Chemical dehydrogenation

Under the above conditions, the d4 compound is formed in 71 percent yield. The other major product is the monoprotio analog of 36 (22%). Careful characterization of the products showed no D on the outer aromatic rings. Although such a conversion has not been reported, if 36-di were to be dehydrogenated chemically, with a reagent such as sulfur or chloranil, it would be possible to obtain 35-dz. 

Characteristics of the MetaUic Phase of Pt/ AI2O3 and Na-Dop>ed Pt/ AI2O3 Catalysts for Light Paraffins Dehydrogenation. Chemical Engineering Journal, V0I.II8, No.3, (May 2006), pp. 161-166, ISSN 1385-8947... 

Zhang, M., Zhou, J., Kan, J., Wang, M., Su, W., Hong, M. (2010). Pd-catalyzed cross-coupling of carboxyUc acids with nitroethane via combination of decarboxylation and dehydrogenation. Chemical Comrrumications, 46, 5455—5457. 

Gimeno, M.P., Wu, Z.T., Solei J., Herguido, J., Li, K. and Menendez, M. (2009) Combination of a two-zone fluidized bed reactor with a Pd hollow fibre membrane for catalytic alkane dehydrogenation. Chemical Engineering Journal, 155, 298-303. 

Dehydrogenation—chemical reaction that involves the elimination of hydrogen (H2). 

It has been shown that catechol can be dehydrogenated chemically to o-benzoquinone and the latter can be converted to cis, m-muconic acid in the presence of HjOj or other peroxides. It was therefore tempting to speculate that in the enzymic phenolytic cleavage o-benzoquinone is formed as a primary product, which is cleaved peroxidatively as shown in Eqs. (18) and (19). 

Benzene was first isolated by Faraday in 1825 from the liquid condensed by compressing oil gas. It is the lightest fraction obtained from the distillation of the coal-tar hydrocarbons, but most benzene is now manufactured from suitable petroleum fractions by dehydrogenation (54%) and dealkylation processes. Its principal industrial use is as a starting point for other chemicals, particularly ethylbenzene, cumene, cyclohexane, styrene (45%), phenol (20%), and Nylon (17%) precursors. U.S. production 1979 2-6 B gals. 

Reverse osmosis is used for desalination of seawater, treatment of recycle water in chemical plants and separation of industrial wastes. More recently the technique has been applied to concentration and dehydrogenation of food products such as milk and fruit juices. See ultrafiltralion. 

Besides stmctural variety, chemical diversity has also increased. Pure silicon fonns of zeolite ZSM-5 and ZSM-11, designated silicalite-l [19] and silicahte-2 [20], have been synthesised. A number of other pure silicon analogues of zeolites, called porosils, are known [21]. Various chemical elements other than silicon or aluminium have been incoriDorated into zeolite lattice stmctures [22, 23]. Most important among those from an applications point of view are the incoriDoration of titanium, cobalt, and iron for oxidation catalysts, boron for acid strength variation, and gallium for dehydrogenation/aromatization reactions. In some cases it remains questionable, however, whether incoriDoration into the zeolite lattice stmcture has really occurred. 

Natural gas Hquids represent a significant source of feedstocks for the production of important chemical building blocks that form the basis for many commercial and iadustrial products. Ethyleae (qv) is produced by steam-crackiag the ethane and propane fractions obtained from natural gas, and the butane fraction can be catalyticaHy dehydrogenated to yield 1,3-butadiene, a compound used ia the preparatioa of many polymers (see Butadiene). The / -butane fractioa can also be used as a feedstock ia the manufacture of MTBE. 

Production of maleic anhydride by oxidation of / -butane represents one of butane s largest markets. Butane and LPG are also used as feedstocks for ethylene production by thermal cracking. A relatively new use for butane of growing importance is isomerization to isobutane, followed by dehydrogenation to isobutylene for use in MTBE synthesis. Smaller chemical uses include production of acetic acid and by-products. Methyl ethyl ketone (MEK) is the principal by-product, though small amounts of formic, propionic, and butyric acid are also produced. / -Butane is also used as a solvent in Hquid—Hquid extraction of heavy oils in a deasphalting process. 

