Diene copolymerization with maleic

The principle of cyclopolymerization has been applied to the synthesis of macrocyclic ether-containing polymers which may simulate the properties of crown ethers. l,2-Bis(ethenyloxy)benzene (a 1,7-diene) and l,2-bis(2-ethenyloxyethoxy)benzene (a 1,13-diene) are typical of the monomers synthesized. Homopolymerization of the 1,7-diene via radical and cationic initiation led to cyclopolymers of different ring sizes homopolymerization of the 1,13-diene led to cyclic polymer only via cationic initiation. Both monomer types were copolymerized with maleic anhydride to yield predominantly alternating copolymers having macro-cyclic ether-containing rings in the polymer backbone. 

The copolymerization of furan and 2-methylfuran with dienophiles such as maleic anhydride leads to polymer structures with furan pendent functionality. Furan, 2-methylfuran, and 2,5-dimethylfuran have been copolymerized with acrylic monomers (51,52) and acrylonitrile (52,53). The furan ring of furan, 2-methylfuran, and 2,5-dimethylfuran participates as a diene in a free radical copolymerization with acrylonitrile. The initial step for furan and for 2,5-dimethylfuran is the attachment of an acrylonitrile radical at the 2-position, but for 2-methylfuran, the attack is at the-5-position. Propagation proceeds by the attack of the furan radical on an acrylonitrile molecule, to leave one olefinic bond in the structure derived from the furan ring. If this bond is in the 4,5- or 2,3-position, it may be involved in a second additional reaction by the return of the propagating chain. 

Quirk [531] reports on the copolymerization of myrcene and styrene. Block copolymers with molecular weight of more than 100 000 are obtained. Many combinations of substituted 1,3-butadienes and cyclodienes with other dienes, olefins, and styrene have been described [532-542]. Cyclopentadiene or 1,3-cyclohexadiene can be copolymerized with a-methylstyrene [543-545], isobutene [546,547], 1,3-butadiene [548,549], acrylonitrile [550,551], SCI2 [552], SO2 [553], and compounds of maleic acid [554-557]. 

Copolymerization of 1,4-dienes with maleic anhydride or other olefins (12,24). 

In addition, borane-containing POs can be prepared by copolymerization of olefin with borane monomers or by hydroboration of polyolefins including unsaturated groups, such as olefin-divinylbenzene copolymer and olefin-diene copolymers. Many kinds of graft copolymers, such as poly-elhylene-gra/f-poly( vinyl alcohol), PE-g-PMMA, polypropylcnc-gra/f-poly-(maleicanhydride-co-styrene), polypropylene-gra/f-poly(methacrylic acid), polypropylene-gra/f-poly(vinyl alcohol), polypropylene-gra/f-polycaprolac-tone (PP-g-PCL), polypropylcnc-gra/f-poly(methyl methacrylate) (PP-g-PMMA), poly( ethylene-co-propylene)-gra/f-poly(methyl methacrylate) (EPR-g-PMMA), and poly(ethylene-co-propylene)-gra/f-poly(maleic anhydride-costyrene), have been synthesized by such a method resulting in controllable composition and molecular microstructures [63-66]. 

Similarly, whereas the Diels-Alder reaction is accelerated at elevated temperatures, under polymerization conditions, the reaction of isoprene and maleic anhydride is extremely exothermic, and the relative amounts of adduct and copolymer are temperature dependent. It has been reported (81) that the rate of copolymerization is very fast compared with the rate of homopolymerization of the diene or the dienophile, and the energy of activation is approximately 5 kcal./mole. Although the rate of copolymerization increases at elevated temperatures, the simultaneous adduct formation which also occurs more readily at elevated temperatures limits the maximum rate to lower temperatures. 

The radical-catalyzed copolymerization of isoprene and maleic anhydride in the presence of polystyrene gives the corresponding alternating copolymer graft copolymer (Table IX). Similar results are obtained with other dienes and appropriate substrate polymers. 

Maleic anhydride grafting (cont.) poly(styrene-co-divinylbenzene), 694 poly(styrene-co-isobutylene), 675, 689 poly(styrene-co-nfialeic anhydride), 676, 679 poly(vinyl acetate), 676, 694 poly(vinyl acetate-co-vinyl fluoride), 678 poly(vinyl alkyl ethers), 675, 679, 692, 701 poly(vinyl chloride), 683, 692, 693, 695, 702 poly(vinylidene chloride), 691 poly(vinyl toluene-co-butadiene), 689 radical—initiated, 459-462, 464-466, 471, 475, 476 radiation—initiated, 459, 461, 466, 471, 474 redox-initiated, 476 rubber, 678, 686, 687, 691, 694 to saturated polymers, 459-466, 475, 476 solvents used 460-463, 465, 466, 469, 474-476 styrene block copolymers, 679 tall oil pitch, 678, 697 terpene polymers, 679, 700 thermally-initiated, 462, 464-467, 469, 476 to unsaturated polymers, 459, 466-474 vapor-phase techniques, 464, 474, 475 to wool fibers, 476 Maleic anhydride monomer acceptor for complex formation, 207-210 acetal copolymerization, 316 acetone CTC thermodynamic constants, 211 acetone photo-adduct pyrolysis, 195, 196 acetylacetone reaction, 235 acetylenic photochemical reactions, 193-196 acrylamide eutectic mixtures, 285 acylation of aromatic acids, 97 acylation of aromatics, 91, 92 acylation of fused aromatics, 92, 95, 97, 98 acylation of olefins, 99 acylation of phenols, 94-96 acylic diene Diels-Alder reactions, 104-111, 139 addition polymer condensations, 503-505 adduct with 2-cyclohexylimino-cyclopentanedi-thiocarboxylic acid, 51 adducts for epoxy resins curing, 507-510 adduct with 2-iminocyclopentanedithiocarboxylic acid, 51... 

A recent patent describes the copolymerization of 1,4-pentadienes of various types with other monomers. Radical initiators were used and soluble polymers obtained 24). Although the structures of the products were not explicitly described, they could have possessed four-membered rings analogous to those in [18]. In addition to perfluoro-1,4-pentadiene, the other dienes mentioned were 1,4-pentadiene, 2,4-dichloro-l,4-pentadiene, 1,1-dichloro-1,4-pentadiene, and 3,3-dimethyl-1,4-pentadiene. Co-monomers included maleic anhydride and haloethylenes such as trichloroethylene. However, these copolymerizations could also have taken the path shown in Eq. (11-22). 

---