Dienes intramolecular alkene addition

As discussed in Section 6.9 1, 3-dienes and dienophiles in which multiple bonds are not activated by electron-withdrawing or electron-releasing substituents fail to undergo cycloaddition except under the most severe conditions. Particular difficulty is encountered in the cycloaddition of two unactivated species since homodimerization can be a competitive and dominant reaction pathway. The use of transition-metal catalysts, however, has proved to be a valuable solution. Complexation of unactivated substrates to such catalysts promotes both inter- and intramolecular cycloadditions. Consequently, the cycloaddition of such unactivated compounds, that is, simple unsubstituted dienes and alkenes, catalyzed by transition metals is a major, important area of study.655 In addition, theoretical problems of the transformation have frequently been addressed in the more recent literature. 

The use of isopropylidine acetals (112) as tethers in the intramolecular Diels-Alder reactions of dienes with alkenes facilitates the formation of civ-fused cycloadducts (113) from an endo transition state (Scheme 41).218 The intramolecular Diels-Alder reaction of 4-[tris-(2-mcthylcthyl)silyl]oxy-2//-thiopyran derivatives with potential dienophiles tethered at C(2), C(3), C(5), and C(6) positions yielded cycloadducts when the dienophiles were activated with a carbomethoxy group.219 By the substitution of a phenylsulfonyl group on the dienophile of 2-benzopyran-3-ones, it is possible to enhance exo addition during intramolecular Diels-Alder cyclizations to yield a predominance of trans-fused hexaphenanthrenes related to natural products.220 The intramolecular Diels-Alder reaction of 2-furfuryl fumarates has been investigated by molecular mechanics (SIBFA)/continuum reaction field computations.221 The intramolecular 4 + 2-photo-cycloaddition of A-benzylcinnamamides (114) in the presence of C(,H6 gives 3-azatricyclo[5.2.2.01,5]undeca-8,10-dien-4-ones (115) with high stereoselectivity (Scheme 42).222... 

As a related reaction, the bicyclo[5.3.0]decane derivative 64 was obtained at 30 °C by the Rh-catalysed intramolecular [5+2] cycloaddition of the alkyne with the vinylcyclopropane moiety in 61. The latter behaves as a pseudo-1,3-diene in oxidative addition, and generates 62. This is followed by rearrangement to 63, whose reductive elimination gives 64 [20]. [Rh(CO)2Cl]2 is a better catalyst than RhCUPl+P. The reaction can be extended to alkenes [20a],... 

In more complex reaction cascades an additional alkyne-insertion step can occur. Thus starting with intramolecular carbopalladation of a vinyl iodide to a carbon-carbon triple bond, followed by two intramolecular alkene-insertion steps and termination with dehydropalladation, a palladium-catalyzed synthesis of l-(5 -methylbicyclo[3.1.0]hex-T-yl)-5,5-bis(carboethoxy)cyclo-hexadiene (52) starting from l-iodo-4,4-bis(carboethoxy)-ll-methyldodeca-l,ll-dien-6-yne (51) is achieved. ... 

The Diels-Alder reaction is a thermal cycloaddition involving 1,3-dienes and alkenes, and [3+21-cyclo-addition reactions involve a Ji bond and a 1,3-dipole. The Cope, oxy-Cope, and Claisen rearrangements are thermal, intramolecular reactions of 1,5-dienes. [2+2]-Cycloadditions usually involve reaction between two alkenes, or certainly two Ji bonds. A reaction that is different from any seen so far occurs with certain alkenes and allylic systems. In its fundamental form, it is "the indirect substituting of a compound with a double bond... 

The reductive coupling of bis(enones) is another reaction class that may involve alkene-derived metallacyclopentanes. Treatment of a symmetrical bis(enone) 89 tvith bis(r] -cy-cloocta-l,5-diene)nickel(0) (2) and butyllithium/zinc(II) chloride leads to coupling of the two enone -carbons followed by an intramolecular aldol addition to afford bicyclo[3.3.0]-octanols 90 (Scheme Sterically hindered enones have also been shovm to partic-... 

