Contents Synthetic Polymers

The Textile Eiber Product Identification Act (TEPIA) requires that the fiber content of textile articles be labeled (16). The Eederal Trade Commission estabhshed and periodically refines the generic fiber definitions. The current definition for a polyester fiber is "A manufactured fiber ia which the fiber-forming substance is any long-chain synthetic polymer composed of at least 85% by weight of an ester of a substituted aromatic carboxyUc acid, including but not restricted to terephthalate units, and para substituted hydroxyben2oate units."... 

Vinylidene chloride copolymers were among the first synthetic polymers to be commercialized. Their most valuable property is low permeabiUty to a wide range of gases and vapors. From the beginning in 1939, the word Saran has been used for polymers with high vinylidene chloride content, and it is still a trademark of The Dow Chemical Company in some countries. Sometimes Saran and poly (vinylidene chloride) are used interchangeably in the Hterature. This can lead to confusion because, although Saran includes the homopolymer, only copolymers have commercial importance. The homopolymer, ie, poly (vinylidene chloride), is not commonly used because it is difficult to fabricate. 

Pretreatment Chemicals Even though the suspended solids concentration of the slurry to be tested may be correct, it is frequently necessary to modify the sluriy in order to provide an acceptable filtration rate, washing rate, or final cake moisture content. The most common treatment, and one which may provide improvement in all three of these categories, is the addition of flocculating agents, either inorganic chemicals or natural or synthetic polymers. The main task at this point is to determine which is the most effective chemical and the quantity of chemical which should be used. 

It is established, that the natural and synthetic polymers influence on spectrophotometrical, protolytical and complex-formating properties of azodyes in different degree. The result of interaction between anions of organic dyes and polymers is formation of specifical hydrophobic-hydrated adducts. Express spectrophotometrical methods of polymer content determination in water solutions with the help of polymer adducts have been elaborated. 

For the results reported in both Table 7.2-3 and Table 7.2-4, the only reported detail concerning the ionic liquid was that it was [EMIM][C1-A1C13]. No details of the aluminium(III) chloride content were forthcoming. As with most of the work presented in this chapter, data are taken from the patent literature and not from peer reviewed journals, and so many experimental details are not available. This lack of clear reporting complicates issues for the synthetic polymer chemist. Simpler and cheaper chloroaluminate(III) ionic liquids prepared by using cations derived from the reaction between a simple amine and hydrochloric acid (e.g., Me3N-E3Cl and... 

The influence of the solvent on chiroptical properties of synthetic polymers is dramatically illustrated in the case of poly (propylene oxide). Price and Osgan had already shown, in their first article, that this polymer presents optical activity of opposite sign when dissolved in CHCI3 or in benzene (78). The hypothesis of a conformational transition similar to the helix-coil transition of polypeptides was rejected because the optical activity varies linearly with the content of the two components in the mixture of solvents. Chiellini observed that the ORD curves in several solvents show a maximum around 235 nm, which should not be attributed to a Cotton effect and which was interpreted by a two-term Drude equation. He emphasized the influence of solvation on the position of the conformational equilibrium (383). In turn, Furakawa, as the result of an investigation in 35 different solvents, focused on the polarizability change of methyl and methylene groups in the polymer due to the formation of a contact complex with aromatic solvents (384). 

This versatility gives the synthetic polymer chemist a tool to tailor the chain of the polybutadiene to fit the desired application. It can be used to manipulate the low temperature properties important in rubber goods and tire applications. Moreover, the chemical reaction that chemists want to perform on these rubbers can be altered, depending on the reactivity of the 1,2 polybutadiene double bonds fraction versus that of 1,U polybutadiene. The work of Halasa and co-workers (21) illustrates this point. These workers hydrogenated medium vinyl polybutadiene (1,2 content varied between 60-60%... 

The wide variety of enzymes available gives for promise enzymatic derivatization to become a potent analytical tool in the future. Better understanding and theoretical formulations will lead to commercial availability of immobilized enzymes and consequently to more ready use of them. Since in such systems a low content of organic cosolvent in the mobile phase can only be tolerated (whereas a compromise has to be made as far as the optimum mobile phase pH is concerned), artificial enzymes, which are synthetic polymer chains having functional groups that mimic the biocatalytic activity of natural enzymes, are currently being synthesized and investigated as a means to overcome such limitations (276). 

Ecostar (St. Lawrence Starch Company). This product associates PE with a mixture of starch and auto-oxidant unsaturated fatty acids. The global content of starch is between 6 and 15%. The degradation process then follows two mechanisms in the first, the starch is fragmented, then assimilated by microorganisms, whereas in the second, the interaction between the auto-oxidants and the metallic complexes from soil or water gives peroxides that attack the synthetic polymer chains. 

Another proposed process employed injection molding in which starch and limited amounts of plasticizing water are heated under pressure to temperatures above the Tg and Tm to transform the native starch into a homogenous, destructured, thermoplastic melt. The process melt is then cooled to below the Tg of the system before pressure release to maintain the moisture content. Additives include natural and synthetic polymers, plasticizers and lubricants.136-139 159 160 The technology has been used to prepare pharmaceutical capsules and shaped objects, such as disposable cutlery, straws and pens. 

Also the diffusivity of water in polymers is highly dependent on the polymer-water interaction. When a polymer contains many hydrogen-bonding groups (cellulose, poly (vinyl alcohol), proteins, etc., and to a lesser extent synthetic polyamides) the diffusivity increases with the water content. This is explained by the strong localisation of the initially sorbed water over a limited number of sites, whereas at higher water contents the polymer... 

Synthetic polymers from alkene monomers are also a major target for epoxidizers. Polyisoprenes,26 polybutenes and polybutadienes have all been epoxidized by general in situ peracid methods. In the case of liquid polybutadienes, a wide range of types is available. Products with varying contents of 1,4-cis, 1,4-trans, and 1,2-vinyl alkene groups are available (Figure 3.6). 

---