Cation polymer

The size-exclusion and ion-exchange properties of zeoHtes have been exploited to cause electroactive species to align at a zeoHte—water interface (233—235). The zeoHte thus acts as a template for the self-organization of electron transfer (ET) chains that may find function as biomimetic photosynthetic systems, current rectifiers, and photodiodes. An example is the three subunit ET chain comprising Fe(CN)g anion (which is charge-excluded from the anionic zeoHte pore stmcture), Os(bipyridine)3 (which is an interfacial cation due to size exclusion of the bipyridine ligand), and an intrazeoHte cation (trimethylamino)methylferrocene (F J ). A cationic polymer bound to the (CN) anion holds the self-assembled stmcture at an... 

The protonated form of poly(vinyl amine) (PVAm—HCl) has two advantages over many cationic polymers high cationic charge densities are possible and the pendent primary amines have high reactivity. It has been appHed in water treatment, paper making, and textiles (qv). The protonated forms modified with low molecular weight aldehydes are usehil as fines and filler retention agents and are in use with recycled fibers. As with all new products, unexpected appHcations, such as in clear antiperspirants, have been found. It is usehil in many metal complexation appHcations (49). 

Solid Polymer. Completely dry polyacrylamide is a brittle white soHd. Commercially available dry polyacrylamide powders are typically dried under mild conditions and usually contain 5—15% water. The powders are hygroscopic, and generally become increasingly hygroscopic as the ionic character of the polymer increases. Cationic polymers are particularly hygroscopic. 

Acrylamide copolymers are effective iron ore pellet binders (118). When the ore slurry in water has a pH above 8, anionic polymers are effective. If the ore is acid washed to remove manganese, then a cationic polymer is effective. 

If either dry powders or inverse emulsions are not properly mixed with water, large lumps of polymer form that do not dissolve. This not only wastes material, but can also cause downstream problems. This is especially tme for paper where visible defects may be formed. Specialized equipment for dissolving both dry polymers and inverse emulsions on a continuous basis is available (22,23). Some care must be taken with regard to water quaUty when dissolving polyacrylamides. Anionic polymers can degrade rapidly in the presence of ferrous ion sometimes present in well water (24). Some cationic polymers can lose charge by hydrolysis at high pH (25). 

Fig. 3. Adsorbed cationic polymer forming charge patch on particle surface (32).

In the area of municipal and iadustrial wastewater treatment, the principal environmental issue is the toxicity of residual flocculating agents ia the effluent. Laboratory studies have shown that cationic polymers are toxic to fish because of the iateraction of these polymers with giU. membranes. Nonionic and anionic polymers show no toxicity (82,83). Other studies have shown that ia natural systems the suspended inorganic matter and humic substances substantially reduce the toxicity of added cationic polymer, and the polymers have been used successfully ia fish hatcheries (84—86). Based on these results, the EPA has added a protocol for testing these polymers for toxicity toward fish ia the presence of humic acids (87). The addition of anionic polymers to effluent streams containing cationic polymers to reduce their toxicity has been mentioned ia the patent Hterature (83). 

Many different types of foaming agents are used, but nonionic surfactants are the most common, eg, ethoxylated fatty alcohols, fatty acid alkanolamides, fatty amine oxides, nonylphenol ethoxylates, and octylphenol ethoxylates, to name a few (see Alkylphenols). Anionic surfactants can be used, but with caution, due to potential complexing with cationic polymers commonly used in mousses. 

The reaction product of sahcylaldehyde and hydroxylamine, sahcylaldoxime, has been found to be effective in photography in the prevention of fogging of silver hahde emulsions on copper supports (96). It also forms the basis for an electrolytic facsimile-recording paper (97) and in combination with a cationic polymer, is used in another electrolytic dry-recording process (98) (see Electrophotography). 

Low molecular cationic polymers or alum can also be used to flocculate pitch, ie, bind up the pitch so that it is retained in the sheet, to minimize pitch deposition on machine surfaces and fabrics (35,36). Alum is used commonly in newsprint operations (34). The addition of a nonionic surfactant with a hydrocarbon solvent to the wet end has shown some utility in preventing deposits of adhesive recycled furnish contaminants from forming on the paper... 

Cationic samples can be adsorbed on the resin by electrostatic interaction. If the polymer is strongly cationic, a fairly high salt concentration is required to prevent ionic interactions. Figure 4.18 demonstrates the effect of increasing sodium nitrate concentration on peak shapes for a cationic polymer, DEAE-dextran. A mobile phase of 0.5 M acetic acid with 0.3 M Na2S04 can also be used. 

When cationic polymers are run on SynChropak CATSEC columns, the calibration curves, as shown in Fig. 10.4, are not identical to those produced... 

---