Adhesives and Coatings

Resins formed from the reaction of poly(vinyl alcohol) with aldehydes. The formal derivative (from methanal) is used in wire coatings and adhesives and the bulyral (from butanal) is used in metal paints, wood-sealers, adhesives and in safety glass interlayers. 

More recently, alternative chemistries have been employed to coat oxide surfaces with SAMs. These have included carboxylic 1129, 1301, hydroxamic 11311, phosphonic 1124, 1321 and phosphoric acids 11331. Potential applications of SAMs on oxide surfaces range from protective coatings and adhesive layers to biosensors. 

Higher alkyl acrylates and alkyl-functional esters are important in copolymer products, in conventional emulsion appHcations for coatings and adhesives, and as reactants in radiation-cured coatings and inks. In general, they are produced in direct or transesterification batch processes (17,101,102) because of their relatively low volume. 

Itaconic acid is a specialty monomer that affords performance advantages to certain polymeric coatings (qv) (see Polyesters, unsaturated). Emulsion stabihty, flow properties of the formulated coating, and adhesion to substrates are improved by the acid. Acrylonitrile fibers with low levels of the acid comonomer exhibit improved dye receptivity which allows mote efficient dyeing to deeper shades (see Acrylonitrile polymers Fibers, acrylic) (10,11). Itaconic acid has also been incorporated in PAN precursors of carbon and graphite fibers (qv) and into ethylene ionomers (qv) (12). 

Fig. 10. Generalized formulation design outline for radiation-curable coatings and adhesive systems. The cross-linker is a multifimctional unsaturated cross-linking agent or oligomer, rj = viscosity CR = cure rate S = shrinl ge H = hardness F = flexibility A = adhesion 7 = surface energy ...

Pontia.na.k. This resin is a copal and is similar to the alcohol-soluble Manilas. It is partially fossilized, so it melts at a higher temperature. Softening points range from 99—135°C, and acid numbers from about 112—120. Pontianak [9000-14-0] is used in specialty coatings and adhesives. 

Oxidized starches, usually those prepared by hypochlorite oxidation, ate used in paper coatings and adhesives (qv) to improved surface characteristics for printing or writing. Oxidized starches may also be employed as textile warp sizes and finishes, in manufacture of insulation and... 

Unsaturated Polyester Resins (UPR). The principal uses are in putty, coatings, and adhesives. Glass-reinforced UPR is used for marine, constmction, and vehicle materials, as weU as for electrical parts. 

Cellulose nitrate (pyroxylin) [9004-70-0], made from cellulose and a mixture of nitric and sulfuric acids, is called gun cotton and is used in explosives. Nitrates of lower DS find some appHcation in coatings and adhesives. 

Extension of the chlorosulfonation technology to base resins other than polyethylene, where value can be added, seems a logical next step. Polypropylene and ethylene copolymers containing additional functionaUty, ie, maleic anhydride graft, vinyl acetate, acrylic acid, etc, have been chlorinated and chlorosulfonated to broaden the appHcation base, particularly in coatings and adhesives (9,10). 

The above paragraphs indicate some of the major uses of plastics materials, but these materials also find applications in a variety of other areas. In addition, closely related materials such as rubbers, fibres, surface coatings and adhesives are of considerable importance. 

Elevated temperatures are necessary for cure and the chemical resistance of the laminates is inferior to those from unmodified resins. Because of problems in handling, the polyamides have found only limited use with epoxy resins, mainly for coating and adhesive applications. 

G P Coatings and adhesives Adhesives, insulators, paints, sealer for cinder blocks... 

Epoxy resins have outstanding mechanical and electrical properties, dimensional stability, resistance to heat and chemicals, and adhesion to other materials. They are used for casting, potting, encapsulation, protective coatings, and adhesives. Epoxy glues separate the resin from the curing. igciU to be mixed just prior to use. 

In solution polymerization, an organic solvent dissolves the monomer. Solvents should have low chain transfer activity to minimize chain transfer reactions that produce low-molecular-weight polymers. The presence of a solvent makes heat and viscosity control easier than in bulk polymerization. Removal of the solvent may not be necessary in certain applications such as coatings and adhesives. 

A final important class of composite materials is the composite hquids. Composite liquids are highly stmctured fluids based either on particles or droplets in suspension, surfactants, liquid ciystalhne phases, or other macromolecules. A number of composite liquids are essential to the needs of modem industiy and society because they exhibit properties important to special end uses. Examples include lubricants, hydraulic traction fluids, cutting fluids, and oil-drilling muds. Paints, coatings, and adhesives may also be composite liquids. Indeed, composite hquids are valuable in any case where a well-designed liquid state is absolutely essential for proper delivery and action. 

Epoxy resins for printed circuits, castings, rocket motor casings, coatings, and adhesives are almost all made from bisphenol A. Polycarbonates based on bisphenol A are used in glazing applications such as aircraft windows, school windows, and other areas where a combination of toughness and high clarity are required. 

T. Alfredson and J. Tschida, High Performance Size Exclusion Analysis of Coatings and Adhesive Polymer Formulations, Publ. No. LC-122, Varian Instrument Group, Walnut Creek, CA (n.d.). 

Used industrially for the manufacture of plastics, surface coatings, and adhesives pharmaceuticals, dyes, ion exchange resins, corrosion inhibitors, water treatment resins used agriculturally as a pesticide fumigant. 

Properties and Uses Such polymers are soluble in a alcohols. They are commercially available and used for producing films, coatings and adhesives resistant to chemicals and abrasion. Cross-linking can be done with weak organic acids such as citric acid to made them strong and insoluble. 

Other uses for depolymerized PET bottles have been investigated. Used bottles have been glycolized and then used to make unsaturated polyester thermosets and polyol components in rigid polyurethane foam. Evco Research announced in 1999 its EvCote waterproof coatings and adhesives based on recycled PET [17, 18]. 

Polyurethanes are useful in numerous applications such as reaction injection molding, rigid and flexible foams, coatings and adhesives. However, due to the high reactivity of the isocyanate group [96], yielding either dimers, via self-condensation or a carbamate via the reaction with an alcohol, the A,jB-monomers have to be produced in-situ in the reaction vessel. 

The stabilizing of aqueous latexes succeeded by using emulsifiers (anionic, nonionic) and/or their mixture, steric stabilizators (polyvinyl alcohol (PVOH), hydroxyethyl cellulose, polyethylene glycol, new protective colloids etc.), and polymerizable surfaces active agents, in general. Vinyl acetate (VAc) emulsion homopolymers and copolymers (latexes) are widely used as binders in water-based interior and exterior architectural paints, coatings, and adhesives, since they have higher mechanical and water resistance properties than the homopolymers of both monomers [2, 4, 7]. 

---