Cuprous iodide-catalyzed reaction

As already mentioned, the nature of the copper counter ion also has a dramatic effect on the rate and efficiency of the reaction. For example, the cuprous iodide-catalyzed reaction takes nearly 40 min to reach the maximum rate and over 100 min to reach full conversion (0.1 M in [azide] = [alkyne] = 0.1 M, [CuI/TTTA] = 0.005 M), whereas the replacement of the iodide with much weaker coordinating tetrafluor-oborate (by treating the reaction solution with 0.005 M of silver tetrafluoroborate salt) propels the reaction to completion within minutes (with v ax t least 10 times higher than for the Cul system). 

Cuprous iodide catalyzes the reaction of various alkyl chlorides, bromides, and iodides in hexamethylphosphoric triamide (HMPT), to give the complexed product RaSnXj, which can then be further alkylated with a Grignard reagent, or can be hydrolyzed to the oxide and converted into various other compounds, R2SnY2 (43). This promises to be a useful laboratory method, e.g.,... 

A synthetically useful virtue of enol triflates is that they are amenable to palladium-catalyzed carbon-carbon bond-forming reactions under mild conditions. When a solution of enol triflate 21 and tetrakis(triphenylphosphine)palladium(o) in benzene is treated with a mixture of terminal alkyne 17, n-propylamine, and cuprous iodide,17 intermediate 22 is formed in 76-84% yield. Although a partial hydrogenation of the alkyne in 22 could conceivably secure the formation of the cis C1-C2 olefin, a chemoselective hydrobora-tion/protonation sequence was found to be a much more reliable and suitable alternative. Thus, sequential hydroboration of the alkyne 22 with dicyclohexylborane, protonolysis, oxidative workup, and hydrolysis of the oxabicyclo[2.2.2]octyl ester protecting group gives dienic carboxylic acid 15 in a yield of 86% from 22. 

Kotschy et al. also reported a palladium/charcoal-catalyzed Sono-gashira reaction in aqueous media. In the presence of Pd/C, Cul, PPI13, and z -Pr2NH base, terminal alkynes smoothly reacted with aryl bromides or chlorides, such as 2-pyridyl chloride, 4-methylphenyl bromide, and so on, to give the expected alkyne products in dimethyl-acetamide (DMA)-H20 solvent. Wang et al. reported an efficient cross-coupling of terminal alkynes with aromatic iodides or bromides in the presence of palladium/charcoal, potassium fluoride, cuprous iodide, and triph-enylphosphine in aqueous media (THF/H20, v/v, 3/1) at 60°C.35 The palladium powder is easily recovered and is effective for six consecutive runs with no significant loss of catalytic activity. 

A rapid MW-assisted palladium-catalyzed coupling of heteroaryl and aryl boronic acids with iodo- and bromo-substituted benzoic acids, anchored on TentaGel has been achieved [174]. An environmentally friendly Suzuki cross-coupling reaction has been developed that uses polyethylene glycol (PEG) as the reaction medium and palladium chloride as a catalyst [175]. A solventless Suzuki coupling has also been reported on palladium-doped alumina in the presence of potassium fluoride as a base [176], This approach has been extended to Sonogashira coupling reaction wherein terminal alkynes couple readily with aryl or alkenyl iodides on palladium-doped alumina in the presence of triphenylphosphine and cuprous iodide (Scheme 6.52) [177]. 

Wang s approach for the synthesis of enyne-allenes focused on ene-allenyl iodide 45 (Scheme 14.12) [24]. Palladium-catalyzed Sonogashira reaction of 45 with terminal alkynes 46 (R= Ph or CH2OH) proceeded smoothly under mild reaction conditions in the presence of the cocatalyst cuprous iodide and n-butylamine. The initially formed enyne-allene 47b with substituent R= CH2OH cyclized spontaneously to the corresponding a-methylstyrene derivative 48. 

