Carbon oxygen-containing

End Absorption—UV absorption, from 210 nm down, going nonlinear at 180nm due to dissolved oxygen. Most carbon-oxygen containing compounds absorb in this area. 

A fuel specimen of 1 to 10 pL is injected by syringe into a 950 to 13(K) C high-temperature tube furnace that contains metallized carbon. Oxygen-containing compounds... 

Neither sodium borohydride nor lithium aluminum hydride reduces isolated carbon-carbon double bonds This makes possible the selective reduction of a carbonyl group m a molecule that contains both carbon-carbon and carbon-oxygen double bonds... 

The melting points and boiling points of carboxylic acids are higher than those of hydro carbons and oxygen containing organic compounds of comparable size and shape and indicate strong mtermolecular attractive forces... 

Bivalent Sulfur. The prefix thio, placed before an affix that denotes the oxygen-containing group or an oxygen atom, implies the replacement of that oxygen by sulfur. Thus the suffix -thiol denotes — SH, -thione denotes —(C)=S and implies the presence of an =S at a nonterminal carbon atom, -thioic acid denotes [(C)=S]OH [(C)=0]SH (that is, the O-substituted acid and the 5-substi-... 

Nitriles. Nitriles can be prepared by a number of methods, including ( /) the reaction of alkyl haHdes with alkaH metal cyanides, (2) addition of hydrogen cyanide to a carbon—carbon, carbon—oxygen, or carbon—nitrogen multiple bond, (2) reaction of hydrogen cyanide with a carboxyHc acid over a dehydration catalyst, and (4) ammoxidation of hydrocarbons containing an activated methyl group. For reviews on the preparation of nitriles see references 14 and 15. 

Final Purification. Oxygen containing compounds (CO, CO2, H2O) poison the ammonia synthesis catalyst and must be effectively removed or converted to inert species before entering the synthesis loop. Additionally, the presence of carbon dioxide in the synthesis gas can lead to the formation of ammonium carbamate, which can cause fouHng and stress-corrosion cracking in the compressor. Most plants use methanation to convert carbon oxides to methane. Cryogenic processes that are suitable for purification of synthesis gas have also been developed. 

Manufacture. Titanium chloride is manufactured by the chlorination of titanium compounds (1,134—138). The feedstocks usually used are mineral or synthetic mtile, beneficiated ilmenite, and leucoxenes. Because these are all oxygen-containing, it is necessary to add carbon as well as coke from either coal or fuel oil during chlorination to act as a reducing agent. The reaction is normally carried out as a continuous process in a fluid-bed reactor (139). The bed consists of a mixture of the feedstock and coke. These are fluidized by a stream of chlorine iatroduced at the base (see Fluidization). The amount of heat generated in the chlorination process depends on the relative proportions of CO2 or CO that are formed (eqs. 1 and 2), and the mechanism that... 

Figure 7.24 Deep groove in region of localized metal loss on a copper tube. Grooving was caused by carbonic acid containing high concentrations of dissolved oxygen.

Hydrogenation of epoxides lends itself well to both synthetic applications and mechanistic studies. The reaction is complex, for either carbon-oxygen bond may break with or without inversion of configuration, and the product may contain deoxygenated products (92,93) as well as ketones derived by isomerization (26). The reaction is especially sensitive to both catalyst and environment (74). 

Commonly used in biology as a tissue preservative, formaldehyde, CIDO, contains a carbon -oxygen double bond. Draw the line-bond structure of formaldehyde, and indicate the hybridization of the carbon atom. 

Pyrrole, the simplest five-membered unsaturated heterocyclic amine, is obtained commercially by treatment of furan with ammonia over an alumina catalyst at 400 °C. Furan, the oxygen-containing analog of pyrrole, is obtained by acid-catalyzed dehydration of the five-carbon sugars found in oat hulls and... 

---