Etherification cellulose

Cellulose Etherification with chloro-acetic acid (carboxymethylation) Carboxymethyl cellulose 5-6 HW 2042 K 1521... 

Treatments based on condensation reactions (such as in the classical Williamson synthesis) produce the most stable cotton derivatives. On the other hand, treatments based on addition reactions (such as in the Michael reaction) yield cellulose ethers that are somewhat less stable. This lower level of stability is because of the equilibrium nature of the addition reaction. Typical examples of these two types of cellulose etherification are carboxymethyla-tion [9,329,330] and cyanoethylation [9,329,330,332], respectively, both of which proceed in the presence of alkali. 

A typical cellulose etherification involving Michael additiOTi of an activated C=C bond of acrylonitrile (AN) to a partially anionized cellulosic hydroxyls in an aqueous alkaline medium represented below was employed. 

Cellulosics. CeUulosic adhesives are obtained by modification of cellulose [9004-34-6] (qv) which comes from cotton linters and wood pulp. Cellulose can be nitrated to provide cellulose nitrate [9004-70-0] which is soluble in organic solvents. When cellulose nitrate is dissolved in amyl acetate [628-63-7] for example, a general purpose solvent-based adhesive which is both waterproof and flexible is formed. Cellulose esterification leads to materials such as cellulose acetate [9004-35-7], which has been used as a pressure-sensitive adhesive tape backing. Cellulose can also be ethoxylated, providing hydroxyethylceUulose which is useful as a thickening agent for poly(vinyl acetate) emulsion adhesives. Etherification leads to materials such as methylceUulose [9004-67-5] which are soluble in water and can be modified with glyceral [56-81-5] to produce adhesives used as wallpaper paste (see Cellulose esters Cellulose ethers). 

Etherification. Carbohydrates are involved in ether formation, both intramoleculady and intermoleculady (1,13). The cycHc ether, 1,4-sorbitan, an 1,4-anhydroalditol, has already been mentioned. 3,6-Anhydro-a-D-galactopyranosyl units are principal monomer units of the carrageenans. Methyl, ethyl, carboxymethyl, hydroxyethyl, and hydroxypropyl ethers of cellulose (qv) are all commercial materials. The principal starch ethers are the hydroxyethyl and hydroxypropylethers (see Cellulose ethers Starch). 

Every polysaccharide contains glycosyl units with unsubstituted hydroxyl groups available for esterification or etherification. Polysaccharide derivatives are described by their degree of substitution (DS), which is the average number of substituent groups per glycosyl unit. Because each monomeric unit of cellulose molecules has free hydroxyl groups at C-2, C-3, and C-6, the maximum DS for cellulose, and all polysaccharides composed exclusively of neutral hexosyl units, the majority of polysaccharides, is 3.0. 

Several derivatives of cellulose, including cellulose acetate, can be prepared in solution in dimethylacetamide—lithium chloride (65). Reportedly, this combination does not react with the hydroxy groups, thus leaving them free for esterification or etherification reactions. In another homogeneous-solution method, cellulose is treated with dinitrogen tetroxide in DMF to form the soluble cellulose nitrite ester this is then ester-interchanged with acetic anhydride (66). With pyridine as the catalyst, this method yields cellulose acetate with DS < 2.0. 

Etherification. The accessible, available hydroxyl groups on the 2, 3, and 6 positions of the anhydroglucose residue are quite reactive (40) and provide sites for much of the current modification of cotton ceUulose to impart special or value-added properties. The two most common classes into which modifications fall include etherification and esterification of the cotton ceUulose hydroxyls as weU as addition reactions with certain unsaturated compounds to produce ceUulose ethers (see Cellulose, ethers). One large class of ceUulose-reactive dyestuffs in commercial use attaches to the ceUulose through an alkaH-catalyzed etherification by nucleophilic attack of the chlorotriazine moiety of the dyestuff ... 

Water RepeUency. The development of water-repellent cellulose ethers has been reviewed (55) (see Waterproofing). A typical example of a commercial etherification for waterproofing cotton is with stearamidomethylpyridinium chloride ... 

The molecular weight may be regulated by controlled degradation of the alkali cellulose in the presence of air. This can be done either before or during etherification. The molecular weight of commercial grades is usually expressed indirectly as viscosity of a 5% solution in an 80 20 toluene-ethanol mixture. 

Recently, use of LiCl/DMAc and LiCl/l,3-dimethyl-2-imidazolidinone as solvent systems for acetylation of cellulose by acetic anhydride/pyridine has been compared. A DS of 1.4 was obtained the substituent distribution in the products synthesized in both solvents was found to be the same, with reactivity order Ce > C2 > C3. Therefore, the latter solvent system does not appear to be better than the much less expensive LiCl/DMAc, at least for this reaction. It appears, however, to be especially efficient for etherification reactions [178]. It is possible, however, that the effect of cellulose aggregation is more important for its reaction with the (less reactive) halides than with acid anhydrides this being the reason for the better performance of the latter solvent system in ether formation, since it is more efficient in cellulose dissolution. 

V. Chemistry op the Etherification 1. Influence of the Colloidal Nature of the Cellulose... 

Two of the hydroxyl groups present in each glucose unit of the cellulose are secondary, one is primary. Studies on the relative rates of etherification of the three hydroxyls are not conclusive. Mahoney and Purves,18 using a method which takes advantage of the rapid reaction between tosyl chloride and a primary hydroxyl, combined with a determination of unsubstituted glycol groups, have studied the relative num-... 

The hydroxyl groups of the cellulose appear to be somewhat acidic. While studies of the composition of alkali cellulose and adsorption of sodium hydroxide have not clearly proved the presence of any sodium compound in alkali cellulose, the reactions of alkali cellulose with carbon disulfide and with etherifying agents would seem to justify the assumption that such an intermediate exists or that the hydroxyl hydrogen at least ionizes. This view is strengthened by the fact that the rate of etherification is proportional to a high power of the concentration of alkali.19... 

Most of the selective-etherification studies on polysaccharides have been made with cellulose, and nearly all of them have involved quantitative separation of the D-glucose derivatives formed on hydrolysis of the partially substituted celluloses. In view of their stability, ethers of polysaccharides are particularly suited to this approach. 

---