Dipolar cycloadditions of nitrile oxides

A -Isoxazolines are readily available from the 1,3-dipolar cycloaddition of nitrile -oxides with alkenes and from the condensation reaction of ehones with hydroxylamine. Therefore, methods of conversion of -isoxazolines into isoxazoles are of particular interest and of synthetic importance. 

A variety of 1-azirines are available (40-90%) from the thermally induced extrusion (>100 °C) of triphenylphosphine oxide from oxazaphospholines (388) (or their acyclic betaine equivalents), which are accessible through 1,3-dipolar cycloaddition of nitrile oxides (389) to alkylidenephosphoranes (390) (66AG(E)1039). Frequently, the isomeric ketenimines (391) are isolated as by-products. The presence of electron withdrawing functionality in either or both of the addition components can influence the course of the reaction. For example, addition of benzonitrile oxide to the phosphorane ester (390 = C02Et) at... 

Zinc-tartrate complexes were applied for reactions of both nitrones and nitrile oxides with allyl alcohol and for both reaction types selectivities of more than 90% ee were obtained. Whereas the reactions of nitrones required a stoichiometric amount of the catalyst the nitrile oxide reactions could be performed in the presence of 20 mol% of the catalyst. This is the only example on a metal-catalyzed asymmetric 1,3-dipolar cycloaddition of nitrile oxides. It should however be no-... 

As discussed in Section 6.2, nitro compounds are good precursors of nitrile oxides, which are important dipoles in cycloadditions. The 1,3-dipolar cycloaddition of nitrile oxides with alkenes or alkynes provides a straightforward access to 2-isoxazolines or isoxazoles, respectively. A number of ring-cleaving procedures are applicable, such that various types of compounds may be obtained from the primary adducts (Scheme 8.18). There are many reports on synthetic applications of this reaction. The methods for generation of nitrile oxides and their reactions are discussed in Section 6.2. Recent synthetic applications and asymmetric synthesis using 1,3-dipolar cycloaddition of nitrile oxides are summarized in this section. 

Compared with the related reactions of nitrones, there have only appeared a few publications of metal-assisted or metal-catalyzed 1,3-dipolar cycloadditions of nitrile oxides. This is due to... 

It has recently been found that Et2Zn promotes the 1,3-dipolar cycloaddition of nitrile oxides to allyl alcohol in the presence of catalytic amounts of diisopropyl tartrate (DIPT). By this method, 2-isoxazlines are obtained in good yields and up to 96% ee (Eq. 8.73).124a A positive nonlinear effect (amplification of ee of the product) has been observed in this reaction. There is an excellent review on positive and negative nonlinear effects in asymmetric induction.124b... 

From the 1,3-dipolar cycloaddition of nitrile oxides to azomethines (imines) 291... 

Intermolecular Cycloaddition at the C=C Double Bond Addition at the C=C double bond is the main type of 1,3-cycloaddition reactions of nitrile oxides. The topic was treated in detail in Reference 157. Several reviews appeared, which are devoted to problems of regio- and stereoselectivity of cycloaddition reactions of nitrile oxides with alkenes. Two of them deal with both inter- and intramolecular reactions (158, 159). Important information on regio-and stereochemistry of intermolecular 1,3-dipolar cycloaddition of nitrile oxides to alkenes was summarized in Reference 160. 

Formation of mixtures of the above type, which is common with internal olefins, do not occur with many functionalized alkenes. Thus, tertiary cinnamates and cinnamides undergo cycloadditions with benzonitrile oxides to give the 5-Ph and 4-Ph regioisomers in a 25-30 75-70 ratio. This result is in contrast to that obtained when methyl cinnamate was used as the dipolarophile (177). 1,3-Dipolar cycloaddition of nitrile oxides to ethyl o -hydroxycinnamate proceeds regiose-lectively to afford the corresponding ethyl fra s-3-aryl-4,5-dihydro-5-(2-hydro-xyphenyl)-4-isoxazolecarboxylates 36 (178). Reaction of 4-[( )-(2-ethoxycarbo-nylvinyl)] coumarin with acetonitrile oxide gives 37 (R = Me) and 38 in 73% and 3% yields, respectively, while reaction of the same dipolarophile with 4-methoxy-benzonitrile oxide affords only 37 (R = 4-MeOCr>H4) (85%) (179). 

Regio- and diastereoselectivity in 1,3-dipolar cycloadditions of nitrile oxides to 4-substituted cyclopent-2-enones was studied (238, 239). The reactions are always regioselective, while the diastereofacial selectivity depends on the nature of the substituents. Thus, 4-hydroxy-4-methylcyclopent-2-enone (75) gives preferably adducts 76a, the 76a 76b ratio warying from 65 35 to 85 15 (Scheme 1.22). 

