Chiral alcoholates, asymmetric synthesis

Pirrung, M.C. and Shuey, S.W. (1994) Photoremovable protecting groups for phosphorylation of chiral alcohols. Asymmetric synthesis of phosphotriesters of (—)-3, 5 -dimethoxybenzoin. Journal of Organic Chemistry, 59, 3890-3897. 

Givens58 and Pirrung59 used photolabile 3 3 -dimethoxybenzoin esters for the protection of phosphotriesters. A complication attending the use of racemic 3 5 dimethoxybenzoin is the generation of four diastereoisomers if the phosphate is chiral. An asymmetric synthesis of 3, 5 -dimethoxybenzoin 303 [Scheme 7.30] via the 0-trimethylsilyl-3,5-dimethoxybenzaldehyde cyanohydrin 303 minimises the number of diastereoisomers created in the phosphorylation of chiral alcohols. Thus reaction of 303 with 2 - cyanoethoxy)(NPNf-diisopropy amino)-chlorophosphine afforded the phosphoramidite 30.4 which then reacted with Boc-Ser-OMe to give the two diastereoisomeric phosphotriesters 303, Photode-... 

Soai K, Hori H, Niwa S (1989) Enantioselective addition of dialkylzincs to pyridinecar-baldehyde in the presence of chiral aminoalcohols asymmetric synthesis of pyridylalkyl alcohols. Heterocycles 29 2065-2067... 

Simple esters cannot be allylated with allyl acetates, but the Schiff base 109 derived from o -amino acid esters such as glycine or alanine is allylated with allyl acetate. In this way. the o-allyl-a-amino acid 110 can be prepared after hydrolysis[34]. The Q-allyl-o-aminophosphonate 112 is prepared by allylation of the Schiff base 111 of diethyl aminomethylphosphonates. [35,36]. Asymmetric synthesis in this reaction using the (+ )-A, jV-dicyclohex-ylsulfamoylisobornyl alcohol ester of glycine and DIOP as a chiral ligand achieved 99% ec[72]. 

Industrial Synthetic Improvements. One significant modification of the Stembach process is the result of work by Sumitomo chemists in 1975, in which the optical resolution—reduction sequence is replaced with a more efficient asymmetric conversion of the meso-cyc. 02Lcid (13) to the optically pure i7-lactone (17) (Fig. 3) (25). The cycloacid is reacted with the optically active dihydroxyamine [2964-48-9] (23) to quantitatively yield the chiral imide [85317-83-5] (24). Diastereoselective reduction of the pro-R-carbonyl using sodium borohydride affords the optically pure hydroxyamide [85317-84-6] (25) after recrystaUization. Acid hydrolysis of the amide then yields the desired i7-lactone (17). A similar approach uses chiral alcohols to form diastereomic half-esters stereoselectivity. These are reduced and direedy converted to i7-lactone (26). In both approaches, the desired diastereomeric half-amide or half-ester is formed in excess, thus avoiding the cosdy resolution step required in the Stembach synthesis. 

Scheme 5 details the asymmetric synthesis of dimethylhydrazone 14. The synthesis of this fragment commences with an Evans asymmetric aldol condensation between the boron enolate derived from 21 and trans-2-pentenal (20). Syn aldol adduct 29 is obtained in diastereomerically pure form through a process which defines both the relative and absolute stereochemistry of the newly generated stereogenic centers at carbons 29 and 30 (92 % yield). After reductive removal of the chiral auxiliary, selective silylation of the primary alcohol furnishes 30 in 71 % overall yield. The method employed to achieve the reduction of the C-28 carbonyl is interesting and worthy of comment. The reaction between tri-n-butylbor-... 

One of the first examples of this type of reaction, using a chiral alcohol as an auxiliary, was the asymmetric synthesis of 2-hydroxy-2-phenylpropanoic acid (atrolactic acid, 3, R1 =C6H5 R3 = CH3) by diastereoselective addition of methyl magnesium iodide to the men-thyl ester of phcnylglyoxylie acid4,5 (Table 22). 

Chiral alcohols have also been used in an asymmetric synthesis of sulphoxides based on halogenation of sulphides. Johnson and coworkers have found319 that the reaction of benzyl p-tolyl sulphide with JV-chlorobenzotriazole (NCBT) followed by addition of (—) menthol and silver tetrafluoroborate afforded diastereoisomeric menthoxysulphonium salts 267 which, upon recrystallization and hydrolysis, gave benzyl p-tolyl sulphoxide with 87% optical purity (equation 145). More recently, Oae and coworkers reported320 that optically active diaryl sulphoxides (e.e. up to 20%) were formed either by hydrolysis or thermolysis of the corresponding diaryl menthoxysulphonium salts prepared in situ from diaryl sulphides using ( —) menthol and t-butyl hypochlorite. 

