Catalytic cycles steps

The process of choice for acetaldehyde production is ethylene oxidation according to the so-called Wacker-Hoechst process [route (c) in Topic 5.3.2]. The reaction proceeds by homogeneous catalysis in an aqueous solution of HQ in the presence of palladium and copper chloride complexes. The oxidation of ethylene occurs in a stoichiometric reaction of PdQ2 with ethylene and water that affords acetaldehyde, metallic palladium (oxidation state 0), and HQ [step (a) in Scheme 5.3.5). The elemental Pd is reoxidized in the process by Cu(II) chloride that converts in this step into Cu(I) chloride [step (b) in Scheme 5.3.5). The Cu(II) chloride is regenerated by oxidation with air to finally close the catalytic cycle [step (c) in Scheme 5.3.5). 

When exclusively considering Lewis-add catalysis, the literature on ligand effects can be divided into studies describing quantitatively the effect of ligands on rates and equilibria of the individual steps in the catalytic cycle on one hand, and studies focused on the enantioselectivity of the reaction on the other. Interestingly, in the majority of the former investigations, aqueous media are employed. 

In Grignard reactions, Mg(0) metal reacts with organic halides of. sp carbons (alkyl halides) more easily than halides of sp carbons (aryl and alkenyl halides). On the other hand. Pd(0) complexes react more easily with halides of carbons. In other words, alkenyl and aryl halides undergo facile oxidative additions to Pd(0) to form complexes 1 which have a Pd—C tr-bond as an initial step. Then mainly two transformations of these intermediate complexes are possible insertion and transmetallation. Unsaturated compounds such as alkenes. conjugated dienes, alkynes, and CO insert into the Pd—C bond. The final step of the reactions is reductive elimination or elimination of /J-hydro-gen. At the same time, the Pd(0) catalytic species is regenerated to start a new catalytic cycle. The transmetallation takes place with organometallic compounds of Li, Mg, Zn, B, Al, Sn, Si, Hg, etc., and the reaction terminates by reductive elimination. 

The kinetics of reactions cataly2ed by very strong acids are often compHcated. The exact nature of the proton donor species is often not known, and typically the rate of the catalytic reaction does not have a simple dependence on the total concentration of the acid. However, sometimes there is a simple dependence of the catalytic reaction rate on some empirical measure of the acid strength of the solution, such as the Hammett acidity function Hq, which is a measure of the tendency of the solution to donate a proton to a neutral base. Sometimes the rate is proportional to (—log/ig)- Such a dependence may be expected when the slow step in the catalytic cycle is the donation of a proton by the solution to a neutral reactant, ie, base but it is not easy to predict when such a dependence may be found. 

The Wilkinson hydrogenation cycle shown in Figure 3 (16) was worked out in experiments that included isolation and identification of individual rhodium complexes, measurements of equiUbria of individual steps, deterrnination of rates of individual steps under conditions of stoichiometric reaction with certain reactants missing so that the catalytic cycle could not occur, and deterrnination of rates of the overall catalytic reaction. The cycle demonstrates some generally important points about catalysis the predominant species present in the reacting solution and the only ones that are easily observable by spectroscopic methods, eg, RhCl[P(CgH 2]3> 6 5)312 (olefin), and RhCl2[P(CgH )2]4, are outside the cycle, possibly in virtual equiUbrium with... 

In terms of cost, the effectiveness of the catalytic cycle in the ring closure makes this process economical in palladium. The first three steps in the reaction sequence -- ring opening of an epoxide by a Grignard reagent, converison of an alcohol to an amine with inversion, and sulfonamide formation from the amine — are all standard synthetic processes. 

