Characteristic data tables

Table 10.13 provides some characteristic data relative to the steam cracking process. 

Table 7. Characteristic Data of Electric Plasma Processes ...

In general, every material safety data sheet should provide the local emergency plamiing committee and tlie fire department in each conmiunity with tlie name of tlie chemical covered, as well as such general characteristics (see Table 2.6.4) as ... 

Characteristic data for polyethylene separators in comparison with competing systems are discussed later in this section (Table 11). 

The automated pesticide runoff model consists of a set of FORTRAN programs which calculate the amount of pesticide runoff from input of river basin data, rainfall data, pesticide characteristics, and application data. Table I shows the input requirements for the SWRRB model. Table II shows the output data from the SWRBB model. 

Interpreting Data Metals are usually malleable and good conductors of electricity. They are generally lustrous and silver or white in color. Many react with acids. Write the word metal beneath the Classification heading in the data table for those element samples that display the general characteristics of metals. 

Ultimately, the catalyst performance of a real fuel cell is of the greatest importance. The DEFC polarization curves for the two PtSn anode catalysts are tested and shown in Fig. 15.9. The characteristic data are summarized in Table 15.4. The PtSn-1 catalyst shows a strongly enhanced electron-oxidation reaction (EOR) activity and much better performance in both the activation-controlled region (low-current density region) and... 

In conclusion, simulated and measured values are in good agreement, and the achieved accuracy is sufficient for system-level simulations. The experimental results for the characteristic data of a circular microhotplate design are listed in Table 4.3. 

Table 4.3. Characteristic data of a circular microhotplate design...

Note on the use of data tables. Tabulated data typically give characteristic absorptions or chemical shifts for representative compounds and these may not correlate exactly with those from an unknown compound. The data contained in data tables should always be used indicatively (not mechanically). 

Table 5.1 Characteristic data derived from low temperature N2 isotherms, from He pycnometry and from SAXS for the two samples studied...

In this box we demonstrate the construction and application of a simple one-box model to a small lake like Greifensee to analyze the dynamic behavior of a chemical such as PCE. Characteristic data of Greifensee are given in Table 21.1. Measurements of PCE in the water column of the lake yield the following information ... 

Table 233 Characteristic Data of Lake Superior (North America)0...

Let us demonstrate the power of the one-box lake model by analyzing the fate of two different polychlorinated biphenyl congeners (PCBs) in Lake Superior (North America). Characteristic data of the lake are given in Table 23.3. 

The characteristic data describing the lake are summarized in the following table. Note that the physicochemical properties of PCB185 can be found in Table 23.4. 

Table 24.5 Characteristic Data of Chemical Tracers Used for the Gas Exchange Experiment Nondimensional Henry s Law Constant, Ki3/vi, Molecular Diffusion Coefficient in Air, Dia, and Water, Diw, Octanol-Water Partition Coefficient, Kiow, All valid for 4°C (Data from Cirpka et al., 1993)...

Table 1 of Chapter 16.1 shows the known transition metal thioanions with a d° configuration of the central atom together with some characteristic data. 

Table 4.6 summarises some characteristic data of such polymerizations. 

Analysis of Stress—Optical Data. The slight, if indeed real, improvement of the isotropic model over the Takayanagi model would be of little consequence were it not for a more pronounced difference between the two models in their ability to describe the stress-optical data. When the parameters obtained from the dynamic data (Table IV) are substituted into Equations 8 and 9, Equation 8 produces results which are uniformly too low. Equation 9 also underestimates the magnitude of Ka but only by an average 7% (Figure 14). For most blends the discrepancy is less than 5%, and all calculated values show the characteristic elevation of the birefringence attributed to the multiphase structure. 

---