Center of Material Sciences and Engineering

Professor John B. Goodenough, Center of Materials Science and Engineering, University of Texas at Austin, Austin, Texas 78712, U.S.A. 

Department of Electrical Engineering and Computer Science, Center for Material Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139... 

International Research Center of Macromolecular Science, Tokyo Institute of Technology, Ookayama, Meguro-ku, Tokyo, Japan Department of Materials Science and Engineering, Shonan Institute of Technology, Tsujido Nishikaigan, Fujisawa-shi, Kanagawa, Japan... 

Department of Materials Science and Engineering and Engineering Research Center for Particle Science and Technology, University of Florida, Gainesville, FL 32611... 

Yasunori Fujimoto (229), Department of Materials Science and Engineering, Waseda University, 3-4-1 Ohkubo, Shinjuku-ku, Tokyo 169-8555, Japan Kimichika Fukushima (255), Power and Industrial Systems R D Center, Toshiba Corporation, 4-1 Ukishima-cho, Kawasaki-ku, Kawasaki 210, Japan Masaru Hirata (325, 335, 353), Department of Materials Science, Japan Atomic Energy Research Institute, Tokai-mura, Naka-gun, Ibaraki 319-1195, Japan... 

The authors gratefully acknowledge Dr. Philip Manos (E. I. du Pont de Nemours Co.) for the preparation of 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane (BDAF). The parallel plate capacitor micro test structure fabrication was performed in die Microsystems Technology Laboratories and the Microelectronics Laboratory of the Center for Materials Science and Engineering (MIT), which is supported in part by the National Science Foundation under Contract DMR-84-18718. 

This work was supported by Seed Funds from the Stanford Center for Integrated Systems. The authors thank Ford Motor Company for use of the fluorescence microscope and imaging system, and Professor C.W. Bates, Stanford Dept, of Materials Science and Engineering, for use of the Solartron frequency response analyzer. 

X-Ray Imaging Center Department of Materials Science and Engineering... 

Department of Materials Science and Engineering and The Particulate Materials Center, The Pennsylvania State University, University Park, PA 16802... 

This work has been supported by Faculty of Engineering and Industrial Technology, Silpakom university. The authors also wish to thank Department of Materials Science and Engineering, Silpakom university to provide equipment and some of materials for this investigation and National Center of Excellence for Petroleum, Petrochemicals and Advanced Materials for supporting and encouraging this investigation. 

Department of Materials Science and Engineering, Joint Institute for Surface and Microstructure Research, Stanford University/NASA-Ames Research Center, Stanford, CA 94305... 

Department of Materials, Science, and Engineering and the Particulate Materials Center Pennsylvania State University University Park, Pennsylvania... 

Department of Physics and Center for Materials Science and Engineering Massachusetts Institute of Technology Cambridge, MA 02139, USA... 

Matthew D. Harmon Department of Orthopaedic Surgery, Department of Material Science and Engineering, Institute for Regenerative Engineering, Raymond and Beverly Sadder Center for Biomedical, Biological, Physical and Engineering Sciences, The University of Connecticut, Farmington, CT, USA... 

---