The most widely accepted mechanism of reaction is shown in the catalytic cycle (Scheme 1.4.3). The overall reaction can be broken down into three elementary steps the oxidation step (Step A), the first C-O bond forming step (Step B), and the second C-O bond forming step (Step C). Step A is the rate-determining step kinetic studies show that the reaction is first order in both catalyst and oxidant, and zero order in olefin. The rate of reaction is directly affected by choice of oxidant, catalyst loadings, and the presence of additives such as A -oxides. Under certain conditions, A -oxides have been shown to increase the rate of reaction by acting as phase transfer catalysts. ... 

The synthetic utility of the alkene metathesis reaction may in some cases be limited because of the formation of a mixture of products. The steps of the catalytic cycle are equilibrium processes, with the yields being determined by the thermodynamic equilibrium. The metathesis process generally tends to give complex mixtures of products. For example, pent-2-ene 8 disproportionates to give, at equilibrium, a statistical mixture of but-2-enes, pent-2-enes and hex-3-enes ... 

The catalytic cycle of the Heck reaction can be formulated with four steps as follows ... 

As in case of other palladium-catalyzed reactions, the general mechanism of the Stille reaction is best described by a catalytic cycle—e.g. steps a) to c) ... 

Many types of functional groups are tolerated in a Suzuki reaction, and the yields are often good to very good. The presence of a base, e.g. sodium hydroxide or sodium/potassium carbonate, is essential for this reaction. The base is likely to be involved in more than one step of the catalytic cycle, at least in the transmetal-lation step. Proper choice of the base is important in order to obtain good results." In contrast to the Heck reaction and the Stille reaction, the Suzuki reaction does not work under neutral conditions. 

From intermediate C, the next step in the catalytic cycle involves a simple bond rotation to give D. This event is essential because it establishes the necessary syn relationship between a -hydrogen and the palladium atom. With a / -hydrogcn and the transition metal... 

Although analogous to the direct coupling reaction, the catalytic cycle for the carbonylative coupling reaction is distinguished by an insertion of carbon monoxide into the C-Pd bond of complex A (see A—>B, Scheme 31). The transmetalation step-then gives trans complex C which isomerizes to the cis complex D. The ketone product E is revealed after reductive elimination. 

A plausible mechanism accounting for the catalytic role of nickel(n) chloride has been advanced (see Scheme 4).10 The process may be initiated by reduction of nickel(n) chloride to nickel(o) by two equivalents of chromium(n) chloride, followed by oxidative addition of the vinyl iodide (or related substrate) to give a vinyl nickel(n) reagent. The latter species may then undergo transmetala-tion with a chromium(m) salt leading to a vinyl chromium(m) reagent which then reacts with the aldehyde. The nickel(n) produced in the oxidative addition step reenters the catalytic cycle. 

The catalytic cycle of the Na+/K+-ATPase can be described by juxtaposition of distinct reaction sequences that are associated with two different conformational states termed Ei and E2 [1]. In the first step, the Ei conformation is that the enzyme binds Na+ and ATP with very high affinity (KD values of 0.19-0.26 mM and 0.1-0.2 pM, respectively) (Fig. 1A, Step 1). After autophosphorylation by ATP at the aspartic acid within the sequence DKTGS/T the enzyme occludes the 3 Na+ ions (Ei-P(3Na+) Fig. la, Step 2) and releases them into the extracellular space after attaining the E2-P 3Na+ conformation characterized by low affinity for Na+ (Kq5 = 14 mM) (Fig. la, Step 3). The following E2-P conformation binds 2 K+ ions with high affinity (KD approx. 0.1 mM Fig. la, Step 4). The binding of K+ to the enzyme induces a spontaneous dephosphorylation of the E2-P conformation and leads to the occlusion of 2 K+ ions (E2(2K+) Fig. la, Step 5). Intracellular ATP increases the extent of the release of K+ from the E2(2K+) conformation (Fig. la, Step 6) and thereby also the return of the E2(2K+) conformation to the EiATPNa conformation. The affinity ofthe E2(2K+) conformation for ATP, with a K0.5 value of 0.45 mM, is very low. 

