Cathode, electrochemical cell

The Daniell cell illustrates the basic features of an electrochemical cell. Electrochemical cells always involve a redox reaction. Oxidation occurs at the cathode of the cell and reduction takes place at the anode. Electrons always flow from the anode to the cathode. Electrochemical cells come in many arrangements. To gain an appreciation for the variety of electrochemical cells, consider all the types of batteries available. 

Carbon-13 NMR, 529-531 Carrier gas, GC, 790,795 Carriers, majority, 26,44,45,47 Catalysts, determination of, 382 Cathode, electrochemical cell,... 

The concept of the reversed fuel cell, as shown schematically, consists of two parts. One is the already discussed direct oxidation fuel cell. The other consists of an electrochemical cell consisting of a membrane electrode assembly where the anode comprises Pt/C (or related) catalysts and the cathode, various metal catalysts on carbon. The membrane used is the new proton-conducting PEM-type membrane we developed, which minimizes crossover. 

A gravimetric method in which the signal is the mass of an electrodeposit on the cathode or anode in an electrochemical cell. 

In electrogravimetry the analyte is deposited as a solid film on one electrode in an electrochemical cell. The oxidation of Pb +, and its deposition as Pb02 on a Pt anode is one example of electrogravimetry. Reduction also may be used in electrogravimetry. The electrodeposition of Cu on a Pt cathode, for example, provides a direct analysis for Cu +. 

Also, by convention, potentiometric electrochemical cells are defined such that the indicator electrode is the cathode (right half-cell) and the reference electrode is the anode (left half-cell). 

Shorthand Notation for Electrochemical Cells Although Figure 11.5 provides a useful picture of an electrochemical cell, it does not provide a convenient representation. A more useful representation is a shorthand, or schematic, notation that uses symbols to indicate the different phases present in the electrochemical cell, as well as the composition of each phase. A vertical slash ( ) indicates a phase boundary where a potential develops, and a comma (,) separates species in the same phase, or two phases where no potential develops. Shorthand cell notations begin with the anode and continue to the cathode. The electrochemical cell in Figure 11.5, for example, is described in shorthand notation as... 

What are the anodic, cathodic, and overall reactions responsible for the potential in the electrochemical cell shown here Write the shorthand notation for the electrochemical cell. 

Equations 11.19-11.21 are defined for a potentiometric electrochemical cell in which the pH electrode is the cathode. In this case an increase in pH decreases the cell potential. Many pH meters are designed with the pH electrode as the anode so that an increase in pH increases the cell potential. The operational definition of pH then becomes... 

Reduction of Fe + to Fe + occurs at the working electrode, making it the cathode in the electrochemical cell. 

Identify the anode and cathode for the following electrochemical cells, and write the oxidation or reduction reaction occurring at each electrode. 

Ethylene glycol can be produced by an electrohydrodimerization of formaldehyde (16). The process has a number of variables necessary for optimum current efficiency including pH, electrolyte, temperature, methanol concentration, electrode materials, and cell design. Other methods include production of valuable oxidized materials at the electrochemical cell s anode simultaneous with formation of glycol at the cathode (17). The compound formed at the anode maybe used for commercial value direcdy, or coupled as an oxidant in a separate process. 

These reactions can be carried out at room temperature. Hydrogen gas can also be produced on a laboratory scale by the electrolysis of an aqueous solution. Production of hydrogen through electrolysis is also used industrially. This involves the following reaction at the cathode of the electrochemical cell ... 

A Perkin-Elmer 5000 AAS was used, with an electrically heated quartz tube atomizer. The electrolyte is continuously conveyed by peristaltic pump. The sample solution is introduced into the loop and transported to the electrochemical cell. A constant current is applied to the electrolytic cell. The gaseous reaction products, hydrides and hydrogen, fonued at the cathode, are flowed out of the cell with the carrier stream of argon and separated from the solution in a gas-liquid separator. The hydrides are transported to an electrically heated quartz tube with argon and determined under operating conditions for hydride fonuing elements by AAS. 

