Copolymers strength

The importance of the proper selection of Tg and hence the copolymer strength is further illustrated by the specific example of styrene/butadiene copolymers. 

Superabsorbents. Water-sweUable polymers are used extensively in consumer articles and for industrial appUcations. Most of these polymers are cross-linked acryUc copolymers of metal salts of acryUc acid and acrylamide or other monomers such as 2-acrylamido-2-methylpropanesulfonic acid. These hydrogel forming systems can have high gel strength as measured by the shear modulus (134). Sometimes inorganic water-insoluble powder is blended with the polymer to increase gel strength (135). Patents describe processes for making cross-linked polyurethane foams which contain superabsorbent polymers (136,137). 

Adhesives. Acryhc emulsion and solution polymers form the basis of a variety of adhesive types. The principal use is in pressure-sensitive adhesives, where a film of a very low T (<—20 " C) acrylic polymer or copolymer is used on the adherent side of tapes, decals, and labels. Acrylics provide a good balance of tack and bond strength with exceptional color stabiUty and resistance to aging (201,202). AcryUcs also find use in numerous types of constmction adhesive formulations and as film-to-film laminating adhesives (qv). 

The properties of SAN resins depend on their acrylonittile content. Both melt viscosity and hardness increase with increasing acrylonittile level. Unnotched impact and flexural strengths depict dramatic maxima at ca 87.5 mol % (78 wt %) acrylonitrile (8). With increasing acrylonitrile content, copolymers show continuous improvements in barrier properties and chemical and uv resistance, but thermal stabiUty deteriorates (9). The glass-transition... 

Pentaerythritol in rosin ester form is used in hot-melt adhesive formulations, especially ethylene—vinyl acetate (EVA) copolymers, as a tackifier. Polyethers of pentaerythritol or trim ethyl ol eth an e are also used in EVA and polyurethane adhesives, which exhibit excellent bond strength and water resistance. The adhesives maybe available as EVA melts or dispersions (90,91) or as thixotropic, one-package, curable polyurethanes (92). Pentaerythritol spko ortho esters have been used in epoxy resin adhesives (93). The EVA adhesives are especially suitable for cellulose (paper, etc) bonding. 

Some cast (unoriented) polypropylene film is produced. Its clarity and heat sealabiUty make it ideal for textile packaging and overwrap. The use of copolymers with ethylene improves low temperature impact, which is the primary problem with unoriented PP film. Orientation improves the clarity and stiffness of polypropylene film, and dramatically increases low temperature impact strength. BOPP film, however, is not readily heat-sealed and so is coextmded or coated with resins with lower melting points than the polypropylene shrinkage temperature. These layers may also provide improved barrier properties. 

Copolymeis of ethylene [74-85-1] and tetiafluoioethylene [116-14-3] (ETFE) have been alaboiatory curiosity for more than 40 years. These polymers were studied in connection with a search for a melt-fabricable PTFE resin (1 5) interest in them fell with the discovery of TFE—HFP (FEP) copolymers (6). In the 1960s, however, it became evident that a melt-fabricable fluorocarbon resin was needed with higher strength and stiffness than those of PTFE resins. Earlier studies indicated that TFE—ethylene copolymers [11939-51 -6] might have the right combination of properties. Subsequent research efforts (7) led to the introduction of modified ethylene—tetrafluoroethylene polymer [25038-71-5] (Tefzel) by E. I. du Pont de Nemours Co., Inc, in 1970. 

Modified ETEE copolymer has excellent weather resistance tensile strength and elongation ate not affected. On the other hand, tensile and elongation properties of the glass-reiaforced compound show a significant reduction. 

Ethylene—tetrafluoroethylene copolymers respond weU to melt bonding to untreated aluminum, steel, and copper with peel strengths above 3.5 kN/m (20 Ibf/in.). Eor melt bonding to itself, hot-plate welding is used. The material is heated to 271—276°C, and the parts are pressed together during cooling. 

The combination of stmctural strength and flotation has stimulated the design of pleasure boats using a foamed-in-place polyurethane between thin skins of high tensUe strength (231). Other ceUular polymers that have been used in considerable quantities for buoyancy appHcations are those produced from polyethylene, poly(vinyl chloride), and certain types of mbber. The susceptibUity of polystyrene foams to attack by certain petroleum products that are likely to come in contact with boats led to the development of foams from copolymers of styrene and acrylonitrUe which are resistant to these materials... 

Fig. 26. Qualitative compatison of substrate materials for optical disks (187) An = birefringence IS = impact strength BM = bending modulus HDT = heat distortion temperature Met = metallizability WA = water absorption Proc = processibility. The materials are bisphenol A—polycarbonate (BPA-PC), copolymer (20 80) of BPA-PC and trimethylcyclohexane—polycarbonate (TMC-PC), poly(methyl methacrylate) (PMMA), uv-curable cross-linked polymer (uv-DM), cycHc polyolefins (CPO), and, for comparison, glass.

Strong" Acid Cation Excha.ngers. AH strong acid-type resins are made from styrene—DVB copolymers, with the exception of a minor quantity of phenoHc resin. Batch sulfonation using commercial strength sulfuric acid [8014-95-1] is common. 

The polyamides are soluble in high strength sulfuric acid or in mixtures of hexamethylphosphoramide, /V, /V- dim ethyl acetam i de and LiCl. In the latter, compHcated relationships exist between solvent composition and the temperature at which the Hquid crystal phase forms. The polyamide solutions show an abmpt decrease in viscosity which is characteristic of mesophase formation when a critical volume fraction of polymer ( ) is exceeded. The viscosity may decrease, however, in the Hquid crystal phase if the molecular ordering allows the rod-shaped entities to gHde past one another more easily despite the higher concentration. The Hquid crystal phase is optically anisotropic and the texture is nematic. The nematic texture can be transformed to a chiral nematic texture by adding chiral species as a dopant or incorporating a chiral unit in the main chain as a copolymer (30). 

Content of Ot-Olefin. An increase in the a-olefin content of a copolymer results in a decrease of both crystallinity and density, accompanied by a significant reduction of the polymer mechanical modulus (stiffness). Eor example, the modulus values of ethylene—1-butene copolymers with a nonuniform compositional distribution decrease as shown in Table 2 (6). A similar dependence exists for ethylene—1-octene copolymers with uniform branching distribution (7), even though all such materials are, in general, much more elastic (see Table 2). An increase in the a-olefin content in the copolymers also results in a decrease of their tensile strength but a small increase in the elongation at break (8). These two dependencies, however, are not as pronounced as that for the resin modulus. 

---