Catalytical palladium complexes

Recently it has been shown by Chikashita et al. that hydride transfer is possible from the benzimida-zoline (21) to an acyl chloride, giving the corresponding aldehyde and benzimidazolium salt (22 equation 1) The reaction is most effective in the presence of 1 mol equiv. of acetic acid. Although it has only been used for a few aldehydes, it is successful with aromatic and aliphatic examples (e.g. p-nit-robenzaldehyde, 82% g.c. yield cyclohexanecarbaldehyde, 80% g.c. yield) and may have substantial potential. Another new method is the treatment of aroyl chlorides with dialkylzinc reagents in the presence of catalytic palladium complexes. However, the applicability would seem to be limited by the rather low yields. 

Acetyl chlotide is reduced by vatious organometaUic compounds, eg, LiAlH (18). / fZ-Butyl alcohol lessens the activity of LiAlH to form lithium tti-/-butoxyalumium hydtide [17476-04-9] C22H2gA102Li, which can convert acetyl chlotide to acetaldehyde [75-07-0] (19). Triphenyl tin hydtide also reduces acetyl chlotide (20). Acetyl chlotide in the presence of Pt(II) or Rh(I) complexes, can cleave tetrahydrofuran [109-99-9] C HgO, to form chlorobutyl acetate [13398-04-4] in about 72% yield (21). Although catalytic hydrogenation of acetyl chlotide in the Rosenmund reaction is not very satisfactory, it is catalyticaHy possible to reduce acetic anhydride to ethylidene diacetate [542-10-9] in the presence of acetyl chlotide over palladium complexes (22). Rhodium trichloride, methyl iodide, and ttiphenylphosphine combine into a complex that is active in reducing acetyl chlotide (23). 

Succinic anhydride is manufactured by catalytic hydrogenation of maleic anhydride [108-31-6]. In the most widely used commercial process this reaction is performed in the Hquid phase, at temperatures of 120—180°C and at moderate pressures, in the range of 500—4000 kPa (72—580 psi). Catalysts mentioned in the patent Hterature include nickel (124), Raney nickel (125,126), palladium on different carriers (127,128), and palladium complexes (129). The hydrogenation of the double bond is exothermic Ai/ = —133.89 kJ/mol (—32 kcal/mol) (130). 

The original Sonogashira reaction uses copper(l) iodide as a co-catalyst, which converts the alkyne in situ into a copper acetylide. In a subsequent transmeta-lation reaction, the copper is replaced by the palladium complex. The reaction mechanism, with respect to the catalytic cycle, largely corresponds to the Heck reaction.Besides the usual aryl and vinyl halides, i.e. bromides and iodides, trifluoromethanesulfonates (triflates) may be employed. The Sonogashira reaction is well-suited for the synthesis of unsymmetrical bis-2xy ethynes, e.g. 23, which can be prepared as outlined in the following scheme, in a one-pot reaction by applying the so-called sila-Sonogashira reaction ... 

In the direct coupling reaction (Scheme 30), it is presumed that a coordinatively unsaturated 14-electron palladium(o) complex such as bis(triphenylphosphine)palladium(o) serves as the catalytically active species. An oxidative addition of the organic electrophile, RX, to the palladium catalyst generates a 16-electron palladium(n) complex A, which then participates in a transmetalation with the organotin reagent (see A—>B). After facile trans- cis isomerization (see B— C), a reductive elimination releases the primary organic product D and regenerates the catalytically active palladium ) complex. 

Scheme 78) [89]. Aryl chlorides with activating as well as deactivating substituents could also be coupled under the same conditions in high yields, ranging from 60% to 95%, within 30-60 min of microwave irradiation. The process does not require an inert atmosphere. The increased conversion observed with the addition of the ionic liquid reveals that it might have an additional function besides simply acting as a molecular irradiator . It cannot be excluded for instance that carbene palladium complexes are formed in situ and implicated in the catalytic cycle. 

A series of new palladium complexes 26 bearing a phosphine-functionalised NHC ligand has been shown to be more efficient than typical catalytic systems (i.e. Pd(OAc), PPhj) for the reaction depicted in Scheme 7.10 [55], In fact, these conditions afforded the 9-benzylidene-97f-fluorene in higher yields when iodobenzene was used, whereas the reaction of the less reactive phenyl bromide with diphenylacetylene was achieved for the first time affording the desired product in moderate to good yields. 

The intramolecular addition of the O-H bond to alkynes catalyzed by palladium complexes has been developed by K. Utimoto et al. (Eq. 6.59) [104]. An alkynyl alcohol can be converted to a cyclic alkenyl ether in the presence of a catalytic amount of [PdCl2(PhCN)2 or [PdCl2(MeCN)2] in ether or THE at room temperature. When the reaction was carried out in MeCN-H20 under reflux in the presence of a catalytic amount of PdCl2, hydration of the acetylenic alcohol occurred and the ketoalcohol was obtained in good yield instead. 

