Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cycloadditions ruthenium-catalyzed

Within this chapter, two sections are devoted to rhodium and ruthenium. The two main procedures using rhodium are first, the formation of 1,3-dipoles from diazocompounds followed by a 1,3-dipolar cycloaddition [10] and second, hy-droformylation [11], The ruthenium-catalyzed domino reactions are mostly based on metathesis [12], with the overwhelming use of Grubbs I and Grubbs 11 catalysts. [Pg.359]

Disubstituted 1,2,3-triazoles are formed in 1,3-dipolar cycloaddition of alkynylmagnesium reagents to azides. This reverse regioselectivity is also achieved in ruthenium-catalyzed cycloadditions. Examples of such reactions can be found in Section 5.01.9. [Pg.138]

Itoh and co-workers reported the ruthenium(n)-catalyzed [2 + 2 + 2]-cycloaddition of 1,6-diynes with isocyanates to afford the corresponding bicyclic pyridones 163 (Scheme 72).356 357 For previously reported ruthenium-catalyzed [2 + 2 + 2]-cycloaddition of 1,6-diynes see Refs 358 and 358a, and for theoretical calculations of the cyclocotrimer-ization of alkynes with isocyanates, isothiocyanates, and carbon disulfide see Refs 359 and 359a. [Pg.442]

An allenylaldehyde can be transformed efficiently into an a-methylene-y-butyro-lactone by a ruthenium-catalyzed carbonylative cycloaddition process (Scheme 16.34) [37]. The reaction mechanism may involve a metallacyclopentene, which undergoes insertion of CO and reductive elimination leading to the product. [Pg.938]

Itoh and coworkers111 carried out tandem [2 + 2 + 2]/[4 + 2] cycloadditions catalyzed by a ruthenium catalyst. The reaction of diyne 147 with excess norbomene 148 in the presence of ruthenium catalyst 153, for example, afforded 149. Adduct 150 either dissociated from the catalyst or reacted with another equivalent of norbornene. In the latter case, a ruthenium catalyzed Diels-Alder reaction occurred, affording hexacyclic adduct 152 via 151 (equation 43). Compounds 150 and 152 were obtained in yields of 78% and 10%, respectively. Both cycloaddition reactions proceeded with complete stereoselectivity. When 1,6-heptadiyne was used instead of 147, only trace amounts of a cycloadduct were obtained. Replacing norbornene by norbornadiene, which was expected to result in polymer formation, did not afford any adduct at all. [Pg.364]

Ruthenium-Catalyzed Cycloaddition Reaction between Enyne and Alkene... [Pg.209]

Allenyl aldehydes undergo a ruthenium-catalyzed cycloaddition reaction with CO to afford reduced furopyridines in good yields (Equation 17) <2002AGE1584>. In a similar reaction, the furopyran derivative is formed. [Pg.290]

Much less information is available about [2 + 2]-cycloadditions. These allow the formation of cyclobutane derivatives in the reaction between two alkenes, or that of cyclobutenes from alkenes and alkynes. The reaction can be achieved thermally via biradical intermediates,543 by photoreaction,544 and there are also examples for transition-metal-catalyzed transformations. An excellent example is a ruthenium-catalyzed reaction between norbomenes and alkynes to form cyclobutenes with exo structure ... [Pg.335]

A palladium-catalyzed intramolecular benzannulation of bis-enynes 1135 proceeds chemoselectively to afford dihydroisocoumarins 1136 (Equation 441) <2002JOC2653>. A reaction sequence involving ruthenium-catalyzed yne-ene cross-metathesis of a polystyrene supported undecynoic acid ester followed by a Diels-Alder cycloaddition reaction with DMAD provides the basis for a combinatorial approach to dihydroisocoumarins featuring a variety of side chains at C-6 and C-8 <1999SL1879>. [Pg.660]

