Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

3.3- Dimethyl- -1,1-dioxid

The conventional electrochemical reduction of carbon dioxide tends to give formic acid as the major product, which can be obtained with a 90% current efficiency using, for example, indium, tin, or mercury cathodes. Being able to convert CO2 initially to formates or formaldehyde is in itself significant. In our direct oxidation liquid feed fuel cell, varied oxygenates such as formaldehyde, formic acid and methyl formate, dimethoxymethane, trimethoxymethane, trioxane, and dimethyl carbonate are all useful fuels. At the same time, they can also be readily reduced further to methyl alcohol by varied chemical or enzymatic processes. [Pg.220]

The chemical recycling of carbon dioxide into usable fuels provides a renewable carbon base to supplement and eventually replace our diminishing natural hydrocarbon resources. Methanol (or dimethyl ether), as discussed, can be readily converted into ethylene or, by further reaction, into propylene. [Pg.220]

TTie reaction of 2.4-dimethylselenazole with an excess of benzaldehyde gives a monostyryl derivative exclusively (12). Oxidation of 2,4-dimethyl-selenazole with selenium dioxide yields 4-methylselenazole (Scheme 30) (4). [Pg.240]

Fig. 3.24 Test of the tensile strength hysteresis of hysteresis (Everett and Burgess ). TjT, is plotted against — Tq/Po where is the critical temperature and p.. the critical pressure, of the bulk adsorptive Tq is the tensile strength calculated from the lower closure point of the hysteresis loop. C), benzene O. xenon , 2-2 dimethyl benzene . nitrogen , 2,2,4-trimethylpentane , carbon dioxide 4 n-hexane. The lowest line was calculated from the van der Waals equation, the middle line from the van der Waals equation as modified by Guggenheim, and the upper line from the Berthelot equation. (Courtesy Everett.)... Fig. 3.24 Test of the tensile strength hysteresis of hysteresis (Everett and Burgess ). TjT, is plotted against — Tq/Po where is the critical temperature and p.. the critical pressure, of the bulk adsorptive Tq is the tensile strength calculated from the lower closure point of the hysteresis loop. C), benzene O. xenon , 2-2 dimethyl benzene . nitrogen , 2,2,4-trimethylpentane , carbon dioxide 4 n-hexane. The lowest line was calculated from the van der Waals equation, the middle line from the van der Waals equation as modified by Guggenheim, and the upper line from the Berthelot equation. (Courtesy Everett.)...
In contrast to the silver process, all of the formaldehyde is made by the exothermic reaction (eq. 23) at essentially atmospheric pressure and at 300—400°C. By proper temperature control, a methanol conversion greater than 99% can be maintained. By-products are carbon monoxide and dimethyl ether, in addition to small amounts of carbon dioxide and formic acid. Overall plant yields are 88—92%. [Pg.494]

Subsequent studies (63,64) suggested that the nature of the chemical activation process was a one-electron oxidation of the fluorescer by (27) followed by decomposition of the dioxetanedione radical anion to a carbon dioxide radical anion. Back electron transfer to the radical cation of the fluorescer produced the excited state which emitted the luminescence characteristic of the fluorescent state of the emitter. The chemical activation mechanism was patterned after the CIEEL mechanism proposed for dioxetanones and dioxetanes discussed earher (65). Additional support for the CIEEL mechanism, was furnished by demonstration (66) that a linear correlation existed between the singlet excitation energy of the fluorescer and the chemiluminescence intensity which had been shown earher with dimethyl dioxetanone (67). [Pg.266]

In the examples, a nitro group is substituted for a hydrogen atom, and water is a by-product. Nitro groups may, however, be substituted for other atoms or groups of atoms. In Victor Meyer reactions which use silver nitrite, the nitro group replaces a hahde atom, eg, I or Br. In a modification of this method, sodium nitrite dissolved in dimethyl formamide or other suitable solvent is used instead of silver nitrite (1). Nitro compounds can also be produced by addition reactions, eg, the reaction of nitric acid or nitrogen dioxide with unsaturated compounds such as olefins or acetylenes. [Pg.32]