At the beginning of the 1970s a convenient procedure was described for converting olefins into substituted butanedioates, namely through a Pd(II)-cata-lysed bisalkoxycarbonylation reaction. So far various catalytic systems have been applied to this process, but it took twenty years before the first examples of an enantioselective bisalkoxycarbonylation of olefins were reported. Ever since, the asymmetric bisalkoxycarbonylation of alkenes catalysed by palladium complexes bearing chiral ligands has attracted much attention. The products of these reactions are important intermediates in the syntheses of pharmaceuticals such as 2-arylpropionic acids, the most important class of... 

Nucleophilic Substitution of xi-Allyl Palladium Complexes. TT-Allyl palladium species are subject to a number of useful reactions that result in allylation of nucleophiles.114 The reaction can be applied to carbon-carbon bond formation using relatively stable carbanions, such as those derived from malonate esters and (3-sulfonyl esters.115 The TT-allyl complexes are usually generated in situ by reaction of an allylic acetate with a catalytic amount of fefrafcz s-(triphenylphosphine)palladium... 

Some of the details of the mechanism may differ for various catalytic systems. There have been kinetic studies on two of the amination systems discussed here. The results of a study of the kinetics of amination of bromobenzene using Pd2(dba)3, BINAP, and sodium r-amyloxide in toluene were consistent with the oxidative addition occurring after addition of the amine at Pd. The reductive elimination is associated with deprotonation of the animated palladium complex.166... 

Recently, great advancement has been made in the use of air and oxygen as the oxidant for the oxidation of alcohols in aqueous media. Both transition-metal catalysts and organocatalysts have been developed. Complexes of various transition-metals such as cobalt,31 copper [Cu(I) and Cu(II)],32 Fe(III),33 Co/Mn/Br-system,34 Ru(III and IV),35 and V0P04 2H20,36 have been used to catalyze aerobic oxidations of alcohols. Cu(I) complex-based catalytic aerobic oxidations provide a model of copper(I)-containing oxidase in nature.37 Palladium complexes such as water-soluble Pd-bathophenanthroline are selective catalysts for aerobic oxidation of a wide range of alcohols to aldehydes, ketones, and carboxylic acids in a biphasic... 

The allylation of aldehydes can be carried out using stannous chloride and catalytic cupric chloride or copper in aqueous media." In-situ probing provides indirect (NMR, CV) and direct (MS) evidence for the copper(I)-catalyzed formation of an allyltrihalostannane intermediate in very high concentration in water (Scheme 8.6). Hydrophilic palladium complex also efficiently catalyzes the allylation of carbonyl compounds with allyl chlorides or allyl alcohols with SnCl2 under aqueous-organic... 

Palladium complexes are effective catalysts for the reductive cydization of enyne substrates [53,54], The first report of catalytic cydization of 1,6- and 1,7-enynes 115a,b to cyclopentane 116a and cyclohexane 116b derivatives appeared in 1987 (Eq. 19) [70]. The authors proposed that the Pd(II) species 117 forms by oxidative addition of acetic acid to Pd(0) (Scheme 25). Complex 117 hydrometallates the alkyne to give 118, which cyclizes to provide... 

The synthesis, structure, and catalytic properties of a Pd11 complex with a partially hydrogenated ligand, shown in Figure 31, are described.393 This study provides the first asymmetric epoxidation of alkenes catalyzed by a palladium complex.393... 

In summary, these results demonstrate that air-stable POPd, POPdl and POPd2 complexes can be directly employed to mediate the rate-limiting oxidative addition of unactivated aryl chlorides in the presence of bases, and that such processes can be incorporated into efficient catalytic cycles for a variety of cross-coupling reactions. Noteworthy are the efficiency for unactivated aryl chlorides simplicity of use, low cost, air- and moisture-stability, and ready accessibility of these complexes. Additional applications of these air-stable palladium complexes for catalysis are currently under investigation. 

B(3,5-(CF3)2C6H3)4-.512 Palladium complexes with a hemilabile terdentate carbene ligand, 1,3-bis(pyl)imidazol-2-ylidene, were active toward the catalytic polymerization of CO/norbornylene.513 Palladium complexes of cz s-bidentate C4-bridged diphosphines cis- and trans- 1,2-bis [(diphenylphosphino)methyl]cyclohexane, e fl o,e fl o-2,3-bis[(diphenylphosphino)methyl] norbornane,... 

---