One of the first examples of ruthenium-catalyzed C-C bond formation afforded the synthesis of cyclobutenes, from norbornene derivatives with dimethyl acetylenedicarboxylate, and was reported by Mitsudo and coworkers [45, 46] by using various catalysts such as RuH2(CO)[P(p-C6H4F)3]3 or RuH2(PPh3)4. More recently, the complex Cp RuCl(COD) has shown to be an excellent catalyst for the [2+2] cycloaddition of norbornenes with various internal alkynes [45] (Eq. 33) and with a variety of substituted norbornenes and norbornadienes [47]. The ruthenacycle intermediate, formed by oxidative coupling, cannot undergo /1-hydride elimination and leads to cyclobutene via a reductive elimination. [Pg.16]

Recently, cyclopropane derivatives were produced by a ruthenium-catalyzed cyclopropanation of alkenes using propargylic carboxylates as precursors of vinylcarbenoids [51] (Eq. 38). The key intermediate of this reaction is a vinylcarbene complex generated by nucleophilic attack of the carboxylate to an internal carbon of alkyne activated by the ruthenium complex. Then, a [2+1] cycloaddition between alkenes and carbenoid species affords vinylcyclo-propanes. [Pg.17]

Recently, a formal ruthenium-catalyzed [4+2+2] cycloaddition of 1,6-diynesto 1,3-dienes gave conjugated 1,3,5-cyclooctatrienes and vinylcyclohexadienes [94] (Eq. 73). Insertion of a double bond in the ruthenacyclopentadiene can lead to the formation of tetraenes or vinyltrienes which undergo a thermal elec-trocyclization. [Pg.30]

The ruthenium-catalyzed [2+2+2] cycloaddition of 1,6-diynes was performed with an electron-deficient carbonyl double bond, activated with two electron-withdrawing groups, to produce conjugated dienones via electrocyclic ring opening of the expected cycloadduct [101] (Eq. 77). [Pg.32]

Abstract Ruthenium-catalyzed carbonylation reactions are described. The purpose of this chapter is to show how ruthenium complexes as catalysts are important in the recent development of carbonylation reactions. This review does not present a complete, historical coverage of ruthenium-catalyzed carbonylation reactions,but presents the most significant developments of the last 10 years. The emphasis is on novel and synthetic transformations of genuine value to organic chemists. Especially, this review will focus on carbonylative cycloadditions and carbonylation of C-H bonds. The review is generally organized according to the nature of the reaction. [Pg.173]

Pericyclic reactions involving thiophenes have been utilized to prepare a variety of complex heterocycles. The intramolecular Diels-Alder reaction of 2-vinylbenzo[i]thiophene 92 produced a pair of tetracyclic adducts 93 and 94 <02TL3963>. Coupling of Fischer carbene 96 with 3-alkynylthiophene 95 led to the formation of thieno[2,3-c]pyran-3-one 97 in one step <02JOC4177>. An intramolecular cycloaddition of 97 then afforded tetracyclic adduct 98. A ruthenium-catalyzed cyclodimerization reaction involving bis-thienyl acetylene derivatives was... [Pg.125]

Abstract This review gives an insight into the growing field of transition metal-catalyzed cascades. More particularly, we have focused on the construction of complex molecules from acyclic precursors. Several approaches have been devised. We have not covered palladium-mediated cyclizations, multiple Heck reactions, or ruthenium-catalyzed metathesis reactions because they are discussed in others chapters of this book. This manuscript is composed of two main parts. In the first part, we emphasize cascade sequences involving cycloaddition, cycloisomerization, or ene-type reactions. Most of these reaction sequences involve a transition metal-catalyzed step that is either followed by another reaction promoted by the same catalyst or by a purely thermal reaction. A simple change in the temperature of the reaction mixture is often the only technical requirement to go from one step to another. The second part covers the cascades relying on transition metalo carbenoid intermediates, which have recently undergone tremendous... [Pg.259]

An intramolecular rhodium-catalyzed [2+2+2] cycloaddition of diynenitriles <07OL1295> diyne esters <07T12853> and alkynevinyl oximes <07TL6852> also afforded pyridine versions of dihydrobenzo[c]furans. Trost prepared these pyridine derivatives employing a similar ruthenium-catalyzed cycloisomerization-6 cyclization route as depicted in the following scheme <07OL1473>. [Pg.180]

