Charging automatic

The electrical control system is powered by means of 24-V batteries which are charged automatically from a rectified a.c. supply. All the control devices are located beyond the safety wall. The separator is monitored by a closed circuit television system. 

Multivariate data analysis usually starts with generating a set of spectra and the corresponding chemical structures as a result of a spectrum similarity search in a spectrum database. The peak data are transformed into a set of spectral features and the chemical structures are encoded into molecular descriptors [80]. A spectral feature is a property that can be automatically computed from a mass spectrum. Typical spectral features are the peak intensity at a particular mass/charge value, or logarithmic intensity ratios. The goal of transformation of peak data into spectral features is to obtain descriptors of spectral properties that are more suitable than the original peak list data. 

The vacustat f (Fig. 11,23,2) is another useful gauge it covers the range 10 to 0 01 mm. of mercury and is usually employed in conjunction with an oil pump. It is direct reading, compact, and is charged with only about 8 ml. of mercury. The gauge must be swivelled to the vertical position when a reading of the pressure is required it does not automatically record a variable pressure. 

The properties available include electrostatic charges, multipoles, polarizabilities, hyperpolarizabilities, and several population analysis schemes. Frequency correction factors can be applied automatically to computed vibrational frequencies. IR intensities may be computed along with frequency calculations. 

It is recommended that the convention used by Budzikiewicz, Djerassi, and Williams (Mass Spectrometry of Organic Compounds, Holden-Day, 1967, p. 2) be followed in referring to a-cleavage as fission of a bond originating at an atom which is adjacent to the one assumed to bear the charge the definition of p-, y-, then follows automatically. The process ... 

The furnace charge consists of 2iac—lead siater, metallurgical coke, and recirculating metallic drosses and flux. The charge cycle is fully automatic. Hoist... 

After pressure appHcation, the top punch is removed and the compact is ejected from the cavity by the bottom punch. The cavity is then refilled and is ready for another charge. This cycle is repeated automatically at a rate that varies with the part and size and the complexity and dowabiUty of the powder. Pressing equipment producing relatively small, simple parts can operate at up to 200 parts/min. Rotary presses with multiple die sets are even faster. Table 5 gives the ranges of pressures used for various materials during die compaction. 

Solvent Process. In the solvent process, or solvent cook, water formed from the reaction is removed from the reactor as an a2eotropic mixture with an added solvent, typically xylene. Usually between 3 to 10 wt % of the solvent, based on the total charge, is added at the beginning of the esterification step. The mixed vapor passes through a condenser. The condensed water and solvent have low solubiUty in each other and phase separation is allowed to occur in an automatic decanter. The water is removed, usually to a measuring vessel. The amount of water collected can be monitored as one of the indicators of the extent of the reaction. The solvent is continuously returned to the reactor to be recycled. Typical equipment for this process is shown in Figure 2. The reactor temperature is modulated by the amount and type of refluxing solvent. Typical conditions are ... 

An acid egg, or blowcase, consists of an egg-shaped container which can be filled with a charge of liquid that is to be pumped. This container is fitted with an inlet pipe for the charge, an outlet pipe for the discharge, and a pipe for the admission of compressed air or gas, as illustrated in Fig. 10-58. Pressure of air or gas on the surface of the liquid forces it out of the discharge pipe. Such pumps can be hand-operated or arranged for semiautomatic or automatic operation. 

The pusher-type furnace is relatively free from mechanical problems because all mechanical parts are located outside the hot zone. It employs a roller-conveyor usually and will handle charges weighing considerably more per square meter than a belt-conveyor furnace. Pushers are driven by electric motors, compressed air, or hydraulic systems and can be automatically timed and synchronized with door-... 

Features common to most high-voltage dc powder supplies include rev ersible polaritv, short-circuit and current-limiting protection, and automatic residual-charge dissipation to ground. 

Flue-fed Particulates, smoke, and combustion Use of charging gates and automatic... 

Electrostatic method This is also a w et method like the conventional process, except that the paint is now electrostatically charged, similar to the powder ptiint in a dry method as discussed later. The paint, being highly charged electrostatically, is wrapped around the object automatically. 

As an energized capacitor retains its charge, even after a disconnection and causes a voltage transient on a reswitching, it is recommended that its circuit be closed only through a contactor or a breaker, with an undervoltage release. So that in the event of a power failure, the circuit will interrupt automatically... 

---