Diffuse double layer diffusion

This produces a double layer of charge, one localized on the surface of the plane and the other developed in a diffuse region extending into solution. 

The treatment in the case of a plane charged surface and the resulting diffuse double layer is due mainly to Gouy and Qiapman. Here may be replaced by d /dx since is now only a function of distance normal to the surface. It is convenient to define the quantities y and yo as... 

The quantity 1 /k is thus the distance at which the potential has reached the 1 je fraction of its value at the surface and coincides with the center of action of the space charge. The plane at a = l//c is therefore taken as the effective thickness of the diffuse double layer. As an example, 1/x = 30 A in the case of 0.01 M uni-univalent electrolyte at 25°C. 

By analogy with the Helmholtz condenser formula, for small potentials the diffuse double layer can be likened to an electrical condenser of plate distance /k. For larger yo values, however, a increases more than linearly with o, and the capacity of the double layer also begins to increase. 

IHP) (the Helmholtz condenser formula is used in connection with it), located at the surface of the layer of Stem adsorbed ions, and an outer Helmholtz plane (OHP), located on the plane of centers of the next layer of ions marking the beginning of the diffuse layer. These planes, marked IHP and OHP in Fig. V-3 are merely planes of average electrical property the actual local potentials, if they could be measured, must vary wildly between locations where there is an adsorbed ion and places where only water resides on the surface. For liquid surfaces, discussed in Section V-7C, the interface will not be smooth due to thermal waves (Section IV-3). Sweeney and co-workers applied gradient theory (see Chapter III) to model the electric double layer and interfacial tension of a hydrocarbon-aqueous electrolyte interface [27]. 

Charged surface plus diffuse double layer of ions —>... 

In the case of a charged particle, the total charge is not known, but if the diffuse double layer up to the plane of shear may be regarded as the equivalent of a parallel-plate condenser, one may write... 

Derive the general equation for the differential capacity of the diffuse double layer from the Gouy-Chapman equations. Make a plot of surface charge density tr versus this capacity. Show under what conditions your expressions reduce to the simple Helmholtz formula of Eq. V-17. 

The repulsion between oil droplets will be more effective in preventing flocculation Ae greater the thickness of the diffuse layer and the greater the value of 0. the surface potential. These two quantities depend oppositely on the electrolyte concentration, however. The total surface potential should increase with electrolyte concentration, since the absolute excess of anions over cations in the oil phase should increase. On the other hand, the half-thickness of the double layer decreases with increasing electrolyte concentration. The plot of emulsion stability versus electrolyte concentration may thus go through a maximum. 

Splelman L A and Friedlander S K 1974 Role of the electrical double layer In particle deposition by convective diffusion J. Colloid. Interfaoe. Sol. 46 22-31... 

Rheology. Flow properties of latices are important during processing and in many latex appHcations such as dipped goods, paint, inks (qv), and fabric coatings. For dilute, nonionic latices, the relative latex viscosity is a power—law expansion of the particle volume fraction. The terms in the expansion account for flow around the particles and particle—particle interactions. For ionic latices, electrostatic contributions to the flow around the diffuse double layer and enhanced particle—particle interactions must be considered (92). A relative viscosity relationship for concentrated latices was first presented in 1972 (93). A review of empirical relative viscosity models is available (92). In practice, latex viscosity measurements are carried out with rotational viscometers (see Rpleologicalmeasurement). 

Fig. 7. (a) Simple battery circuit diagram where represents the capacitance of the electrical double layer at the electrode—solution interface, W depicts the Warburg impedance for diffusion processes, and R is internal resistance and (b) the corresponding Argand diagram of the behavior of impedance with frequency, for an idealized battery system, where the characteristic behavior of A, ohmic B, activation and C, diffusion or concentration (Warburg... 

Fig. 1. Schematic representation of the electrochemical or diffuse double layer showing the inner (IHP) and outer (OHP) Helmholtz planes and the...

F r d ic Current. The double layer is a leaky capacitor because Faradaic current flows around it. This leaky nature can be represented by a voltage-dependent resistance placed in parallel and called the charge-transfer resistance. Basically, the electrochemical reaction at the electrode surface consists of four thermodynamically defined states, two each on either side of a transition state. These are (11) (/) oxidized species beyond the diffuse double layer and n electrons in the electrode and (2) oxidized species within the outer Helmholtz plane and n electrons in the electrode, on one side of the transition state and (J) reduced species within the outer Helmholtz plane and (4) reduced species beyond the diffuse double layer, on the other. 

The physical separation of charge represented allows externally apphed electric field forces to act on the solution in the diffuse layer. There are two phenomena associated with the electric double layer that are relevant electrophoresis when a particle is moved by an electric field relative to the bulk and electroosmosis, sometimes called electroendosmosis, when bulk fluid migrates with respect to an immobilized charged surface. 

Two kinds of barriers are important for two-phase emulsions the electric double layer and steric repulsion from adsorbed polymers. An ionic surfactant adsorbed at the interface of an oil droplet in water orients the polar group toward the water. The counterions of the surfactant form a diffuse cloud reaching out into the continuous phase, the electric double layer. When the counterions start overlapping at the approach of two droplets, a repulsion force is experienced. The repulsion from the electric double layer is famous because it played a decisive role in the theory for colloidal stabiUty that is called DLVO, after its originators Derjaguin, Landau, Vervey, and Overbeek (14,15). The theory provided substantial progress in the understanding of colloidal stabihty, and its treatment dominated the colloid science Hterature for several decades. 

Eleetrostatie eharaeterization of partieles is eommonly determined via their eleetrokinetie or zeta potential i.e. the potential of a slipping plane, notionally loeated slightly away from the partiele surfaee approximately at the beginning of the diffuse part of the double layer using, for example, eleetrophoresis. In some eases, zeta potential ean be used as a eriterion for aggregation. 

The model just presented describes what electrochemists call the diffuse part of the double layer and no account is made of the inner layer effects such as the plane of the closest approach. To have an idea what the impact of the effects predicted by this model on the measured capacitance could be, we assume the traditional inner and diffuse layer separation. However, we... 

Fig. 20.8 Gouy-Chapman diffuse layer model of the double layer...

---