DI-2-ETHYLHEXYL

Fig. n-21. Surface tension as a function of age for 0.05 g/100 cm of sodium di(2-ethylhexyl)sulfosuccinate solution determined with various types of jet orifices [109]. 

EHTTTALIC acid and OTTiERBENZENEPOLYCARBOXYLIC ACIDS] (Vol 18) Di(2-ethylhexyl) peroxydicarbonate [16111-62-9]... 

Aldehydes fiad the most widespread use as chemical iatermediates. The production of acetaldehyde, propionaldehyde, and butyraldehyde as precursors of the corresponding alcohols and acids are examples. The aldehydes of low molecular weight are also condensed in an aldol reaction to form derivatives which are important intermediates for the plasticizer industry (see Plasticizers). As mentioned earlier, 2-ethylhexanol, produced from butyraldehyde, is used in the manufacture of di(2-ethylhexyl) phthalate [117-87-7]. Aldehydes are also used as intermediates for the manufacture of solvents (alcohols and ethers), resins, and dyes. Isobutyraldehyde is used as an intermediate for production of primary solvents and mbber antioxidants (see Antioxidaisits). Fatty aldehydes Cg—used in nearly all perfume types and aromas (see Perfumes). Polymers and copolymers of aldehydes exist and are of commercial significance. 

In the calendering method, a PVC compound which contains plasticizers (qv) (60—120 phr), pigments (qv) (0—10 phr), fillers (qv) (20—60 phr), stabilizers (10—30 phr), and other additives, is kneaded with calender roUs at 150—200°C, followed by extmsion between clearance-adjusted roUs for bonding onto the substrate. This method is employed for products with thick PVC layers, ie, of 0.05—0.75 mm thickness. The main plasticizer used is di-2-ethylhexyl phthalate (DOP). For filler to reduce cost, calcium carbonate is mainly used. A woven or knit fabric made of cotton, rayon, nylon, polyester, and their blend fiber is used as substrate. For foamed vinyl-coated fabrics, the bonded materials are heated in an oven to decompose the foam-blowing... 

Diesters have been produced primarily by esterification of a C -branched-chain alcohol with adipic (C ), a2elaic (C ), or sebacic (C q) diacid. Di(2-ethylhexyl)sebacate [122-62-3] was quite generally used in military greases and MIL-L-7808 jet engine oil, but more recent demands and price competition have led to use of a variety of diesters. 

Solvent Extraction. Liquid—hquid extractioa, well known ia the chemical iadustry, was first used ia extractive metallurgy for the processiag of uranium. When a dilute solution of uranium is contacted with an extractant such as di(2-ethylhexyl) phosphoric acid (D2EHPA) or R2HPO4, dissolved ia... 

The O or S atoms in P=0 and P=S groups may act as electron donors although these groups form relatively weak complexes with electron acceptor compounds such as nonpolarizable, more electropositive (ie, hard) acids, including protons (14). Use is made of this property in the recovery of uranium from wet-process phosphoric acid by extractants such as trioctylphosphine oxide [78-50-2] and di(2-ethylhexyl) hydrogen phosphate [298-07-7]. 

Uses. Phthabc anhydride is used mainly in plasticizers, unsaturated polyesters, and alkyd resins (qv). PhthaUc plasticizers consume 54% of the phthahc anhydride in the United States (33). The plasticizers (qv) are used mainly with poly(vinyl chloride) to produce flexible sheet such as wallpaper and upholstery fabric from normally rigid polymers. The plasticizers are of two types diesters of the same monohydric alcohol such as dibutyl phthalate, or mixed esters of two monohydric alcohols. The largest-volume plasticizer is di(2-ethylhexyl) phthalate [117-81-7] which is known commercially as dioctyl phthalate (DOP) and is the base to which other plasticizers are compared. The important phthahc acid esters and thek physical properties are Hsted in Table 12. The demand for phthahc acid in plasticizers is naturally tied to the growth of the flexible poly(vinyl chloride) market which is large and has been growing steadily. 

Di-2-EthylhexylPhthalate. In Western Europe, di-2-ethylhexyl phthalate [117-81-7] (DEHP), also known as dioctyl phthalate (DOP), accounts for about 50% of all plasticizer usage and as such is generally considered as the industry standard. The reason for this is that it is in the mid-range of plasticizer properties. DEHP (or DOP) is the phthalate ester of 2-ethyIhexanol, which is normally manufactured by the dimerization of butyraldehyde (eq. 2), the butyraldehyde itself being synthesized from propylene (see Butyraldehydes). 

Numerous toxicological studies have been conducted on a variety of plasticizers. However, because di-(2-ethylhexyl) phthalate (DEHP) is the most widely used plasticizer and is a well-defined single substance, it is the plasticizer that has been most thoroughly investigated in terms of its toxicology and has often been considered as a model for the other phthalates (36). 

Many organic reagents have been used successfully in Pu separation processes. The reagents include tri- -butyl phosphate (TBP) methyl isobutyl ketone thenoyl ttifluoroacetone (TTA) ethers, eg, diethyl ether, di- -butyl ether, tetraethylene glycol dibutyl ether trdaurylamine (TT,A) trioctylamine (TOA) di- -butyl phosphate (DBP) hexyl-di(2-ethylhexyl) phosphate (HDEHP) and many others. Of these, TBP is by far the most widely used (30,95). 

---