Ruthenium catalysts were used as alternatives to the usual copper catalysts. Ynamides 102 reacted with various azides 103 in the ruthenium-catalyzed Huisgen [3+2] cycloaddition reaction to yield l-protected-5-amido 1,2,3-triazoles 104 <07T8094>. The formation of 1,5-... [Pg.203]

Triazole derivatives could be synthesized from different starting substrates. Various triazoles 155 were synthesized from nonactivated terminal alkynes 152, allyl methyl carbonate 153 and trimethylsilyl azide 154 in a [3 + 2] cycloaddition with the use of the Pd(0)-Cu(I) bimetallic catalyst <03JA7786>. The allyl group of 155 was efficiently deprotected by ruthenium-catalyzed isomerization followed by ozonolysis to give 4-substituted triazoles 156. a-Aminoacetophenones 157 were reacted with hydrazines in acetic acid to give an efficient... [Pg.215]

The cobalt-mediated cycloaddition of an alkyne, an alkene, and CO leading to a cyclopentenone has been known as the Pauson-Khand (PK) reaction [78], Due to its synthetic importance, numerous variants - especially catalytic reactions - have been developed to date [79]. The first ruthenium-catalyzed PK reaction of enynes has been achieved using Ru3(CO)i2 by two research groups independently (Scheme... [Pg.115]

CEJ4035>. Diastereospecific synthesis of r-/3-lactams can be effected via cycloaddition reaction of bisimines and the ketene derived from 582 (R = CH2CO2H) (Staudinger reaction) <2000T8555>. Ruthenium-catalyzed [2-1-2] cycloaddition of norbornene and ynamide 582 (R = C=CPh) <2006T3823> was reported. [Pg.615]

Other metal-mediated reactions of azide reagents to terminal alkynes have also been reported. Indium(ll) triflate catalyzed tandem azidation/l,3-dipolar cycloaddition of various (o,(o-dialkoxyalkynes 134 with trimethylsilyl azide yielded fused 1,2,3-triazoles 135 <05TL8639>. A new ruthenium-catalyzed process for the regioselective synthesis of 1,5-disubstituted-1,2,3-triazoles has been developed <05JA15998>. [Pg.233]

Yamamoto et al. reported that the ruthenium-catalyzed cycloaddition of the 1,6-diyne 404 with the... [Pg.39]

Yamamoto et al. reported the ruthenium-catalyzed hetero-[2 + 2 + 2]-cycloaddition of the 1,6-diynes 413 with the tricarbonyl compound 414 (Scheme 131).191 The cycloadducts 415 were transformed in situ to the cyclic dienones 416 via electrocyclic ring opening. [Pg.40]

Trost et al. reported the ruthenium-catalyzed het-ero-[4 + 2]-cycloaddition and hydrative cyclization of yne—enone 439 (Scheme 140).201 In the absence of water the reaction proceeds through the usual [4 + 2]-cycloaddition to give the bicyclic pyran 440, while the hydrative cyclization occurs in the presence of water to afford the cyclic diketone 441. The reaction is... [Pg.42]


See other pages where Cycloadditions ruthenium-catalyzed is mentioned: [Pg.183]    [Pg.614]    [Pg.869]    [Pg.72]    [Pg.195]    [Pg.121]    [Pg.19]    [Pg.174]    [Pg.254]    [Pg.265]    [Pg.179]    [Pg.158]    [Pg.5617]    [Pg.105]    [Pg.117]    [Pg.124]    [Pg.183]    [Pg.154]    [Pg.33]    [Pg.33]   
See also in sourсe #XX -- [ Pg.2 , Pg.2 , Pg.99 ]




SEARCH



Cycloaddition ruthenium-catalyzed

Cycloadditions ruthenium

Ruthenium catalyzed

© 2024 chempedia.info