In a recent series of studies focused on the synthetic utility of alkenyliodo-nium salts, ( )-/J-phenylethenyl(phenyl)- and ( )-l-hexenyl(phenyl)iodonium tetrafluoroborates, 22 and 23, were utilized for alkenylations of a range of soft, anionic nucleophiles (Scheme 45) [128-135]. In all cases but one, alkenylations with 22 occurred with retention of configuration, while alkenylations with 23 occurred with inversion of configuration. Only the dialkyl phosphoroselenolate salts gave mixtures of (Z)- and (fj)-products with 22 [132]. Furthermore, although cuprous iodide was used to catalyze the reactions of 22 and 23 with the phosphorothioate and -dithioate salts, the stereochemical results were the same [131,133]. It was generally assumed that retention was an outcome of the ligandcoupling or addition-elimination pathways, while stereochemical inversion was attributed to the vinylic... 

The metal catalyzed reaction with ammonia or amines likely proceeds by the SNAr mechanism. This reaction, with phase-transfer catalysis, has been used to synthesize triarylamines. Copper ion catalysts (especially cuprous oxide or iodide) also permit the Gabriel synthesis (10-41) to be applied to aromatic substrates. Aryl bromides or iodides are refluxed with potassium phthalimide and... 

As described above (Section 5.2), the Stephens-Castro reaction of alkynylcopper with aryl and vinyl halides in boiling pyridine is a useful route to aryl and vinyl acetylenes. Direct cross-coupling of organic halides, such as sp halides, with terminal alkynes is a more convenient procedure. Such a reaction is not so easy, but it can be done using a Pd-complex catalyst [41]. Especially facile Pd-catalyzed cross-coupling of aryl and alkenyl halides with terminal alkynes proceeds smoothly under mild conditions in the presence of a cocatalyst of cuprous iodide in amine solvents [Eq. (28)] [42]. This methodology is now used widely for the constiuction of conjugated arylalkyne or enyne systems [43], as described below. It is attractive from a synthetic point of view because mild reaction conditions and simplicity of the procedure are associated with recent developments in modem acetylene chemistry [44]. 

Support for this view comes from their work on the stereochemistry of 1.6-addition (catalyzed by cupric acetate) of methyl-, ethyl-, isopropyl-, and -butylmagnesium halides on dienone 237 93% of the axial isomer 139 was obtained with CH3MgI, 98% with C2H5MgBr and 100% with (083)2 CHMgBr and (CH3)3CMgCl. Campbell and Babcock (49) have also studied the cuprous catalyzed reaction of methylmagnesium iodide with various steroidal 4,6-dien-3-ones. They found axially substituted C-7 methyl derivatives as the predominant 1,6-adducts. 

Redox potentials of the halide ions explain that direct electron release to the benzenediazonium ion takes place only with iodide (and astatide, At ). This corresponds well with experience in organic synthesis iodo-de-diazoniations are possible without catalysts, light or other special procedures. For bromo- and chloro-de-diazoniations, catalysis by cuprous salts (Sandmeyer reaction) is necessary. For fluorination, the Balz-Schiemann reaction of arenediazonium tetrafluoroborates in the solid state (thermolysis) or in special solvents must be chosen, i.e. a heterolytic dediazoniation without electron transfer. GaUi demonstrated that in chloro-de-diazoniations the yield is strongly dependent on the redox potential of electron transfer catalysts (highest yields with Cu" and Sn +), but that the rate of electron transfer influences the yield also. Electron transfer is likely to be the rate-limiting step of aryl radical formation in dediazoniations catalyzed by transition metal salts. 

Cuprous-catalyzed replacement reactions are called Sandmeyer reactions aryl chlorides, bromides, cyanides, and nitro compounds are prepared in this way formation of aryl iodides requires no catalyst, fluorides are obtained by heating diazonium fluoroborates (i.e., Schiemann reaction) benzenols are obtained by warming aqueous diazonium salt solutions. 

Aryl bromides and iodides are usually prepared from diazonium salts by a copper-catalyzed process, a reaction commonly known as the Sandmeyer reaction. Under the classic conditions of the Sandmeyer reaction, the diazonium salt is added to a hot acidic solution of the cuprous halide.It is also possible to convert anilines to aryl halides by generating the diazonium ion in situ. Reaction of anilines with alkyl nitrites and cuprous halides in acetonitrile gives good yields of aryl bromides by a copper-mediated process which is mechanistically similar to that occurring under the usual Sandmeyer conditions. Diazonium salts can also be converted to... 

---