1.2- dihydronaphthalen

Both 1 2 dihydronaphthalene and 1 4 dihydronaphthalene may be selectively hydrogenated to 1 2 3 4 tetrahydronaphthalene... 

Electrochemical oxidation of 1,2-dihydronaphthalene or an indene in acetoni-tnle containing triethylamine tris(hydrogen fluoride) provides a mixture of tereoisomeric difluorides and vicinal fluoroacetamides [201] (equation 38)... 

Dihydronaphthalene is often used as a model olefin in the study of epoxidation catalysts, and very often gives product epoxides in unusually high ee s. In 1994, Jacobsen discovered in his study on the epoxidation of 1,2-dihydronaphthalene that the ee of the epoxide increases at the expense of the minor enantiomeric epoxide.Further investigation led to the finding that certain epoxides, especially cyclic aromatically conjugated epoxides, undergo kinetic resolution via benzylic hydroxylation up to a krei of 28 (Scheme 1.4.9). 

I, 4- and 3,4-Dihydroquinazolines are tautomeric but any attempts to prepare the former w ithout a 1-substituent have led to the latter. The greater stability to proto tropic change of 1,2-dihydronaphthalene over 1,4-dihydronaphthalene is also found in 3,4-dihydroquinazoline. Earlier claims to the preparation of l,4-dihydroquinazolines ° were erroneous and based on incomplete experimental data. The first 1,4-dihydroquinazoline was prepared as recently as 1961. 1-Methyl and l-benzyl-l,4-dihydroquinazolines were obtained from o-methylamino-and o-benzylamino-benzylamines (42) by formylation and ring closure. Attempts to remove the benzyl group gave 3,4-dihydroquinazoline. These 1,4-dihydro compounds are susceptible to oxidation, and attempts made to prepare 1,2-dimethyl-1,4-dihydroquinazoline from o-... 

Asymmetric epoxidation of olefins with ruthenium catalysts based either on chiral porphyrins or on pyridine-2,6-bisoxazoline (pybox) ligands has been reported (Scheme 6.21). Berkessel et al. reported that catalysts 27 and 28 were efficient catalysts for the enantioselective epoxidation of aryl-substituted olefins (Table 6.10) [139]. Enantioselectivities of up to 83% were obtained in the epoxidation of 1,2-dihydronaphthalene with catalyst 28 and 2,6-DCPNO. Simple olefins such as oct-l-ene reacted poorly and gave epoxides with low enantioselectivity. The use of pybox ligands in ruthenium-catalyzed asymmetric epoxidations was first reported by Nishiyama et al., who used catalyst 30 in combination with iodosyl benzene, bisacetoxyiodo benzene [PhI(OAc)2], or TBHP for the oxidation of trons-stilbene [140], In their best result, with PhI(OAc)2 as oxidant, they obtained trons-stilbene oxide in 80% yield and with 63% ee. More recently, Beller and coworkers have reexamined this catalytic system, finding that asymmetric epoxidations could be perfonned with ruthenium catalysts 29 and 30 and 30% aqueous hydrogen peroxide (Table 6.11) [141]. Development of the pybox ligand provided ruthenium complex 31, which turned out to be the most efficient catalyst for asymmetric... 

The reaction of butyllithium with 1-naphthaldehyde cyclohexylimine in the presence of (/C )-l,2-diphenylethane-1,2-diol dimethyl ether in toluene at —78 °C, followed by treatment with acetate buffer, gave 2-butyl-1,2-dihydronaphthalene-l-carbaldehyde, which was then reduced with sodium borohydride in methanol to afford (1 R,2.S)-2-butyl-1 -hydroxymcthyl-1,2-dihydronaphthalene in 80% overall yield with 91 % ee83. Similarly, the enantioselective conjugate addition of organolithium reagents to several a,/J-unsaturated aldimines took place in the presence of C2-symmetric chiral diethers, such as (/, / )-1,2-butanediol dimethyl ether and (/, / )- ,2-diphenylethane-1,2-diol dimethyl ether. 

Similarly, 1-vinylcyclohexane can be trapped with dimethyl acetylenedicarboxylate in refluxing xylene to afford 195 in 78% yield (equation 126)119. Benzo[ ]anthracene can be obtained by the reaction of 196 and 1,2-dihydronaphthalene (equation 127) and oxidation of 197 with 2,3-dichloro-5,6-dicyano-l,4-benzoquinone120. 

Compounds lb and 2b were the Urst fluorinated ligands tested in Mn-catalyzed alkene epoxidation [5,6]. The biphasic Uquid system perfluorooc-tane/dichloromethane led to excellent activity and enantioselectivity (90% ee) in the epoxidation of indene with oxygen and pivalaldehyde (Scheme 1, Table 1). In addition, the fluorous solution of the catalyst was reused once and showed the same activity and selectivity. This represents a considerable improvement over the behavior in the homogeneous phase, where the used catalyst was bleached and reuse was impossible. Unfortunately, indene was the only suitable substrate for this system, which failed to epoxidize other alkenes (such as styrene or 1,2-dihydronaphthalene) with high enantioselectivity. The system was also strongly dependent on the oxidant and only 71% ee was obtained in the epoxidation of indene with mCPBA at - 50 °C. 

Numbers separated by dashes indicate results in successive reuses 1,2-Dihydronaphthalene... 