There are two principal methods of applying cathodic protection, viz. the impressed current technique and the use of sacrificial anodes. The former includes the structure as part of a driven electrochemical cell and the latter includes the structure as part of a spontaneous galvanic cell. 

Half-cell one half of an electrochemical cell, comprising one electrode (anode or cathode) and its immediate electrolyte (anolyte or catholyte). 

In an electrochemical cell, these two half-reactions occur at two different electrodes, which most often consist of metal plates or wires. Reduction occurs at the cathode a typical half-reaction might be... 

It is always true that in an electrochemical cell, anions move to the anode cations move to the cathode. 

The corrosion of steel or other metals in a boiler plant system takes place when an electrochemical cell is established. This occurs when two different metals (anode and cathode) are coupled together in water, which acts as the electrolyte in any steam-water circuit. 

In an electrochemical cell, electrical work is obtained from an oxidation-reduction reaction. For example, consider the process that occurs during the discharge of the lead storage battery (cell). Figure 9.3 shows a schematic drawing of this cell. One of the electrodes (anode)q is Pb metal and the other (cathode) is Pb02 coated on a conducting metal (Pb is usually used). The two electrodes are immersed in an aqueous sulfuric acid solution. 

Measurement of E° and Activities Electrochemical cells can be constructed to measure E° and thermodynamic properties such as K, AG, AH, AS, A V, and ACP for a reaction. Consider as an example the cell shown schematically in Figure 9.4.x The cathode consists of an Ag metal rod coated with AgCl(s). The anode is a Pt metal rod around which H2(g) is bubbled. The two electrodes are... 

The electrochemical cell consists of high surface area Pd/C or unsupported Pd-Ru cathodes interfaced to Nafion with a Pt-black/H2 counter electrode. The cell configuration, as well as the reactions taking place on the anode and the cathode are the following ... 

The ammonium polysulfide, (NH4)2SX (with x=2 to 6) is produced in an electrochemical cell where aqueous ammonium sulfide, (NH4)2S, solution is supplied as electrolyte. The cell comprises an anode and a gas diffusion carbon cathode over which gaseous 02 is supplied in contact with the electrolyte.11 The cell operated continuously at pressures up to 60 bar. The applied potential, UWc> was 0.01 to 5 V. Pronounced electrochemical promotion behaviour was observed at Uwc values as low as 0.02 V with a current 1=0.5 A. 

Oscillatory reactions carbon monoxide oxidation, 388 electrochemical promotion of, 389 Overpotential activation, 124 anodic, 122 cathodic, 122 cell, 123... 

FIGURE 12.2 In an electrochemical cell, J a reaction takes place in two separate 2" regions. Oxidation takes place at one 3 electrode (the antxle), and the electrons released travel through the external circuit to the other electrode, the cathode, where they cause reduction. The circuit is completed by ions, which carry the electric charge through the solution. 

An electrochemical cell in which electrolysis takes place is called an electrolytic cell. The arrangement of components in electrolytic cells is different from that in galvanic cells. Typically, the two electrodes share the same compartment, there is only one electrolyte, and concentrations and pressures are far front standard. As in all electrochemical cells, the current is carried through the electrolyte by the ions present. For example, when copper metal is refined electrolytically, the anode is impure copper, the cathode is pure copper, and the electrolyte is an aqueous solution of CuS04. As the Cu2f ions in solution are reduced and deposited as Cu atoms at the cathode, more Cu2+ ions migrate toward the cathode to take their place, and in turn their concentration is restored by Cu2+ produced by oxidation of copper metal at the anode. 

Basol BB (1988) Electrodeposited CdTe and HgCdTe solar Cells. Sol Cells 23 69-88 Bhattacharya RN, Rajeshwar K, Noufi RN (1985) In situ preparation of p-Type CdTe thin films by cathodic electrodeposition. J Electrochem Soc 132 732-734 Llabres J (1984) In situ preparation of undoped p-Type CdTe by cathodic electrochemical deposition. J Electrochem Soc 131 464 65... 

---