Chemical vapor deposition process availability

Sihcon carbide is also a prime candidate material for high temperature fibers (qv). These fibers are produced by three main approaches polymer pyrolysis, chemical vapor deposition (CVD), and sintering. Whereas fiber from the former two approaches are already available as commercial products, the sintered SiC fiber is still under development. Because of its relatively simple process, the sintered a-SiC fiber approach offers the potential of high performance and extreme temperature stabiUty at a relatively low cost. A comparison of the manufacturing methods and properties of various SiC fibers is presented in Table 4 (121,122). 

The approaches used for preparation of inorganic nanomaterials can be divided into two broad categories solution-phase colloidal synthesis and gas-phase synthesis. Metal and semiconductor nanoparticles are usually synthesized via solution-phase colloidal techniques,4,913 whereas high-temperature gas-phase processes like chemical vapor deposition (CVD), pulsed laser deposition (PLD), and vapor transfer are widely used for synthesis of high-quality semiconductor nanowires and carbon nanotubes.6,7 Such division reflects only the current research bias, as promising routes to metallic nanoparticles are also available based on vapor condensation14 and colloidal syntheses of high-quality semiconductor nanowires.15... 

The synthesis processes for the nanotubes have been continuously refined in the recent years and today, a number of methods are available to synthesize both single and multiwalled carbon nanotubes. These methods include high temperature evaporation using arc-discharge (28-30), laser ablation (31), chemical vapor deposition etc. (32-34). 

The polyaromatic mesophase (PA-MP) is a nematic, discotic, chemotropic liquid crystal. Owing to its high density (about 1.5 gcm ), its high carbon yield of about 90 %, and its thermoplasticity, it is unique as a precursor of structure carbons. An important application is the manufacture of high modulus (HM) and ultra-high modulus (UHM) carbon fibers [1]. By alloying with silicon, physical and chemical properties of the materials, such as strength, hardness and oxidation resistance, can be improved. These modified carbons were available by chemical vapor deposition (CVD) processes only up to now. The preparation by liquid phase pyrolysis is novel, economic, and thus opens a completely new field of applications. 

There is little information regarding the surface chemistry involved in the nucleation of amorphous silicon by photo-induced chemical vapor deposition (photo-CVD). The reason seems to be that effective chemical and physical means of detecting a small amount of silicon are hardly available at present. In our laboratory, the initial process of amorphous silicon (a-Si) formation from silanes or disilanes on Si02 substrate by photo-CVD has been studied by a new technique of chemical... 

---