Cement foams

Use Plasticizer for nitrocellulose, rubber cements, foam suppressant. 

Arazate . [Uniroyal] Zinc dibenzyl di-thiocarbamate accelerata for NR, SBR, latexes, cements, foam. 

Polyurethane (PU) Diisocyanate and hydroxyl-functionahsed ohgomer (polyol) Coating, adhesive, encapsulating materials, acid-resistant cements, foams, adhesives... 

Uses Foaming agent for toiletries primary emulsifer for latex prod. cement foaming agent Features Mild Properties Liq. 35% cone. 

Granulated polystyrene foam has been used as an additive ia lightweight cement or as a soil additive to retaia moisture and minimize compaction... 

Other fibrous and porous materials used for sound-absorbing treatments include wood, cellulose, and metal fibers foamed gypsum or Pordand cement combined with other materials and sintered metals. Wood fibers can be combined with binders and dame-retardent chemicals. Metal fibers and sintered metals can be manufactured with finely controlled physical properties. They usually are made for appHcations involving severe chemical or physical environments, although some sintered metal materials have found their way into architectural appHcations. Prior to concerns regarding its carcinogenic properties, asbestos fiber had been used extensively in spray-on acoustical treatments. 

Cyclopentadiene oligomers have been formed by vapor deposition of CPD on kaolin to afford a sorbant for removal of oil from water (71). They are also employed as coatings for controlling release rates of fertilizers (72). Thermal addition of sulfur to a mixture of DCPD and CPD oligomers has led to a number of beneficial appHcations such as waste water oil adsorbant powdery foams (73), plasticized backing for carpets and artificial turfs (74), and in modified sulfur cements for encapsulating low-level radioactive wastes (75). 

Available forms. Blanket (felt and batt), block, cements, loose fiU, foil and sheet, formed or foamed in place, flexible, rigid, and semirigid. 

The main uses of toluene are as a solvent in paints, rubber, and plastic cements and as a feedstock in the manufacture of organic chemicals, explosives, detergents, and polyurethane foams. Xylenes (which exist as three isomers) are used in the manufacture of DMT, alkyd resins, and plasticizers. Naphthalene is mainly used in the manufacture of dyes, pharmaceuticals, insect repellents, and phthalic anhydride (used in the manufacture of alkyd resins, plasticizers, and polyester). 

Poljmrethane Foam Association (PFA), 272 Poljnjretliane Manufacturers Association (PMA), 272 POPCORN , sulfur, 108 Portland cement, 108 Portland stone, 109... 

Salts of a-sulfo fatty acid esters can work as emulsifying agents for the preparation of asphalt emulsions and asphalt-latex emulsions. The ester sulfonates improve the storage stability of the emulsions [101,102]. In the manufacture of lightweight gypsum products air bubbles have to be mixed into the slurries. The use of salts of sulfonated C10 l8 fatty acid alkyl esters as foaming agents produces uniformly distributed fine bubbles [103]. Salts of C10 16 fatty acid alkyl ester sulfonates can also be added to cement mixtures to prevent slump loss of the mixtures [104]. 

A furnace slag cement slurry can have a density of 1500 to 1600 kg/m. A combination of silica flour and furnace slag may be used to achieve service temperatures exceeding 200° C [670]. A gas may be suitable as a foaming agent [358]. 

Foam cement is a special class of lightweight cement. The gas content of foamed cement can be up to 75% by volume. The stability of the foam is achieved by the addition of surfactants, as shown in Table 10-9. A typical foamed cement composition is made from a hydraulic cement, an aqueous rubber latex in an amount up to 45% by weight of the hydraulic cement, a latex stabilizer, a defoaming agent, a gas, a foaming agent, and a foam stabilizer [359,362]. Foamed high-temperature applications are based on calcium phosphate cement [257]. 

Defoamers are used in oil extraction, such as in drilling muds and cementation, and also directly with crude oil itself. In its natural state, a crude oil contains dissolved gases at the pressure of the reservoir. When the pressure is reduced, the gases are liberated and troublesome foam can develop. There are three ways to prevent foaming in gas-oil separation ... 

D. L. Bout and J. D. Childs. Foamed well cementing compositions and methods. Patent US 5133409, 1992. 

Foamed cement slurries have been used to provide a low density cement slurry to reduce permeability damage to highly sensitive formations through reduced fluid loss (29). Glass microspheres have also been used to substantially reduce cement slurry density (30, 31). Other additives which reduce cement slurry density to a lesser extent include bentonite, fly ash, silicates, perlite, gilsonite, diatomaceous earth, and oil emulsions (see citations in reference 29). 

The thermal insulation materials used in the walls, ceilings, and floors of refrigerated storage are usually combustible, such as polyurethane and polystyrene foam, and could present an additional fire hazard. The insulation should be covered with a noncombustible barrier material a V2-in (1.3-cm) thickness of Type-X gypsum board or cement plaster is often used for this purpose. Where the floor is insulated, the floor insulation should be covered with a layer of concrete. 

---