Oxidation. Nitroparaffins are resistant to oxidation. At ordinary temperatures, they are attacked only very slowly by strong oxidi2ing agents such as potassium permanganate, manganese dioxide, or lead peroxide. Nitronate salts, however, are oxidi2ed more easily. The salt of 2-nitropropane is converted to 2,3-dimethyl-2,3-dinitrobutane [3964-18-9], acetone, and nitrite ion by persulfates or electrolytic oxidation. With potassium permanganate, only acetone is recovered. [Pg.100]

Sulfur dioxide occurs in industrial and urban atmospheres at 1 ppb—1 ppm and in remote areas of the earth at 50—120 ppt (27). Plants and animals have a natural tolerance to low levels of sulfur dioxide. Natural sources include volcanoes and volcanic vents, decaying organic matter, and solar action on seawater (28,290,291). Sulfur dioxide is beHeved to be the main sulfur species produced by oxidation of dimethyl sulfide that is emitted from the ocean. [Pg.147]

The solvent can be tailored to provide selective acid gas removal based on the Hquid—gas solubiHties. For example, the Selexol process, Hcensed by Union Carbide Corporation, uses the dimethyl ether of polyethylene glycol (DMPEG) to provide high hydrogen sulfide selectivity. The solubiHty of hydrogen sulfide in DMPEG is 8—10 times that of carbon dioxide. [Pg.212]

Acesulfame-K. Acesulfame-K [55589-62-3] (4), the potassium salt of acesulfame [33665-90-6] (6-methyl-l,2,3-oxathiaziQ-4(3ff)-one 2,2-dioxide), is a sweetener that resembles saccharin in stmcture and taste profile. 5,6-Dimethyl-l,2,3-oxathiazine-4(3ff)-one 2,2-dioxide, the first of many sweet compounds belonging to the dihydrooxathia2inone dioxide class, was discovered accidentally in 1967 (63). From these many sweet compounds, acesulfame was chosen for commercialisation. To improve water solubiUty, the potassium salt was made. Acesulfame-K (trade name Sunette) was approved for dry product use in the United States in 1988 and in Canada in October, 1994. Later, it was approved by the FDA for additional food categories such as yogurts, frosen and refrigerated desserts, and baked goods. [Pg.276]

The central carbon atom is derived from an aromatic aldehyde or a substance capable of generating an aldehyde during the course of the condensation. Malachite green is prepared by heating benzaldehyde under reflux with a slight excess of dimethyl aniline in aqueous acid (Fig. 2). The reaction mass is made alkaline and the excess dimethylaniline is removed by steam distillation. The resulting leuco base is oxidized with freshly prepared lead dioxide to the carbinol base, and the lead is removed by precipitation as the sulfate. Subsequent treatment of the carbinol base with acid produces the dye, which can be isolated as the chloride, the oxalate [2437-29-8] or the zinc chloride double salt [79118-82-4]. [Pg.270]

Organic acids, including carbon dioxide, lower the wort pH during fermentation. The principal acids formed are lactic, pymvic citric, malic, and acetic acids, at concentrations ranging from 100—200 ppm. The main sulfur compounds formed during fermentation and thek perception thresholds are as follows H2S (5—10 ppb) ethanethiol (5—10 ppb) dimethyl sulfoxide (35—60 ppb) and diethyl sulfide (3—30 ppb). At low levels, these may have a deskable flavor effect at higher levels they are extremely undeskable. Sulfur dioxide also forms during fermentation, at concentrations of 5—50 ppm its presence can be tasted at levels above 50 ppm. [Pg.391]

Penam Sulfone B-Lactamase Inhibitors. Natural product discoveries stimulated the rational design of p-lactamase inhibitors based on the readily accessible penicillin nucleus. An early success was penicillanic acid sulfone, (2(5)-cis)-3,3-dimethyl-7-oxo-4,4-dioxide-4-thia-l-a2abicyclo [3.2.0]heptane-2-carboxylic acid [68373-14-8] (sulbactam) (25, R = = H, R" = R" = CH ), CgH NO S. The synthesis (118), microbiology (119—121),... [Pg.51]