About 35% of total U.S. LPG consumption is as chemical feedstock for petrochemicals and polymer iatermediates. The manufacture of polyethylene, polypropylene, and poly(vinyl chloride) requires huge volumes of ethylene (qv) and propylene which, ia the United States, are produced by thermal cracking/dehydrogenation of propane, butane, and ethane (see Olefin polymers Vinyl polymers). 

Methanol undergoes reactions that are typical of alcohols as a chemical class (3). Dehydrogenation and oxidative dehydrogenation to formaldehyde over silver or molybdenum oxide catalysts are of particular industrial importance. 

Worldwide propylene production and capacity utilization for 1992 are given in Table 6 (74). The world capacity to produce propylene reached 41.5 X 10 t in 1992 the demand for propylene amounted to 32.3 x 10 t. About 80% of propylene produced worldwide was derived from steam crackers the balance came from refinery operations and propylene dehydrogenation. The manufacture of polypropylene, a thermoplastic resin, accounted for about 45% of the total demand. Demand for other uses included manufacture of acrylonitrile (qv), oxochemicals, propylene oxide (qv), cumene (qv), isopropyl alcohol (see Propyl alcohols), and polygas chemicals. Each of these markets accounted for about 5—15% of the propylene demand in 1992 (Table 7). 

Production of a-methylstyrene (AMS) from cumene by dehydrogenation was practiced commercially by Dow until 1977. It is now produced as a by-product in the production of phenol and acetone from cumene. Cumene is manufactured by alkylation of benzene with propylene. In the phenol—acetone process, cumene is oxidized in the Hquid phase thermally to cumene hydroperoxide. The hydroperoxide is spHt into phenol and acetone by a cleavage reaction catalyzed by sulfur dioxide. Up to 2% of the cumene is converted to a-methylstyrene. Phenol and acetone are large-volume chemicals and the supply of the by-product a-methylstyrene is weU in excess of its demand. Producers are forced to hydrogenate it back to cumene for recycle to the phenol—acetone plant. Estimated plant capacities of the U.S. producers of a-methylstyrene are Hsted in Table 13 (80). 

Most synthetic camphor (43) is produced from camphene (13) made from a-piuene. The conversion to isobomyl acetate followed by saponification produces isobomeol (42) ia good yield. Although chemical oxidations of isobomeol with sulfuric/nitric acid mixtures, chromic acid, and others have been developed, catalytic dehydrogenation methods are more suitable on an iadustrial scale. A copper chromite catalyst is usually used to dehydrogenate isobomeol to camphor (171). Dehydrogenation has also been performed over catalysts such as ziac, iadium, gallium, and thallium (172). 

Vinyltoluene. Viayltoluene is produced by Dow Chemical Company and is used as a resia modifier ia unsaturated polyester resias. Its manufacture is similar to that of styrene toluene is alkylated with ethylene, and the resulting ethyltoluene is dehydrogenated to yield vinyltoluene. Annual production is ia the range of 18,000—23,000 t/yr requiring 20,000—25,000 t (6-7.5 x 10 gal) of toluene. 

Benzene is alkylated with ethylene to produce ethylbenzene, which is then dehydrogenated to styrene, the most important chemical iatermediate derived from benzene. Styrene is a raw material for the production of polystyrene and styrene copolymers such as ABS and SAN. Ethylbenzene accounted for nearly 52% of benzene consumption ia 1988. 

The mechanistic steps are as follows paraffins dehydrogenate to olefins the olefins oligomerize and cyclize and the cycHcs aromatize. Because the first step is rate controlling, very Httie olefin is actually present. The BTX product is relatively free of nonaromatics and therefore is very desirable as a chemical feed. As in reforming, some C —C2 fuel gas is produced along with a valuable hydrogen stream. Prom a C —feed the BTX product is roughly 35 45 20, respectively. 

---