In the presence of a double bond at a suitable position, the CO insertion is followed by alkene insertion. In the intramolecular reaction of 552, different products, 553 and 554, are obtained by the use of diflerent catalytic spe-cies[408,409]. Pd(dba)2 in the absence of Ph,P affords 554. PdCl2(Ph3P)3 affords the spiro p-keto ester 553. The carbonylation of o-methallylbenzyl chloride (555) produced the benzoannulated enol lactone 556 by CO, alkene. and CO insertions. In addition, the cyclobutanone derivative 558 was obtained as a byproduct via the cycloaddition of the ketene intermediate 557[4I0]. Another type of intramolecular enone formation is used for the formation of the heterocyclic compounds 559[4l I]. The carbonylation of the I-iodo-1,4-diene 560 produces the cyclopentenone 561 by CO. alkene. and CO insertions[409,4l2]. 

Under the influence of nickel catalysts, 1,5- and 1,6-dienes undergo isomerization and cyclization, preferably to five-membered ring compounds. The cyclization takes place probably via an intramolecular insertion reaction ( , ) involving a ir-5-alken-l-ylnickel complex such as 33, Table III, and 34, Table IV formed by Ni — C, and Ni — C2 additions... 

The above intramolecular diene cyclizations are likely to proceed through a similar set of reactions as shown in Scheme 6.2 for the intermolecular variants. Thus, as depicted in Scheme 6.6, formation of the zirconacyclopropane at the less hindered terminal alkene (—> ii), generation of the tricyclic intermediate iii, Zr—Mg exchange through the intermediacy of zirconate iy and 3-H abstraction and Mg alkoxide elimination in v may lead to the formation of the observed product. Additional kinetic and mechanistic studies are required before a more detailed hypothesis can be put forward. 

The consecutive reaction of vinyl halides and alkenes with activated methylene systems [42] in the presence of a palladium catalyst and phase-transfer catalyst results from the addition of the methylene carbanion with the initially formed Heck product (Scheme 6.31) an intramolecular version of the reaction leads to the formation of bicycloalk-l-enes (Scheme 6.31) [42], The analogous combined coupling reaction of iodoarenes and activated methylene compounds with non-conjugated dienes under similar conditions forms the monoalkene (Scheme 6.31) [43]. 

The first example involving a rhodium catalyst in an ene reaction was reported by Schmitz in 1976. An intramolecular cyclization of a diene occurred to give a pyrrole when exposed to rhodium trichloride in isobutanol (Eq. 2) [15]. Subsequently to this work, Grigg utilized Wilkinson s catalyst to effect a similar cycloisomerization reaction (Eq. 3) [16]. Opplozer and Eurstner showed that a n -allyl-rhodium species could be formed from an allyl carbonate or acetate and intercepted intramolecularly by an alkene to afford 1,4-dienes (Eq. 4). Hydridotetrakis(triphenylphosphine)rhodium(l) proved to be the most efficient catalyst for this particular transformation. A direct comparison was made between this catalyst and palladium bis(dibenzylidene) acetone, in which it was determined that rhodium might offer an additional stereochemical perspective. In the latter case, this type of reaction is typically referred to as a metallo-ene reaction [17]. 

Esteruelas and coworkers reported the stoichiometric Diels-Alder type addition of dienes to the Cp-Cy double bond of allenylidene complexes to give the corresponding substituted vinylidene complexes (Equation 7.7) [33]. The results of this stoichiometric reaction prompted us to investigate the diruthenium complex-catalyzed allenylidene-ene reaction between alkenes and the Cp-Cy double bond of an allenylidene moiety. Results of inter- and intramolecular allenylidene-ene reactions providing novel coupling products between alkynes and alkenes are described in this section [34]. 

The intramolecular addition of carbon nucleophiles to alkenes has received comparatively little attention relative to heterocyclization reactions. The first examples of Pd-catalyzed oxidative carbocyclization reactions were described by Backvall and coworkers [164-166]. Conjugaled dienes with appended al-lyl silane and stabilized carbanion nucleophiles undergo 1,4-carbochlorination (Eq. 36) and carboacetoxylation (Eq. 37), respectively. The former reaction employs BQ as the stoichiometric oxidant, whereas the latter uses O2. The authors do not describe efforts to use molecular oxygen in the reaction with allyl silanes however, BQ was cited as being imsuccessful in the reaction with stabihzed car-banions. Benzoquinone is known to activate Ti-allyl-Pd intermediates toward nucleophilic attack (see below. Sect. 4.4). In the absence of BQ, -hydride eUm-ination occurs to form diene 43 in competition with attack of acetate on the intermediate jr-allyl-Pd" species to form the 1,4-addition product 44. 

