Coating medium

To reduce the ensyme dust level ia detergent factories to an absolute minimum, the majority of detergent ensyme granulates are coated with a layer of iaert material. This coating can also be used for coloring purposes. The color of the ensyme granulate itself is often brown. Titanium dioxide [13463-67-7] can be added to the coating medium to make the product whiter alternatively, another attractive color can be added. 

The culture dishes have to be prepared 24 h before use. They have to be coated with the coating medium. 

The sol-gel method is widely used to obtain oxide layers on the walls of microchannels. This method is advantageous because a large variety of compositions can be produced, and porosity and surface texture can be tailored. The sol-gel method is also used for the preparation of particulate porous catalytic supports [155,201,202], The colloidal metal oxide sols can be prepared by various methods such as reactions of metal salts with water or by hydrolysis and polycondensation of metal alkoxides. The latter is the most versatile procedure and has been investigated extensively. Often the sol contains varying concentrations of solid particles, and the procedure is no longer a sol-gel but rather a hybrid method, with the coating medium being a mixture between a sol and a suspension (Table 3). 

Figure 9.4 Schematic showing the transmission and reflectivity of light incident on a film stack of top antireflection coating (medium 2) coated on top of a photoresist film (medium 3) at normal incidence. The medium above the top antireflection coating is air (medium 1).

Huttlin, H. (2004). Method for treating particulate material with a coating medium and an apparatus for carrying out the method. US Patent No 6,740,162. 

Chem. Descrip. 1,1,1-Trichloroethane CAS 71-55-6 EINECS/ELINCS 200-756-3 Uses Solvent for adhesives, coatings medium tor phenolic resin-MgO reaction... 

C18-Mt and ESO were mixed using a solvent. The solvent was then washed out and cast films were produced. Uniform films are obtained using 5% to 20% of clay. XRD and TEM measurements confirmed that the clay was dispersed and flexible Aims were successfully produced. These films could be used as a coating medium. 

Specific resistance of cake a Resistance of pre-coated medium, Rm Concentration of solids, c Liquid viscosity, p Bulk density of precoat layer Cost of filter aid... 

Currently, several specially designed machines and techniques are available for applying a coating to a textile subsbate. In general, the particular type chosen is governed mainly by the consistency of the coating medium, which may be in the form of a liquid, paste, melt, powder, granulate, or foam. Another factor which deter-... 

In direct coating, the web is supported by a backing roll and the coating medium is fed in excess onto the web. After a certain distance, defining the dwell time , the coat layer is metered down to the final thickness, being the desired coat weight. 

In the roll apphcator or LDTA (long dwell time appHcator), feeding is done with a roU, which draws the coating medium from a pan onto the web (Fig. 7.25). 

The final metering of the applied coating is often performed with a blade. With this blade, most of the coating medium is removed and returns to the working tank. The coat layer remaining on the paper or board is evenly distributed. The blade pressure ensures that the surface voids of the web are filled with coating. 

Light Task Plus II Black , Dirt Hiding, Bi-Polymer Coated Light Task Plus 3" PU Palm Coated, Medium Weight... 

LBS has been coated on spinel LiMn204 by a solid-state method, followed by heating at 425°C for 5 h in air. The LBS coating medium is not incorporated in the spinel bulk structure, and the coating particles are homogeneously distributed on the surface of the spinel powders. The electrochemical performance of the coated LiMn204 is improved due to the suppression of Mn + dissolution into the electrolyte via the LBS glass layer. 

---