DCC

Small molecules in low viscosity solutions have, typically, rotational correlation times of a few tens of picoseconds, which means that the extreme narrowing conditions usually prevail. As a consequence, the interpretation of certain relaxation parameters, such as carbon-13 and NOE for proton-bearing carbons, is very simple. Basically, tlie DCC for a directly bonded CH pair can be assumed to be known and the experiments yield a value of the correlation time, t. One interesting application of the measurement of is to follow its variation with the site in the molecule (motional anisotropy), with temperature (the correlation... 

The widely used Moifatt-Pfltzner oxidation works with in situ formed adducts of dimethyl sulfoxide with dehydrating agents, e.g. DCC, AcjO, SO], P4O10, CCXTl] (K.E, Pfitzner, 1965 A.H. Fenselau, 1966 K.T. Joseph, 1967 J.G. Moffatt, 1971 D. Martin, 1971) or oxalyl dichloride (Swem oxidation M. Nakatsuka, 1990). A classical procedure is the Oppenauer oxidation with ketones and aluminum alkoxide catalysts (C. Djerassi, 1951 H. Lehmann, 1975). All of these reagents also oxidize secondary alcohols to ketones but do not attack C = C double bonds or activated C —H bonds. 

In peptide syntheses, where partial racemization of the chiral a-carbon centers is a serious problem, the application of 1-hydroxy-1 H-benzotriazole ( HBT") and DCC has been very successful in increasing yields and decreasing racemization (W. Kdnig, 1970 G.C. Windridge, 1971 H.R. Bosshard, 1973), l-(Acyloxy)-lif-benzotriazoles or l-acyl-17f-benzo-triazole 3-oxides are formed as reactive intermediates. If carboxylic or phosphoric esters are to be formed from the acids and alcohols using DCC, 4-(pyrrolidin-l -yl)pyridine ( PPY A. Hassner, 1978 K.M. Patel, 1979) and HBT are efficient catalysts even with tert-alkyl, choles-teryl, aryl, and other unreactive alcohols as well as with highly bulky or labile acids. 

A widely used protecting agent is 2-cyanoethanol (- 3-hydroxypropanonitrile, hy-dracrylonitrile), which is condensed with phosphates with the aid of DCC. The 2-cyanoethyl (Ce) group is quantitatively removed as acrylonitrile by treatment with weak bases (H.G. Kho-rana, 1965). 

A major problem in the development of phosphotriester syntheses has been the lack of appropriate condensing agents. DCC cannot be used, because it will not activate phosphodi-... 

With the dicyclohexylcarbodiimide (DCQ reagent racemization is more pronounced in polar solvents such as DMF than in CHjCl2, for example. An efficient method for reduction of racemization in coupling with DCC is to use additives such as N-hydroxysuccinimide or l-hydroxybenzotriazole. A possible explanation for this effect of nucleophilic additives is that they compete with the amino component for the acyl group to form active esters, which in turn reaa without racemization. There are some other condensation agents (e.g. 2-ethyl-7-hydroxybenz[d]isoxazolium and l-ethoxycarbonyl-2-ethoxy-l,2-dihydroquinoline) that have been found not to lead to significant racemization. They have, however, not been widely tested in peptide synthesis. 

Then N-Boc-O-benzylserine is coupled to the free amino group with DCC. This concludes one cycle (N° -deprotection, neutralization, coupling) in solid-phase synthesis. All three steps can be driven to very high total yields (< 99.5%) since excesses of Boc-amino acids and DCC (about fourfold) in CHjClj can be used and since side-reactions which lead to soluble products do not lower the yield of condensation product. One side-reaction in DCC-promoted condensations leads to N-acylated ureas. These products will remain in solution and not reaa with the polymer-bound amine. At the end of the reaction time, the polymer is filtered off and washed. The times consumed for 99% completion of condensation vary from 5 min for small amino acids to several hours for a bulky amino acid, e.g. Boc-Ile, with other bulky amino acids on a resin. A new cycle can begin without any workup problems (R.B. Merrifield, 1969 B.W. Erickson, 1976 M. Bodanszky, 1976). 

The synthesis described met some difficulties. D-Valyl-L-prolyl resin was found to undergo intramolecular aminoiysis during the coupling step with DCC. 70< o of the dipeptide was cleaved from the polymer, and the diketopiperazine of D-valyl-L-proline was excreted into solution. The reaction was catalyzed by small amounts of acetic acid and inhibited by a higher concentration (protonation of amine). This side-reaction can be suppressed by adding the DCC prior to the carboxyl component. In this way, the carboxyl component is "consumed immediately to form the DCC adduct and cannot catalyze the cyclization. 

Macrocyclic peptides and depsipeptides ( macrocyciic peptides with amide and ester linkages) are important natural compounds. They have been synthesized in low yield from open-chain precursors by DCC treatment at high dilution (E. SchrSder, 1963 M.M. Shemyakin,... 

First the protected oligopeptide is coupled with polymer-bound nitrophenol by DCC. N"-Deblocking leads then to simultaneous cycliiation and detachment of the product from the polymer (M. Fridkin, 1965). Recent work indicates that high dilution in liquid-phase cycli-zation is only necessary, if the cyclization reaction is sterically hindered. Working at low temperatures and moderate dilution with moderately activated acid derivatives is the method of choice for the formation of macrocyclic lactams (R.F. Nutt, 1980). 

This reaction sequence is much less prone to difficulties with isomerizations since the pyridine-like carbons of dipyrromethenes do not add protons. Yields are often low, however, since the intermediates do not survive the high temperatures. The more reactive, faster but less reliable system is certainly provided by the dipyrromethanes, in which the reactivity of the pyrrole units is comparable to activated benzene derivatives such as phenol or aniline. The situation is comparable with that found in peptide synthesis where the slow azide method gives cleaner products than the fast DCC-promoted condensations (see p. 234). 

The principal producers of lead chromate pigments ia North America are Cookson, DCC (owned by Kikuchi), Engelhard, and Wayne Pigment. In Europe, lead chromates are produced by Ciba ia Holland, CapeUe ia Erance, and Heubach GmGH ia Germany. 

AijAT-dicyclohexylcarhodiimide (DCC) also leads to essentially quantitative conversion of amic acids to isoimides, rather than imides (30,31). Combinations of trifluoroacetic anhydride—triethjlarnine and ethyl chi oroform a te—triethyl amine also result in high yields of isoimides (30). A kinetic study on model compounds has revealed that isoimides and imides are formed via a mixed anhydride intermediate (12) that is formed by the acylation of the carboxylic group of amic acid (8). 

CSMA. Designation DCC-04, Chemical Specialties Manufacturers Association, Washington, D.C., July 1973. 

Deposition on Glassware During Mechanical Dishwashing CSMA Designation DCC-05A, Dec. 1981. 

---