The latter transformation requires the use of a small amount of an acid or its ammonium salt. By using [Cp2TiMe2] as the catalyst, primary anilines as well as steri-cally hindered tert-alkyl- and sec-alkylamines can be reacted.596 Hydroamination with sterically less hindered amines are very slow. This was explained by a mechanism in which equlibrium between the catalytically active [L1L2Ti=NR] imido complex and ist dimer for sterically hindered amines favors a fast reaction. Lantha-nade metallocenes catalyze the regiospecific addition of primary amines to alkenes, dienes, and alkynes.598 The rates, however, are several orders of magnitude lower than those of the corresponding intramolecular additions. 

Intramolecular photoaddition in cis-5,5,6-trimethylhepta-3,6-dien-2-one (284) takes a different course,296 yielding not the oxetane but the two dihydropyrans (285 and 286). This is in contrast to the inter-molecular cycloaddition of a, jS-unsaturated aldehydes to alkenes which affords only oxetanes, and has been accounted for in terms of diradical intermediates (287 and 288) formed from the s-cis conformation (284) of the dienone. The intermolecular equivalent is thought to occur by addition to the s-trans conformation. 

The intramolecular addition of thiols to alkenes provides a novel entry into heterocycles. One example of this is the reaction of hydrogen sulfide with various nonconjugated dienes to form six-membered rings (equation 302).549 550... 

As noted in the introduction, in contrast to attack by nucleophiles, attack of electrophiles on saturated alkene-, polyene- or polyenyl-metal complexes creates special problems in that normally unstable 16-electron, unsaturated species are formed. To be isolated, these species must be stabilized by intramolecular coordination or via intermolecular addition of a ligand. Nevertheless, as illustrated in this chapter, reactions of significant synthetic utility can be developed with attention to these points. It is likely that this area will see considerable development in the future. In addition to refinement of electrophilic reactions of metal-diene complexes, synthetic applications may evolve from the coupling of carbon electrophiles with electron-rich transition metal complexes of alkenes, alkynes and polyenes, as well as allyl- and dienyl-metal complexes. Sequential addition of electrophiles followed by nucleophiles is also viable to rapidly assemble complex structures. 

Next, we considered the activation of 13 towards hydrolysis by K-complexation of a cationic metal unit to the electron-rich diene system. On the basis of the well-known palladium-mediated addition of nucleophiles to alkenamines, it was anticipated that the enol ether function in 13 would add H2O in the presence of Pd(II).21 Interestingly, exposure of 13 to a slight excess of Pd(OAc)2 led to the isolation of 14 (Scheme 8). This material suggested the exploitation of the existing Pd-C linkage for carbon-carbon bond formation with an appropriate A-side chain. In particular, the intramolecular syn insertion of the allylic double bond in the rrans-butenyl substituent in 15b and subsequent syn (3-hydride elimination would give the desired E-alkene 17. This proposal was examined using alkene 15a as a model system, synthesized in a manner similar to 13. Upon exposure to Pd(OAc)2 under the conditions... 

Intramolecular hydroamination of cyclohexa-2,5-dienes has afforded the corresponding bicyclic allylic amines with high selectivity (Scheme 13).80 The reaction does not proceed through a direct hydroamination of one of the diastereotopic alkenes but more likely involves a diastereoselective protonation of a pentadienyl anion, followed by addition of a lithium amide across the double bond of the resulting 1,3-diene and a highly regioselective protonation of the final allylic anion. 

The mechanism does not proceed through a direct hydroamination of one of the diastereotopic alkenes, but involves a series of very selective processes including a deprotonation of (22), diastereoselective protonation of (26), intramolecular addition of lithium amide (27) to the 1,3-diene moiety, and final regioselective protonation of the allyl anion (28), all mediated by a substoichiometric amount of n-BuLi. 

Dienes are cyclized by intramolecular metathesis. In particular, cyclic alkenes 43 and ethylene are formed by the ring-closing metathesis of the a,co-diene 46. This is the reverse reaction of ethenolysis. Alkene metathesis is reversible, and usually an equilibrium mixture of alkenes is formed. However, the metathesis of a,co-dienes 46 generates ethylene as one product, which can be removed easily from reaction mixtures to afford cyclic compounds 43 nearly quantitatively. This is a most useful reaction, because from not only five to eight membered rings, but also macrocycles can be prepared by RCM under high-dilution conditions. However, it should be noted that RCM is an intramolecular reaction and competitive with acyclic diene metathesis polymerization (ADMET), which is intermolecular to form the polymer 47. In addition, the polymer 47 may be formed by ROMP of the cyclic compounds 43. 

---