Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cutting glass workers

The first carbon fiber microelectrode reported in literature was that fabricated by Ponchon and co-workers in 1979[18], This procedure involved pulling a glass tube to obtain a diameter of few micrometers. Then the carbon fiber (outside diameter 8 pm, length 20 to 40 mm) was threaded into the capillary, thus enabling the fiber to be pushed a few mm through the capillary. The authors reported that this method minimized the interstitial space between the capillary and the carbon fiber. Then, the capillary was inverted into a mixture of graphite powder and polyester resin to fill 4-5 mm of the body with the paste. A contact wire was then pushed as far as possible into the barrel filled with the paste. Immediately before use, the electrodes were cut to a length of 0.5 mm[18]. [Pg.323]

The actor s consciousness should be increased in the enterprises production, considering this behavior will have any risk before implementing it, how to avoid the risk, how serious the risk should be, and whether there is any remedy measures and so on, that is, to enhance safety consciousness of the enterprise employees. For example, workers with bad safety consciousness would put the broken glass replaced on the trash, but a strong safety consciousness worker will consider whether it will cut others. [Pg.629]

The latest development is new coil fiber technology that provides excellent cut resistance with unmatched dexterity. The technology behind these newest fibers in the hand protection arena combines a stainless steel core with DuPont Kevlar s proven cut-resistance for ultimate hand protection from cuts and lacerations. Everyone — from road construction workers, who will likely wear the hi-vis glove models with this new fiber, to masons, roofers, carpenters, glass cutters and virtually every other construction trade — stands to benefit from this next step in hand protection evolution. [Pg.60]

Inattentive laboratory workers are particularly susceptible to needle accidents. When not handled properly, needles can easily and quickly iqject chemicals into the body. Broken glass containers that held toxic chemicals can also cut the skin and expose a worker to blood contamination. [Pg.12]

Protective materials based on hard guard plates otter effective abrasion and cut protection, and will resist puncture threats from large penetrators. However, by their very design, these fabrics wiii oniy stop small penetrators like hypodermic needles and glass shards if the threat hits a guard plate. Multiple layers of this material might improve the chances that a puncture threat hits a plate, but worker comfort and productivity will decrease dramatically as bulk increases. [Pg.68]


See other pages where Cutting glass workers is mentioned: [Pg.30]    [Pg.637]    [Pg.64]    [Pg.64]    [Pg.155]    [Pg.4]    [Pg.70]    [Pg.4]    [Pg.458]    [Pg.349]    [Pg.458]    [Pg.56]    [Pg.129]    [Pg.66]    [Pg.559]    [Pg.56]    [Pg.559]    [Pg.268]    [Pg.100]    [Pg.202]    [Pg.327]    [Pg.165]    [Pg.3]    [Pg.66]    [Pg.559]    [Pg.56]    [Pg.3]    [Pg.150]    [Pg.1018]    [Pg.347]    [Pg.348]    [Pg.58]    [Pg.66]    [Pg.259]    [Pg.354]    [Pg.49]    [Pg.124]    [Pg.845]    [Pg.980]    [Pg.632]    [Pg.6419]    [Pg.2]    [Pg.32]    [Pg.190]    [Pg.193]    [Pg.195]   
See also in sourсe #XX -- [ Pg.956 ]




SEARCH



Glass workers

© 2024 chempedia.info