Dioxides electrical properties

The main electroceramic apphcations of titanium dioxide derive from its high dielectric constant (see Table 6). Rutile itself can be used as a dielectric iu multilayer capacitors, but it is much more common to use Ti02 for the manufacture of alkaline-earth titanates, eg, by the cocalciuation of barium carbonate and anatase. The electrical properties of these dielectrics are extremely sensitive to the presence of small (<20 ppm) quantities of impurities, and high performance titanates require consistently pure (eg, >99.9%) Ti02- Typical products are made by the hydrolysis of high purity titanium tetrachloride. 

Alkaline-Earth Titanates. Some physical properties of representative alkaline-earth titanates ate Hsted in Table 15. The most important apphcations of these titanates are in the manufacture of electronic components (109). The most important member of the class is barium titanate, BaTi03, which owes its significance to its exceptionally high dielectric constant and its piezoelectric and ferroelectric properties. Further, because barium titanate easily forms solid solutions with strontium titanate, lead titanate, zirconium oxide, and tin oxide, the electrical properties can be modified within wide limits. Barium titanate may be made by, eg, cocalcination of barium carbonate and titanium dioxide at ca 1200°C. With the exception of Ba2Ti04, barium orthotitanate, titanates do not contain discrete TiO ions but ate mixed oxides. Ba2Ti04 has the P-K SO stmcture in which distorted tetrahedral TiO ions occur. 

Another approach developed by McIntosh and his co-workers 112-117) has been to measure the electrical properties of the adsorbates while they are adsorbed it is found that changes in the capacitance curves take place at the monolayer point. However, interpretation of the data to provide, say, the polarizability of the adsorbed species has proved to be difficult. An apparent dipole moment of infinity was obtained for sulfur dioxide adsorbed on rutile. It was concluded 116) that no satisfactory way of obtaining the apparent electrical properties of adsorbed matter has been developed, and until this is achieved, no great clarification of the observations seems likely. 

On the other hand, the alkoxide system presented several problems in formulation. The system first chosen as a model consisted of a trimethoxymethyl silane crosslinker, 8000 centistoke HEB siloxane, and a catalyst. A number of catalysts were used and each exhibited different cure rates and electrical properties. DuPont tetraalkoxytitante-Tyzor appears to he one of the better catalysts used in this type of curing system. Fillers are usually incorporated into the silicone formulation to improve mechanical properties, promote adhesion, and to serve as light screening and pigment agents. Cab-o-sil, a form of fumed silica, carbon-black, titanium dioxide and calcium carbonate are then used as RTV fillers. 

D.R. Lamb, Some electrical properties of the silicon-silicon dioxide system, Thin Solid Films, 5(4) (1970) 247-276. 

Xantheas and co-workers [159,160] have incorporated polarization in a model scheme and have used that to provide a clear basis for the enhancement of water s dipole in ice. A model potential with polarization has been reported for the formaldehyde dimer [161]. It is an example of a carefully crafted potential, which is system-specific because of its application to pure liquid formaldehyde, but which has terms associated with properties and interaction elements as in the above models. As well, some of the earliest rigid-body DQMC work, which was by Sandler et al. [162] on the nitrogen-water cluster, used a potential expressed in terms of interaction elements derived from ab initio calculations with adjustment (morphing). Stone and co-workers have developed interaction potentials for HF clusters [163], water [164], and the CO dimer [165], which involve monomer electrical properties and terms derived from intermolecular perturbation theory treatment. SAPT has been used for constructing potentials that have enabled simulations of molecules in supercritical carbon dioxide [166]. There are, therefore, quite a number of models being put forth wherein electrical analysis and/or properties of the constituents play an essential role, and some where electrical analysis is used to understand property changes as well as the interaction energetics. 

Additives. There are many types of additives used by the papermaker to modify the physical and optical properties of the sheet. The most commonly used include kaolin and titanium dioxide for optical properties, starch for strength and rosin sizes for water repellency. All these materials can affect the electrical properties of the paper since they can eventually modify the nature of the interfiber contact as well as the fiber itself. These changes can influence the flow of charge through the sheet. 

The electrical properties of the film were comparable to that of silicon dioxide films. Apparently, the obtained barrier aluminium oxide film can be seen as an excellent gate dielectric for organic field-effect transistors on flexible substrates. 

Lalauze R., Bui N., and Pijolat C., Interpretation of the electrical properties of a Sn02 gas sensor after treatment with sulfur dioxide, Sens. Actuators, 6, 119-125, 1984. 

In Barillaro et al. (2008), nitrogen dioxide detection by using p+-n silicon diodes surrounded by a PSi layer was demonstrated. Adsorption of NO2 in the PSi layer modifies the electrical properties of the PSi/crystalline silicon interface and, in turn, the p n diode current. The device shows a higher selectivity to NOj in comparison with ethanol, at any polarization voltage and relative humidity level. 

---