Cuprous formate

The only reaction which calls for comment here is the formation of red cuprous acetylide with an ammoniacal solution of cuprous chloride ... 

It has been stated that many halogen-free compounds, e.g., certain derivatives of pyridine and quinoline, purines, acid amides and cyano compounds, when ignited on copper oxide impart a green colour to the dame, presumably owing to the formation of volatile cuprous cyanide. The test is therefore not always trustworthy. The test is not given by duorides. 

The following mechanism of the Sandmeyer reaction has been proposed as a result of a kinetic study, and incidentally accounts for the formation of the azu compounds as by-products. The catalyst is the CuCl ion produced in the dissolution of cuprous chloride in the chloride solution ... 

Bronze disease necessitates immediate action to halt the process and remove the cause. For a long time, stabilization was sought by removal of the cuprous chloride by immersing the object in a solution of sodium sesquicarbonate. This process was, however, extremely time-consuming, frequentiy unsuccesshil, and often the cause of unpleasant discolorations of the patina. Objects affected by bronze disease are mostiy treated by immersion in, or surface appHcation of, 1 H-henzotriazole [95-14-7] C H N, a corrosion inhibitor for copper. A localized treatment is the excavation of cuprous chloride from the affected area until bare metal is obtained, followed by appHcation of moist, freshly precipitated silver oxide which serves to stabilize the chloride by formation of silver chloride. Subsequent storage in very dry conditions is generally recommended to prevent recurrence. 

Cuprous salts catalyze the oligomerization of acetylene to vinylacetylene and divinylacetylene (38). The former compound is the raw material for the production of chloroprene monomer and polymers derived from it. Nickel catalysts with the appropriate ligands smoothly convert acetylene to benzene (39) or 1,3,5,7-cyclooctatetraene (40—42). Polymer formation accompanies these transition-metal catalyzed syntheses. 

General Methods. Traces of acetylene can be detected by passing the gas through Ilosvay s solution which contains a cuprous salt in ammoniacal solution. The presence of acetylene is indicated by a pink or red coloration caused by the formation of cuprous acetyHde, CU2C2. The same method can be used for the quantitative deterrnination of acetylene in parts per biUion concentrations the copper acetyHde is measured colorimetricaHy (87). 

Bromination of isoprene using Br2 at —5 ° C in chloroform yields only /n j -l,4-dibromo-2-methyl-2-butene (59). Dry hydrogen chloride reacts with one-third excess of isoprene at —15 ° C to form the 1,2-addition product, 2-chloro-2-methyl-3-butene (60). When an equimolar amount of HCl is used, the principal product is the 1,4-addition product, l-chloro-3-methyl-2-butene (61). The mechanism of addition is essentially all 1,2 with a subsequent isomerization step which is catalyzed by HCl and is responsible for the formation of the 1,4-product (60). The 3,4-product, 3-bromo-2-methyl-1-butene, is obtained by the reaction of isoprene with 50% HBr in the presence of cuprous bromide (59). Isoprene reacts with the reactive halogen of 3-chlorocyclopentene (62). 

Copper Corrosion Inhibitors. The most effective corrosion inhibitors for copper and its alloys are the aromatic triazoles, such as benzotriazole (BZT) and tolyltriazole (TTA). These compounds bond direcdy with cuprous oxide (CU2O) at the metal surface, forming a "chemisorbed" film. The plane of the triazole Hes parallel to the metal surface, thus each molecule covers a relatively large surface area. The exact mechanism of inhibition is unknown. Various studies indicate anodic inhibition, cathodic inhibition, or a combination of the two. Other studies indicate the formation of an insulating layer between the water surface and the metal surface. A recent study supports the idea of an electronic stabilization mechanism. The protective cuprous oxide layer is prevented from oxidizing to the nonprotective cupric oxide. This is an anodic mechanism. However, the triazole film exhibits some cathodic properties as well. 

In the initial formation of the cupric xanthates, soluble xanthate complexes form prior to the precipitation of the cuprous xanthate with the concurrent formation of the dixanthogen (51). The dixanthogen can be separated by virtue of its solubiUty in ether. Older samples of alkah metal xanthates contain some dixanthogen, which is thought to form by the following reaction (33) ... 

Dimethyl carbonate [616-38-6] and dimethyl oxalate [553-90-2] are both obtained from carbon monoxide, oxygen, and methanol at 363 K and 10 MPa (100 atm) or less. The choice of catalyst is critical cuprous chloride (66) gives the carbonate (eq. 20) a palladium chloride—copper chloride mixture (67,68) gives the oxalate, (eq. 21). Anhydrous conditions should be maintained by removing product water to minimize the formation of by-product carbon dioxide. 