Aldimines, Ketimines, and Related Compounds as Dipolarophiles Reactions of aldimines with nitrile oxides proceed readily to give 1,2,4-oxadiazolines independently of the nature of substituents both in dipole and dipolarophile molecules. 1,2,4-Oxadiazolines were prepared by the regiospe-cihc 1,3-dipolar cycloaddition of nitrile oxides with fluoro-substituted aldimines (295). Phosphorylnitrile oxides gave with azomethines, PhCH NR, phosphory-lated 1,2,4-oxadiazolines 129 (296). Expected 1,2,4-oxadiazolines were also obtained from azomethines, derived from 4-formylcoumarine (179) and 1,3-diphenylpyrazole-4-carbaldehyde (297). 

Dipolar cycloaddition of nitrile oxide at the C=N bond of indole imino esters 130, followed by elimination of the alcohol moity gives oxadiazole derivatives 131 (Scheme 1.26) (298). Reaction of N-arylbenzamidines with arenenitrile N-oxides (generated in situ from oximoyl chlorides) produce unstable 5-amino-4,5-dihydro-1,2,4-oxadiazoles which, on aqueous acidic treatment hydrolyze to open-chain N-benzoyloxy-N -arylareneamidines (299). 

Poly(ethylene glycol) supported liquid-phase syntheses by both the reaction of (polyethylene glycol (PEG))-supported imines with nitrile oxides, generated in situ from aldoximes, (300) and 1,3-dipolar cycloadditions of nitrile oxide, generated in situ on soluble polymers with a variety of imines (301, 302) have been described. The solid-phase synthesis of 1,2,4-oxadiazolines via cycloaddition of nitrile oxide generated in situ on solid support with imines has also been elaborated (303). These syntheses of 1,2,4-oxadiazolines provide a library of 1,2,4-oxadiazolines in good yields and purity. 

A new route to 1,2,4-oxadiazoles and their complexes via Pt- and Pd-mediated 1,3-dipolar cycloaddition of nitrile oxides to organonitriles, has been reported. The sequence of the metal-mediated [2 + 3] cycloaddition offers an alternative route for the preparation of oxadiazoles. 

Pyrrolyl)-4,5-dihydroisoxazole derivatives 402 have been synthesized (Scheme 1.48) in good yields (66%-78%) by regioselective 1,3-dipolar cycloaddition of nitrile oxides to 1-phenylsulfony 1-1,3-dienes, followed by Barton-Zard pyrrole annulation using ethyl isocyanoacetate anion (444). 

Macrocycles containing isoxazoline or isoxazole ring systems, potential receptors in host—guest chemistry, have been prepared by multiple (double, triple or quadruple) 1,3-dipolar cycloadditions of nitrile oxides, (prepared in situ from hydroxamoyl chlorides) to bifunctional calixarenes, ethylene glycols, or silanes containing unsaturated ester or alkene moieties (453). This one-pot synthetic method has been readily extended to the preparation of different types of macrocycles such as cyclophanes, bis-calix[4]arenes and sila-macrocycles. The ring size of macrocycles can be controlled by appropriate choices of the nitrile oxide precursors and the bifunctional dipolarophiles. Multiple cycloadditive macrocy-clization is a potentially useful method for the synthesis of macrocycles. 

A rapid access to carbocyclic nucleosides, containing a fused isoxazoline ring has been proposed, starting from cyclopentadiene. The route involves a het-ero Diels-Alder cycloaddition reaction of nitrosocarbonylbenzene followed by a 1,3-dipolar cycloaddition of nitrile oxides, cleavage of the N-0 tether and transformation of the heterocyclic aminols into nucleosides via construction of purine and pyrimidine heterocycles (457). 

Dipolar cycloaddition of nitrile oxide 425 with allyl bromide followed by hydrogenation of dihydroisoxazole derivative 426 (Scheme 1.54) gives a pyrrol-substituted steroid derivative 427 (466). 

Four diastereoisomers of isoxazolinol 432 have been prepared via [3 + 2] dipolar cycloadditions of nitrile oxides. The ring 45,55 isomer shows the configuration of an isolated metabolite of roxifiban, a platelet glycoprotein receptor antagonist (470). 

A novel class of activators for chloride conductance in the cystic fibrosis transmembrane conductance regulator protein has been identified. These 3-(2-benzy-loxyphenyl)isoxazoles and 3-(2-benzyloxyphenyl)isoxazolines have been synthesized employing the 1,3-dipolar cycloaddition of nitrile oxides with various alkene and alkyne dipolarophiles (490). 

The synthesis of multivalent neoglycoconjugates by 1,3-dipolar cycloaddition of nitrile oxides and alkynes has been reported (493). The nitrile oxides have been generated in situ in the presence of alkynyl derivatives, allowing the access to homo and hetero multivalent systems containig O- and C-linked glycosides and isoxazole bridges. 

The 1,3-dipolar cycloaddition of nitrile oxides and 2-methylfuran provides suitable precursors for a-amino acids such as L-furanomycin 448 that contains a dihydrofuran ring (495). By using a chiral nitrile oxide derived from mannitol bis(acetonide), the enantiomerically pure furoisoxazoline 449 has been obtained. Hydroboration-oxidation of the latter leads to the hydroxy-substituted annulated THF derivative 450, which is converted via dihydrofuran 451 to furanomycin 448 in enantiomerically pure form (Scheme 1.55). 

