Copier paper

Figure 7.9 Light photomacrograph of fracture line of a 15 mm wide tensile test strip of copier paper (60% hardwood, 40% softwood). Scale bar= 2 mm.

Both soluble dyes and dispersible pigments are employed as colorants in inkjet inks. The choice of colorant type depends somewhat on the application and media to be used. For example, on plain copier paper, light that is reflected off the surface of the ink film... 

Zinc oxides is mainly used in the rubber industry in which it serves as an activator in the vulcanization process. Its low hardness and high compatibility with polymers are important for its utilization in chemical materials. In its utilization in paints, its tendency to form zinc soaps, which hinder the attack of coatings by fungus and improve the aging resi.stance (UV-absorption), is important. Further application fields for zinc oxide are in copier paper, glues, pharmaceutical products, cosmetic products and dental cements. 

The FTIR is accurate. So you don t have to run a reference polystyrene. Unfortunately, we plot the spectra on inexpensive copier paper and if you don t mark relevant peaks on the screen with the software, you may never get those really accurate frequencies to 0.01 cm . 

A small proportion of caffeine finds application in pharmaceuticals for the treatment of migraine, pain and fever. It is occasionally administered in combination with analgesics, since caffeine augments their activity. The cosmetics industry uses caffeine as a blood-circulation-enhancing agent for skin preparations. Caffeine is needed for the production of copier paper ( Diazopaper ). The lion s share however accounts for sodas and energy drinks (Coca-Cola , PepsiCola , Red BulP), but also a host of other caffeinated food products, which has already attracted the FDA s attention. 

Before use, clean the measuring surfaces by gripping a piece of clean paper (copier paper is ideal) between the jaws and slowly pull it out. Ensure the instrument reads zero before taking a measurement. Always ensure digital models are zeroed. 

Economic Aspects. Table 3 shows that mbber production is the largest market for zinc oxide the downturn in 1980 resulted from a drop in tire production because of the production trend to smaller tires, more importation of tires, and a recession. The drop in paint usage reflects the trend to water-base paints, which originally contained no zinc oxide. However, its growing use in such paints is based upon improved formulations based on zinc oxide. The increased use in agriculture is a result of the realization of the importance of zinc as a trace element. The rise in use of zinc-oxide-coated paper for photocopying is followed by a slackening in use because of a shift to plain-paper copiers. 

HP arsenic is used in the manufacture of photoreceptor arsenic-selenium alloys for xerographic plain paper copiers (see Electrophotography). The level of arsenic maybe 0.5%, 5.0%, or 35% present as arsenic triselenide [1303-36-2] As2Se2. 

The XeroX Copier Machine Model A was announced in 1949, and involved compHcated manual operation. Copies of acceptable quaUty were operator dependent. The Copyflo printer, introduced in 1955, was the first automated xerographic machine and enabled the production of copies on a continuous web of ordinary paper. Early electrophotographic products used paper coated with dye-sensitized zinc oxide Electrofax which had met market resistance in terms of aesthetics and cost, so that in 1958 the total market was only about 100 million (1—3,5). 

Wolkoff, P., Wilkins, C.K., Clausen, P.A. and Larsen, K. (1993) Comparison of volatile organic compounds from processed paper and toners from office copiers and printers. Indoor Air, 3, 113-23. 

Be courteous when working with printers, staplers, and other office equipment. For example, do not leave printers without paper, a copier without paper, or if you used the last staple, refill the stapler. 

Hence it was possible to be somewhat more abreast of the literature than if one had to rely on Chemical Abstracts, which then lagged considerably behind. It must be recalled that it was far more difficult during that period to obtain copies of articles that appeared in journals, because the electrophotographic copiers were not with us yet, and copies of a referenced article had to be microphotograped and reprinted on photographic paper in our excellent Lavoisier Library. Of course, there were then far fewer journals that had to be followed. 

---