Analogous results were obtained for enol ether bromination. The reaction of ring-substituted a-methoxy-styrenes (ref. 12) and ethoxyvinylethers (ref. 10), for example, leads to solvent-incorporated products in which only methanol attacks the carbon atom bearing the ether substituent. A nice application of these high regio-and chemoselectivities is found in the synthesis of optically active 2-alkylalkanoic acids (ref. 13). The key step of this asymmetric synthesis is the regioselective and chemoselective bromination of the enol ether 4 in which the chiral inductor is tartaric acid, one of the alcohol functions of which acts as an internal nucleophile (eqn. 2). 

Enantioenriched alcohols and amines are valuable building blocks for the synthesis of bioactive compounds. While some of them are available from nature s chiral pool , the large majority is accessible only by asymmetric synthesis or resolution of a racemic mixture. Similarly to DMAP, 64b is readily acylated by acetic anhydride to form a positively charged planar chiral acylpyridinium species [64b-Ac] (Fig. 43). The latter preferentially reacts with one enantiomer of a racemic alcohol by acyl-transfer thereby regenerating the free catalyst. For this type of reaction, the CsPhs-derivatives 64b/d have been found superior. 

Hodous BL, Ruble JC, Fu GC (1999) Enantioselective addition of alcohols to ketenes catalyzed by a planar-chiral azaferrocene catalytic asymmetric synthesis of arylpropionic acids. J Am Chem Soc 121 2637-2638... 

Mikolajczyk and coworkers have summarized other methods which lead to the desired sulfmate esters These are asymmetric oxidation of sulfenamides, kinetic resolution of racemic sulfmates in transesterification with chiral alcohols, kinetic resolution of racemic sulfinates upon treatment with chiral Grignard reagents, optical resolution via cyclodextrin complexes, and esterification of sulfinyl chlorides with chiral alcohols in the presence of optically active amines. None of these methods is very satisfactory since the esters produced are of low enantiomeric purity. However, the reaction of dialkyl sulfites (33) with t-butylmagnesium chloride in the presence of quinine gave the corresponding methyl, ethyl, n-propyl, isopropyl and n-butyl 2,2-dimethylpropane-l-yl sulfinates (34) of 43 to 73% enantiomeric purity in 50 to 84% yield. This made available sulfinate esters for the synthesis of t-butyl sulfoxides (35). 

The subsequent epoxidation of these in situ formed allylic tertiary alcohols yielded the corresponding syn-e oxy alcohols with high levels of diastereo- and enantioselectivity, thus providing a novel one-pot asymmetric synthesis of acyclic chiral epoxyalcohols via a domino vinylation epoxidation reaction (Scheme 4.17). ... 

As another successful application of Noyori s TsDPEN ligand, Yan et al. reported the synthesis of antidepressant duloxetine, in 2008. Thus, the key step of this synthesis was the asymmetric transfer hydrogenation of 3-(dime-thylamino)-l-(thiophen-2-yl)propan-l-one performed in the presence of (5,5)-TsDPEN Ru(II) complex and a HCO2H TEA mixture as the hydrogen donor. The reaction afforded the corresponding chiral alcohol in both high yield and enantioselectivity, which was further converted in two steps into expected (5)-duloxetine, as shown in Scheme 9.17. 

The cis-2,3-diaryl-2,3-dihydro-l,4-benzoxathiin is a very unique structural motif. Other than scattered reports in the literature on the formation of this scaffold, there was no effective asymmetric synthesis for it [6]. We explored two major synthetic approaches to realize the key chiral as-diaryl dihydrobenzoxathiin scaffold, as shown in Scheme 5.3. One was the quinone ketal route in which the quinone ketal 13 and the chiral mercaptol alcohol 14 were the key intermediates. The other approach was the stereo- and enantioselective reduction of the diaryl benzoxathiin 16. The key mercaptol alcohol 14 and the diaryl benzoxathiin 16 were both envisioned to be prepared from the key, common iodoketone intermediate 15. 

Enantiometrically pure alcohols are important and valuable intermediates in the synthesis of pharmaceuticals and other fine chemicals. A variety of synthetic methods have been developed to obtain optically pure alcohols. Among these methods, a straightforward approach is the reduction of prochiral ketones to chiral alcohols. In this context, varieties of chiral metal complexes have been developed as catalysts in asymmetric ketone reductions [ 1-3]. However, in many cases, difficulties remain in the process operation, and in obtaining sufficient enantiomeric purity and productivity [2,3]. In addition, residual metal in the products originating from the metal catalyst presents another challenge because of the ever more stringent regulatory restrictions on the level of metals allowed in pharmaceutical products [4]. An alternative to the chemical asymmetric reduction processes is biocatalytic transformation, which offers... 