The ability of nitrile oxides to undergo addition and cycloaddition reactions makes it possible to use them in polymer chemistry and technology. Major trends might be synthesis, modification, cross-linking of polymers, addition of nucleophiles, and 1,3-dipolar cycloaddition of nitrile oxides. Taking into account the scarcity of reviews devoted to this topic, not only recent but also previous references will be cited in this subsection. 

Aryl-5-cyano-2-isoxazolines, possessing liquid crystal properties (smectic phases A or E) have been synthesized, 1,3-dipolar cycloaddition of nitrile oxides to acrylonitrile being the key step (532). For example, nitrile 462 has been obtained in 66% yield from substituted benzaldoxime and acrylonitrile via in situ generated nitrile oxides. 

Using a stoichiometric amount of (i ,i )-DIPT as the chiral auxiliary, optically active 2-isoxazolines can be obtained via asymmetric 1,3-dipolar addition of achiral allylic alcohols with nitrile oxides or nitrones bearing an electron-withdrawing group (Scheme 5-53).86a Furthermore, the catalytic 1,3-dipolar cycloaddition of nitrile oxide has been achieved by adding a small amount of 1,4-dioxane (Scheme 5-53, Eq. 3).86b The presence of ethereal compounds such as 1,4-dioxane is crucial for the reproducibly higher stereoselectivity. 

The product is a mixture of stereoisomers. The chloro analog, antimetabolite acivicin, was prepared in a similar manner from vinylglycine and dichlor-oformaldoxime (80JOC4817 82TL4563). /3-Isoxazolylalanines were prepared by 1,3-dipolar cycloadditions of nitrile oxides to substituted acetamidomalonates (Scheme 23) (92JMC107). 

Dipolar cycloadditions of nitrile oxides 216 onto 1 gave much poorer yields of cycloadducts 217 than those of nitrones 205. The cycloadditions of 216 to 1 require higher temperatures and unfavorably compete with their dimerization to furoxanes. However, stable nitrile oxides 216 with bulky substituents R that hamper dimerization, can be used. The thermal rearrangements of 5-spirocyclopropane-annelated isoxazolines 217 always required higher temperatures than the isoxazolidine counterparts. Under these conditions the second cyclopropane ring was also cleaved to give furopyridines 218 (Scheme 48) [136, 137]. 

Scheme 48. 1,3-Dipolar cycloadditions of nitrile oxides 216 onto bicyclopropylidene (1) [136, 137]...

Isoxazoline derivatives of Cgo such as 250 (Scheme 4.40) are accessible by 1,3-dipolar cycloadditions of nitrile oxides to [6,6] double bonds of the fullerene [2, 278, 291-305]. The nitrile oxides 249 with R = methyl, ethyl, ethoxycarbonyl and anthryl are generated in situ from the corresponding nitroalkane, phenyl isocyanate and triethylamine. The isoxazoline derivative of Cgo 250 (with R = anthryl) crystallizes in black prisms out of a solvent mixture of CS2 and acetone (3 2) [292]. X-ray crystal structure analysis shows that addition of the nitrile oxide occurs on a [6,6] double bond of the fullerene framework. 

Dipolar Cycloaddition of Nitrile Oxides with Cyclic Dienes. 9.7 Homo [3+2] 1,3-Dipolar Cycloaddition. 9.8 [3+3] Cycloaddition... 

A previous review has highlighted the following methods of ring synthesis intramolecular cyclization of oximes, nitro alkenes, and nitrones, and [4+2] cycloaddition reactions <1996CHEC-II(6)279>. In addition to that, this review includes the intramolecular cyclization of hydroxylamines, hydroxamates, hetero-Diels-Alder [4+2], 1,3-dipolar cycloaddition of nitrile oxides to alkenes, and [3+3] cycloaddition reactions. This review does not cover cycloaddition reactions of the [4+2] [3+2] and [4+2] [3+2] [3+2] types which primarily led to heterocycle-fused oxazine ring systems. 

Dipolar Cycloaddition of Nitrile Oxides with Cyclic Dienes... 

The final example of the intramolecular 1,3-dipolar cycloadditions of nitrile oxides is the formation of the norbornadiene-derived tetracyclic adducts 146, described by Tam and co-workers (240,241). The nitrile oxide 145, formed from 144 by dehydration, can in principle give rise to four different cycloaddition products (three [2,3]-cycloaddition products). In practice, only diastereomer 146 was obtained. The reaction was used on substrates with a variety of different substituents (R=H, Me, hexyl. Cl, Br, C02Me, CH20Me), and in these cases, yields ranging between 66-89% were obtained (Scheme 12.48). 

Ukaji and co-workers (379-381) described the first, and so far only, metal-catalyzed asymmetric 1,3-dipolar cycloaddition of nitrile oxides with alkenes. Upon treatment of allyl alcohol with diethylzinc and (7 ,/ )-diisopropyl tartrate followed by the addition of diethylzinc and substimted hydroximoyl chlorides 274, the isoxazoli-dines 275 are formed with enantioselectivities of up to 96% ee (Scheme 12.87). 

---