Dimethyl carbonate [616-38-6] and dimethyl oxalate [553-90-2] are both obtained from carbon monoxide, oxygen, and methanol at 363 K and 10 MPa (100 atm) or less. The choice of catalyst is critical cuprous chloride (66) gives the carbonate (eq. 20) a palladium chloride—copper chloride mixture (67,68) gives the oxalate, (eq. 21). Anhydrous conditions should be maintained by removing product water to minimize the formation of by-product carbon dioxide. [Pg.53]

Other Rea.ctlons, The anhydride of neopentanoic acid, neopentanoyl anhydride [1538-75-6] can be made by the reaction of neopentanoic acid with acetic anhydride (25). The reaction of neopentanoic acid with acetone using various catalysts, such as titanium dioxide (26) or 2irconium oxide (27), gives 3,3-dimethyl-2-butanone [75-97-8] commonly referred to as pinacolone. Other routes to pinacolone include the reaction of pivaloyl chloride [3282-30-2] with Grignard reagents (28) and the condensation of neopentanoic acid with acetic acid using a rare-earth oxide catalyst (29). Amides of neopentanoic acid can be prepared direcdy from the acid, from the acid chloride, or from esters, using primary or secondary amines. [Pg.103]

The methiodide of 2,5-dihydrothiophene (239) is transformed in high yield to Z)-l-(methylthio)buta-l,3-diene (240) on treatment with alkali (81AJC1017). The thermal cheletropic extrusion of sulfur dioxide from both cis and trans isomers of 2,5-dihy-drothiophene 1,1-dioxides is highly stereospecific. For example, c/5-2,5-dimethyl-2,5-dihydrothiophene 1,1-dioxide (241) yields ( , )-hexa-2,4-diene (242) and sulfur dioxide (75JA3666, 75JA3673). [Pg.86]

Few isothiazoles undergo simple cycloaddition reactions. 4-Nitroisothiazoles add to alkynes (see Section 4.17.7.4). With 5-thiones (84) and dimethyl acetylenedicarboxylate, addition to both sulfur atoms leads to 1,3-dithioles (85) (77SST(4)339, 80H(14)785, 81H(16)156, 81H(16)595). Isothiazol-3-one 1-oxide and the corresponding 1,1-dioxide give normal adducts with cyclopentadiene and anthracene (80MI41700), and saccharin forms simple 1 1 or 1 2 adducts with dimethyl acetylenedicarboxylate (72IJC(B)881). [Pg.152]

Isothiazolidinones have been desulfurized by Raney nickel (74JOC1210). The 2,1-benzisothiazoline 2,2-dioxide (158) undergoes photocycloaddition with dimethyl acetyl-enedicarboxylate and loss of sulfur dioxide to give a compound of probable structure (168) (80CC471). [Pg.165]


See other pages where 3.3- Dimethyl- -1,1-dioxid is mentioned: [Pg.163]    [Pg.722]    [Pg.140]    [Pg.722]    [Pg.139]    [Pg.722]    [Pg.722]    [Pg.326]    [Pg.134]    [Pg.78]    [Pg.455]    [Pg.9]    [Pg.492]    [Pg.95]    [Pg.111]    [Pg.202]    [Pg.283]    [Pg.86]    [Pg.19]    [Pg.19]    [Pg.76]    [Pg.125]    [Pg.250]    [Pg.303]    [Pg.305]    [Pg.315]    [Pg.148]    [Pg.165]    [Pg.152]    [Pg.155]    [Pg.180]   
See also in sourсe #XX -- [ Pg.1237 ]




SEARCH



2- Fluoro-3,3-dimethyl-2,3-dihydro-l,2-benzisothiazole 1,1-dioxide,

Dimethyl carbonate preparation from carbon dioxide

Nitrogen dioxide Dimethyl sulfoxide

Pyrazine dioxide, 2,5-dimethyl

Pyridazine 1,2-dioxide, 3,6-dimethyl

Supercritical carbon dioxide dimethyl carbonate reaction

© 2024 chempedia.info