Chemical composition, applications

In this section we arc concerned with the relation between the properties of solids and their crystal structure and/or chemical composition. Applications are sought in the field of inorganic crystalline materials such as zeolites. 

An important application of this type of analysis is in the determination of the calculated cetane index. The procedure is as follows the cetane number is measured using the standard CFR engine method for a large number of gas oil samples covering a wide range of chemical compositions. It was shown that this measured number is a linear combination of chemical family concentrations as determined by the D 2425 method. An example of the correlation obtained is given in Figure 3.3. 

Polymeric flocculants are available in various chemical compositions and molecular weight ranges, and they may be nonionic in character or may have predominantly cationic or anionic charges. The range of application varies but, in general, nonionics are well suited to acidic suspensions, anionic flocculants work well in neutral or alkaline environments, and cationics are most effective on organic material and colloidal matter. 

Occurrence and preparation Chemical composition Properties Applications... 

Diffusion Coating-application of a metallic coating. The chemical composition of the metal is modified by diffusing the coating into the substrate at the metal s melting temperature. 

Welded or seamless tubing manufactured in a large range of sizes of varied chemical compositions (sizes range V16-IO % in. o.d. inclusive for carbon and alloy material) usually not fabricated to meet any specification other than application requirements fabricated to meet exact outside diameter and decimal wall thickness. 

Whereas for organic SEC column technology a particular type of bead (PS/ DVB) is used almost universally, in the field of aqueous SEC there have been a variety of approaches to derive polymeric beads suitable for the application. For this reason there is more secrecy about the chemical composition of the packing materials and columns produced by different manufacturers. 

Because the quality and health aspects of foods cannot be measured by a single index, it necessarily follows that the subject of control methods in the canned food industry is very broad, and includes chemical, physical, organoleptic, and bacteriological tests, only the first of which is discussed here. The measurement of color, odor, optical clarity, texture, viscosity, and chemical composition has been used to evaluate canned foods, but in many cases the methods that are applicable to one product are either not applicable to another, or can be used only after considerable modification. 

The vast increase in the application of membranes has expanded our knowledge of fabrication of various types of membrane, such as organic and inorganic membranes. The inorganic membrane is frequently called a ceramic membrane. To fulfil the need of the market, ceramic membranes represent a distinct class of inorganic membrane. There are a few important parameters involved in ceramic membrane materials, in terms of porous structure, chemical composition and shape of the filter in use. In this research, zirconia-coated y-alumina membranes have been developed using the sol-gel technique. 

Table I shows the chemical composition limits of various aluminum alloys presently used for packaging applications (3). In general, these alloys have good corrosion resistance with most foods. However, almost without exception, processed foods require inside enameled containers to maintain an acceptable shelf life (4, 5). Moreover, when flexible foil packages are used for thermally processed foods, the foil is laminated to plastic materials that protect it from direct contact with the food and also provide heat sealability as well as other physical characteristics (6,7).

The structure theory of inorganic chemistry may be said to have been bom only fifty years ago, when Werner, Nobel Laureate in Chemistry in 1913, found that the chemical composition and properties of complex inorganic substances could be explained by assuming that metal atoms often coordinate about themselves a number of atoms different from their valence, usually four atoms at the comers either of a tetrahedron or of a square coplanar with the central atom, or six atoms at the comers of an octahedron. His ideas about the geometry of inorganic complexes were completely verified twenty years later, through the application of the technique of x-ray diffraction. 

Development of several new siloxane-imide copolymers for commercial applications have also been reported by Lee 181) and Berger58). Although no information was given in terms of the chemical compositions of these materials, most of these polymers were reported to be processable by solution or melt processing techniques, most probably due to their high siloxane contents. However, due to the presence of low (—20 to —120 °C) and high (>230 °C) temperature Tg s, it was clear that multiphase copolymers have been synthesized. Molecular weights and thermal stabilities, etc, were not reported. 

The properties of a polymer depend not only on its gross chemical composition but also on its molecular weight distribution, copolymer composition distribution, branch length distribution, and so on. The same monomer(s) can be converted to widely differing polymers depending on the polymerization mechanism and reactor type. This is an example of product by process, and no single product is best for all applications. Thus, there are several commercial varieties each of polyethylene, polystyrene, and polyvinyl chloride that are made by distinctly different processes. 

In nanotechnology, dimensions of interest are shrinking from the fiva to the nm range. For many microelectronic devices, such as laterally structured surfaces, particles, sensors, their physical as well as their chemical properties are decisively determined by their chemical composition. Its knowledge is mandatory for understanding their behavior, as well as for their successful and reliable technical application. This presents a challenge for TOF-SIMS, because of its demand for the unique combination of spatial resolution and sensitivity. 

The lipid molecule is the main constituent of biological cell membranes. In aqueous solutions amphiphilic lipid molecules form self-assembled structures such as bilayer vesicles, inverse hexagonal and multi-lamellar patterns, and so on. Among these lipid assemblies, construction of the lipid bilayer on a solid substrate has long attracted much attention due to the many possibilities it presents for scientific and practical applications [4]. Use of an artificial lipid bilayer often gives insight into important aspects ofbiological cell membranes [5-7]. The wealth of functionality of this artificial structure is the result of its own chemical and physical properties, for example, two-dimensional fluidity, bio-compatibility, elasticity, and rich chemical composition. 

The combination of physical and chemical characteristics of nodules make impossible the application of methods of physical beneficiation such as flotation and magnetic separation to produce concentrates of valuable metals, and so chemical processing must be used. Their processing also tends to be much more energy-intensive, vis-a-vis that of conventional land-based ores. Deep-sea manganese nodules are quite unlike any terrestrial ores, both with respect to their physical characteristics and to their mineralogical and chemical compositions new processes are, therefore, required. 

---