Carbon-carbon bond formation reactions and the CH activation of methane are another example where NHC complexes have been used successfully in catalytic applications. Palladium-catalysed reactions include Heck-type reactions, especially the Mizoroki-Heck reaction itself [171-175], and various cross-coupling reactions [176-182]. They have also been found useful for related reactions like the Sonogashira coupling [183-185] or the Buchwald-Hartwig amination [186-189]. The reactions are similar concerning the first step of the catalytic cycle, the oxidative addition of aryl halides to palladium(O) species. This is facilitated by electron-donating substituents and therefore the development of highly active catalysts has focussed on NHC complexes. 

As stated above, olefin metathesis is in principle reversible, because all steps of the catalytic cycle are reversible. In preparatively useful transformations, the equilibrium is shifted to one side. This is most commonly achieved by removal of a volatile alkene, mostly ethene, from the reaction mixture. An obvious and well-established way to classify olefin metathesis reactions is depicted in Scheme 2. Depending on the structure of the olefin, metathesis may occur either inter- or intramolecularly. Intermolecular metathesis of two alkenes is called cross metathesis (CM) (if the two alkenes are identical, as in the case of the Phillips triolefin process, the term self metathesis is sometimes used). The intermolecular metathesis of an a,co-diene leads to polymeric structures and ethene this mode of metathesis is called acyclic diene metathesis (ADMET). Intramolecular metathesis of these substrates gives cycloalkenes and ethene (ring-closing metathesis, RCM) the reverse reaction is the cleavage of a cyclo-... 

The general catalytic cycle for the coupling of aryl-alkenyl halides with alkenes is shown in Fig. 9.6. The first step in this catalytic cycle is the oxidative addition of aryl-alkenyl halides to Pd(0). The activity of the aryl-alkenyl halides still follows the order RI > ROTf > RBr > RC1. The olefin coordinates to the Pd(II) species. The coordinated olefin inserts into Pd—R bond in a syn fashion, p-Hydrogen elimination can occur only after an internal rotation around the former double bond, as it requires at least one /I-hydrogen to be oriented syn perpendicular with respect to the halopalladium residue. The subsequent syn elimination yields an alkene and a hydridopalladium halide. This process is, however, reversible, and therefore, the thermodynamically more stable (E)-alkene is generally obtained. Reductive elimination of HX from the hydridopalladium halide in the presence of a base regenerates the catalytically active Pd(0), which can reenter the catalytic cycle. The oxidative addition has frequently assumed to be the rate-determining step. 

The possible mechanism for the reactions involving stoichiometric amount of preformed Ni(0) complexes is shown in Fig. 9.8. The first step of the mechanism involves the oxidative addition of aryl halides to Ni(0) to form aryl Ni(II) halides. Disproportion of two aryl Ni(II) species leads to a diaryl Ni(II) species and a Ni(II) halide. This diaryl Ni(II) species undergoes rapid reductive elimination to form the biaryl product. The generated Ni(0) species can reenter the catalytic cycle. 

Microwave-assisted Heck reaction of (hetero)aryl bromides with N,N-dimethyl-2-[(2-phenylvinyl)oxy]ethanamine, using Herrmann s palladacycle as a precatalyst, yielded the corresponding /3-(hetero)arylated Heck products in a good EjZ selectivity (Scheme 79) [90]. The a/yd-regioselectivity can be explained by the chelation control in the insertion step. This selectivity is better than 10/90 when no severe steric hindrance is introduced in the (hetero)aryl bromides. The process does not require an inert atmosphere. There is evidence that a Pd(0)/Pd(II)- and not Pd(II)/Pd(IV)-based catalytic cycle is involved. Similarly, other j6-amino-substituted vinyl ethers such as... 

Catalytic Cycles. In the unpolluted troposphere, the two step sequence Rl, R2 was early recognized as the dominant source of HO (20,91,92) and HO as the dominant reactant for CO removal (93,94). 

---