Destructive equipment

The most commonly used types of final vapor/gas control or destruction equipment are... 

Equipment Selection Criteria and Guidelines A number of factors should be considered to determine when to select which type ofvapor/gas/solid-liquid separator (blowdown drum or cyclone separator) to handle a multiphase stream from a relief device, and which final control or destruction equipment (emergency flare, emergency scrubber, or quench pool/catch tank) should be selected. These factors include the plot plan space available, the operating limitations of each type, and the physicochemical properties of the stream. 

The selection of vapor/gas/solid-liquid separators and final control and destruction equipment can be helped by considering the advantages and disadvantages of each, as given below. 

Mine detectors, EOD probes, safety equipment, R D and destruction equipment. 

The thermal destruction of hazardous wastes involves the controlled exposure of waste to high temperatures (usually 900°C or greater) in an oxidizing environment. Types of thermal destruction equipment include high-temperature boilers, cement kilns, and industrial furnaces in which hazardous waste is burned as fuel. In a properly designed system, primary fuel (100% combustible material) is mixed with waste to produce a feed for the boiler. 

Environmental Protection Plan The EPP described the approaches, equipment and procedures to be used by Western Research Partnership in eliminating or mitigating any environmental and health risks with respect to the installation and operation of the agent waste destruction equipment. The following specific topics were addressed ... 

Potential health/safety risks and environmental impacts on EPG sites from operation of the agent destruction equipment were identified. In general, incinerator emissions and their impact on air quality were identified as posing the greatest risks ... 

Ozone generation from air, with air preparation equipment, ozone generator, dissolution equipment, off-gas recycling or destruction equipment, safety and monitoring equipment. FOB cost = 545 000 at ozone production rate of 0.46 g/s with n = 0.67 for the range 0.09-30. Factors air feed, X 1.00 oxygen feed, X 0.5. L-rM = 1.2-1.35. 

Even if the destruction process is not limited by the walls of the destruction facility, it is suitable for the purpose of this paper, to consider it as a closed plant and to concentrate on the proper destruction equipment and its close... 

Dry film gauging Electrical and magnetic nondestructive and visual destructive equipment for determining thickness are described in several places (Figs. 14.26 and 14.27). 

---