers toward the synthesis of bis-isoxazolo-substituted piperidinones 402 using a 1,3-dipolar cycloaddition approach provides ready access to the tricyclic system in good yield (Equation 108) <2000JOC499>. 

Scolastico s approach toward functionalized azabicycloalkane amino acids such as 407 using an intramolecular 1,3-dipolar cycloaddition strategy is a powerful way of synthesizing the linear system with good regio- and stereo-control (Equation 110) <2005JOC4124>. 

Many examples of asymmetric reactions catalyzed by copper complexes with chiral ligand systems have been reported. In particular, various copper-bis(oxazoline) catalysts (e.g., complexes (H) to (L), Scheme 48) are effective for carbon-carbon bond-forming reactions such as aldol,204 Mukaiyama-Michael, Diels-Alder,206 hetero Diels-Alder,207,208 dipolar cycloaddition,209,210... 

Intramolecular cycloadditions are among the most efficient methods for the synthesis of fused bicyclic ring systems [30]. From this perspective, the hetisine skeleton encompasses two key retro-cycloaddition key elements. (1) a bridging pyrrolidine ring accessible via a [3+2] azomethine dipolar cycloaddition and (2) a [2.2.2] bicyclo-octane accessible via a [4+2] Diels-Alder carbocyclic cycloaddition (Chart 1.4). While intramolecular [4+2] Diels—Alder cycloadditions to form [2.2.2] bicycle-octane systems have extensive precedence [3+2], azomethine dipolar cycloadditions to form highly fused aza systems are rare [31-33]. The staging of these two operations in sequence is critical to a unified synthetic plan. As the proposed [3+2] dipolar cycloaddition is expected to be the more challenging of the two transformations, it should be conducted in an early phase in the forward synthetic direction. As a result, a retrosynthetic analysis would entail initial consideration of the [4+2] cycloaddition to arrive at the optimal retrosynthetic C-C bond disconnections for this transformation. 

The reaction of methylenecyelopropane with azides is the earliest 1,3-dipolar cycloaddition reported so far on this system [53,54]. 

These experimental findings, as well as earlier data on alkylidenecyclopropanes, clearly disclose a peculiar effect of a cyclopropylidene system both on reaction rates and regioselectivity. In fact, the parent MCP as well as its derivatives exhibit a high reactivity in 1,3-dipolar cycloadditions with nitrones. In contrast, the related open chain isobutene and its derivatives are well known to enter 1,3-dipolar cycloadditions sluggishly [51c-d, 70]. For example, there is no chance to obtain a cycloadduct from 256 and an open chain trialkyl or tetraalkylethylene, as was obtained in the reaction of 256 with 270 and 271. 

---