Similarly, whole-cell Lactobacillus kefir DSM 20587, which possesses two alcohol dehydrogenases for both asymmetric reduction steps, was applied in the reduction of tert-butyl 6-chloro-3,5-dioxohexanoate for asymmetric synthesis of ft rf-butyl-(31 ,5S)-6-chloro-dihydroxyhexanoate (Figure 7.5), a chiral building block for the HMG-CoA reductase inhibitor [ 17]. A final product concentration of 120 him and a specific product capacity of 2.4 mmol per gram dry cell were achieved in an optimized fed-batch process. Ado 99% was obtained for (3R,5S)- and (3.S, 55)-te/ f-butyl-6-chloro-dihydroxyhexanoate with the space-time yield being 4.7 mmolL-1 h-1. 

The first asymmetric synthesis of (-l-)-abresoline was achieved from the chiral piperidine derivative 153, which upon treatment of its hydroxy side-chain substituent with carbon tetrabromide, triphenylphosphine, and triethyl-amine cyclized to the frarcr-quinazolidine 154. Deketalization and silyl protection of the phenolic group, followed by stereoselective reduction with lithium tri-t -butylborohydride (L-Selectride ), gave an alcohol, which after acylation and deprotection furnished (-l-)-abresoline 155 (Scheme 25) <2005TL2669>. 

O-Alkylation of 4-hydroxy-3-morpholino-l,2,5-thiadiazole 132 has been achieved with the chiral cyclic chloro-methyl sulfite 133 which subsequently suffers ring opening on treatment with simple alcohols <2001RCB436> or alkylamines <2002RJ0213> to afford the timolol analogues 134 with very little racemization (Scheme 20). This indicated an almost exclusive attack of the oxy anion on the exocyclic carbon atom and is a significant improvement on the previous oxirane method, which suffers from racemization. An alternative biocatalytic asymmetric synthesis of (A)- and (R)-timolol has also appeared <2004S1625>. 

An asymmetric synthesis of phosphonylated thiazolines has been described. The phosphonodithioacetate 46 was aminated with a chiral amino alcohol 47 to give the phosphonylated thioamide 48 in good yield. This was then cyclised using a Mitsunobu procedure to give the chiral thiazoline phosphonate 49 in good yields under mild conditions. Homer-Wadsworth-Emmons reaction of these phosphonylated thiazolines gave chiral vinylic thiazolines 50 <00S1143>. 

It is always advisable to examine the complete molecular topology in the neighborhood of the chiral carbon atom and to confirm the results by employing another analytical method before the final assignment. In conclusion, Prelog s rule does predict the steric course of an asymmetric synthesis carried out with a chiral a-keto ester, and the predictions have been found to be correct in most cases. Indeed, this method has been widely used for determining the absolute configuration of secondary alcohols. 

Nucleophilic addition of metal alkyls to carbonyl compounds in the presence of a chiral catalyst has been one of the most extensively explored reactions in asymmetric synthesis. Various chiral amino alcohols as well as diamines with C2 symmetry have been developed as excellent chiral ligands in the enantiose-lective catalytic alkylation of aldehydes with organozincs. Although dialkylzinc compounds are inert to ordinary carbonyl substrates, certain additives can be used to enhance their reactivity. Particularly noteworthy is the finding by Oguni and Omi103 that a small amount of (S)-leucinol catalyzes the reaction of diethylzinc to form (R)-l-phenyl-1 -propanol in 49% ee. This is a case where the... 

Since its discovery in 1980,7 the Sharpless expoxidation of allylic alcohols has become a benchmark classic method in asymmetric synthesis. A wide variety of primary allylic alcohols have been epoxidized with over 90% optical yield and 70-90% chemical yield using TBHP (r-BuOOH) as the oxygen donor and titanium isopropoxide-diethyl tartrate (DET, the most frequently used dialkyl tartrate) as the catalyst. One factor that simplifies the standard epoxidation reaction is that the active chiral catalyst is generated in situ, which means that the pre-preparation of the active catalyst is not required. 

This new hydrogenation procedure is clean, mild, and effective. It offers a very practical method for chiral alcohol synthesis. Isolated Ru complexes are fairly air and moisture stable and can be stored in an ordinary vial for quite a long time. Compared with the catalysts prepared in situ, the reaction rates in the asymmetric hydrogenations catalyzed by 70 are higher by two orders of magnitude. 

---