In spite of these limitations, three examples of (salen)-metal complex adsorption have been described. In the first one, Jacobsen s complex (la-MnCl) was adsorbed on Al-MCM-41 [27] by impregnation with a solution of the complex in dichloromethane, an approach that prevents the possible cationic exchange. The results in the epoxidation of 1,2-dihydronaphthalene with aqueous NaOCl were comparable to those obtained in solution, with only a slight reduction in enantioselectivity (55% ee instead of 60% ee). However, recycling of this catalyst was not described. 

Eaton SL, SM Resnick, DT Gibson (1996) Initial reactions in the oxidation of 1,2-dihydronaphthalene by Sphingomonas yanoikuyae strains. Appl Environ Microbiol 62 4388-4394. 

Aryl-substituted methylenecyclopropanes 132 can undergo intramolecular cycloisomerisation in catalytic presence of NHC-Pd complex 133 to form 1,2-dihydronaphthalenes 134 in moderate yields (Scheme 5.35) [40],... 

A number of basic studies in the area of donor solvent liquefaction have been reported (2 -9). Franz (10J reported on the interaction of a subbituminous coal with deuterium-labelled tetra-lin, Cronauer, et al. (11) examined the interaction of deuterium-labelled Tetralin with coal model compounds and Benjamin, et al. (12) examined the pyrolysis of Tetralin-l-13C and the formation of tetralin from naphthalene with and without vitrinite and hydrogen. Other related studies have been conducted on the thermal stability of Tetralin, 1,2-dihydronaphthalene, cis-oecalin and 2-methylin-dene (13,14). 

Another hydrogen atom lost from the a- or 0-Tetralinyl radicals forms either 1,2-dihydronaphthalene by reaction 1 or 1,2- and 1,4-dihydronaphthalene by reactions 2A and 2B. Loss of two more alkyl hydrogens forms naphthalene. The dihydronaphthalenes, which have been detected in low concentrations (6), were not observed under our experimental conditions. 

The basic reactions of Tetralin and derivatives have been extended to the use of 1-13C labels and 1,2-dihydronaphthalene, with and without a source of free radicals. The studies with Tetralin were monitored equally well with C-NMR and GLC techniques. The rate constant for the conversion of Tatralin to methyl indan in the presence of dibenzyl at 450°C was 6.4 x 10 min i which is consistent with that previously reported [2]. 

Several exploratory experiments were made with unlabeled 1,2-dihydronaphthalene, either neat or with 10% dibenzyl, at 450°C. The runs were made using an agitated 10 cc reactor which was immersed in a preheated sand bath to achieve rapid heating and cooling. It is first noted that the products from... 

The behavior of the isomeric dihydronaphthalenes emphasizes the importance of the relative stabilities of carbocation intermediates in ionic hydrogenations. Treatment of 1,2-dihydronaphthalene with Et3SiH/TFA at 50-60° gives a 90% yield of tetralin after one hour. Under the same conditions, the 1,4-dihydronaphthalene isomer gives less than 5% of tetralin after 70 hours.224 This difference in reactivity is clearly related to the relatively accessible benzylic cation formed upon protonation of the 1,2-isomer compared to the less stable secondary cation formed from the 1,4-isomer.224... 

Now the interesting question arose of whether the intermediate analogous to 215 but devoid of the methyl groups, that is, 3d2-l H-naphthalene (221), would also be interceptable, because 221 should show a high thermodynamic acidity owing to its conversion into the 2-naphthyl anion (224) on deprotonation and because of the use of the strong base KOtBu for the liberation of 221 from 3-bromo-l, 2-dihydro-naphthalene (220) (Scheme 6.52). In the event, the major product was indeed naphthalene. However, there were further products, namely the enol ether 223 and small quantities of 2,2 -binaphthyl (228) as well as 1,2-dihydronaphthalene (226). The overall yield amounted to 92% [137]. 

Specific acid-catalysed solvolysis of l-methoxy-l,4-dihydronaphthalene or 2-methoxy-l,2-dihydronaphthalene in 25% acetonitrile in water has been found to yield mainly the elimination product, naphthalene, along with a small amount of 2-hydroxy-1,2-dihydronaphthalene, there being no trace of either the 1-hydroxy-1,4-dihydronaphthalene or the rearranged ether. The nucleophilic selectivity, ns/ hoh = 2.1 X 10", between added azide ion and solvent water has been estimated for the relatively stable = 1 x 10 s ) intermediate benzallylic carbocation for which the barrier to dehydronation is unusually low k = 1.6 x 10 ° s ), as evidenced by the large elimination-to-substitution ratio with solvent water as base/nucleophile. The kinetics of acid-catalysed solvolysis of 1-hydroxy-1,4-dihydronaphthalene and 2-hydroxy-1,2-dihydronaphthalene have also been studied. 

In a static-culture-flask screening test, naphthalene (5 and 10 mg/L) was statically incubated in the dark at 25 °C with yeast extract and settled domestic wastewater inoculum. After 7 d, 100% biodegradation with rapid adaptation was observed (Tabak et al, 1981). In freshwater sediments, naphthalene biodegraded to c/5-1,2-dihydroxy-1,2-dihydronaphthalene, 1-naphthol, salicylic acid, and catechol. 

---