Gosorb Process. Like the copper—Hquor scmbbing method, the Cosorb process also reHes on the formation of a cuprous complex of carbon monoxide but uses a nonaqueous organic solvent. The preferred system uses a cuprous tetrachloroalurninate toluene complex in a toluene solvent (90). Many other organometaUic complex variants have been proposed (91—93) but have not been commercialized. 

The darkening reaction involves the formation of silver metal within the silver haUde particles containing traces of cuprous haUde. With the formation of metallic silver, cuprous ions are oxidized to cupric ions (1,4). The thermal or photochemical (optical bleaching) reversion to the colorless or bleached state corresponds to the reoxidation of silver to silver ion and the reduction of cupric ion to reform cuprous ion. 

The tri- or tetraamine complex of copper(I), prepared by reduction of the copper(II) tetraamine complex with copper metal, is quite stable ia the absence of air. If the solution is acidified with a noncomplexiag acid, the formation of copper metal, and copper(II) ion, is immediate. If hydrochloric acid is used for the neutralization of the ammonia, the iasoluble cuprous chloride [7758-89-6], CuCl, is precipitated initially, followed by formation of the soluble ions [CuClj, [CuCl, and [CuCl as acid is iacreased ia the system. 

Heat a small quantity with Fehling s solution and observe the formation of cuprous oxide. The hydrazobenzene is oxidised to azobenzene. 

Some of the cuprous chloride compounds of the diazonium salts have been isolated and analysed, and coirespond to the formula CoH.-.NjCl.CuoCIo (Hantzsch). The formation of a crystalline copper compound is rendeied very evident in the present preparation.. A modification of Sandmeyer s reaction IS the introduction of precipitated metallic copper in place of the cuprous salt (Gattermann). 

The allylic position of olefins is subject to attack by free radicals with the consequent formation of stable allylic free radicals. This fact is utilized in many substitution reactions at the allylic position (cf. Chapter 6, Section III). The procedure given here employs f-butyl perbenzoate, which reacts with cuprous ion to liberate /-butoxy radical, the chain reaction initiator. The outcome of the reaction, which has general applicability, is the introduction of a benzoyloxy group in the allylic position. 

Copper is the first member of Group IB of the periodic table, having atomic number 29 and electronic configuration 2.8.18.1. Loss of the outermost electron gives the cuprous ion Cu, and a second electron may be lost in the formation of the cupric ion Cu. ... 

K has the value of about 1 x 10 at 298 K, and in solutions of copper ions in equilibrium with metallic copper, cupric ions therefore greatly predominate (except in very dilute solutions) over cuprous ions. Cupric ions are therefore normally stable and become unstable only when the cuprous ion concentration is very low. A very low concentration of cuprous ions may be produced, in the presence of a suitable anion, by the formation of either an insoluble cuprous salt or a very stable complex cuprous ion. Cuprous salts can therefore exist in contact with water only if they are very sparingly soluble (e.g. cuprous chloride) or are combined in a complex, e.g. [Cu(CN)2) , Cu(NH3)2l. Cuprous sulphate can be prepared in non-aqueous conditions, but because it is not sparingly soluble in water it is immediately decomposed by water to copper and cupric sulphate. 

As feed systems usually contain copper alloys, the use of amines for their protection may seem somewhat strange as copper is prone to attack in ammonia/carbon dioxide/oxygen environments, with the formation of complex cupric or cuprous compounds. The requisite degree of protection can be achieved, however, by maintaining the concentrations strictly within the acceptable target range. 

A synthetically useful virtue of enol triflates is that they are amenable to palladium-catalyzed carbon-carbon bond-forming reactions under mild conditions. When a solution of enol triflate 21 and tetrakis(triphenylphosphine)palladium(o) in benzene is treated with a mixture of terminal alkyne 17, n-propylamine, and cuprous iodide,17 intermediate 22 is formed in 76-84% yield. Although a partial hydrogenation of the alkyne in 22 could conceivably secure the formation of the cis C1-C2 olefin, a chemoselective hydrobora-tion/protonation sequence was found to be a much more reliable and suitable alternative. Thus, sequential hydroboration of the alkyne 22 with dicyclohexylborane, protonolysis, oxidative workup, and hydrolysis of the oxabicyclo[2.2.2]octyl ester protecting group gives dienic carboxylic acid 15 in a yield of 86% from 22. 

Passivation under a wide range of operating conditions and in all boiler designs is a goal of all BW treatment programs. It is achieved through the formation of a stable, continuous, uniform, self-limited, and nonporous magnetite film. (This objective also applies to the maintenance of cuprous oxide, the copper equivalent of a film of passive iron.)... 

NOTE Cupric copper (Cu2+) is a catalyst for the hydrazine-oxygen reaction, as well as a catalyst for sulfite, DEHA, erythorbic acid, and hydroquinone. Cuprous copper (Cu+) acts as a complexing agent in the desirable formation of protective, pasivated copper oxide films. 

---