Carbon cyclic ketones

Compounds which dissolve in concentrated sulphuric acid may be further subdivided into those which are soluble in syrupy phosphoric acid (A) and those which are insoluble in this solvent (B) in general, dissolution takes place without the production of appreciable heat or colour. Those in class A include alcohols, esters, aldehydes, methyl ketones and cyclic ketones provided that they contain less than nine carbon atoms. The solubility limit is somewhat lower than this for ethers thus re-propyl ether dissolves in 85 per cent, phosphoric acid but re-butyl ether and anisole do not. Ethyl benzoate and ethyl malonate are insoluble. 

Alcohols, esters (but not ethyl benzoate, ethyl malonate or ethyl oxalate), aldehydes, methyl ketones and cyclic ketones containing less than nine carbon atoms as well as ethers containing less than seven carbon atoms are soluble in 85 p>er cent, phosphoric acid. 

With ketones the e ending of an alkane is replaced by one in the longest con tinuous chain containing the carbonyl group The chain is numbered in the direction that provides the lower number for this group The carbonyl carbon of a cyclic ketone is C 1 and the number does not appear m the name... 

A similar sequence of reactions takes place with the enamlnes of cyclic ketones (55-57) the initially formed unstable cyclobutene rearranges with insertion of two carbon atoms into the ring. A wide variety of cyclic ketones have been allowed to react in this way. For instance, the enamine (75) gave 76 on reaction with dimethyl acetylenedicarboxylate in refluxing toluene (55) and the heterocyclic enamine (77) obtained from dihydro-3-(2H)-... 

A two-carbon ring expansion of cyclic ketones was achieved by the addition of acetylenic esters and diesters to the enamine derivatives of the ketones, and reported almost simultaneously from several laboratories (337-343). The intermediate bicyclic adduct could be isolated in some cases. 

From the reactions of sulfur and carbon disulfide with cyclic ketone-derived enamines (570-573) 3H-l,2-dithiole-3-thiones were obtained, whereas the addition of carbon disulfide to other enamines gave a-dithio-pyrones (574), through initial dimerization of the enamine. 

Several methods for the carbethoxylation of cyclic ketones via their enolates have been described. The methods differ primarily in the nature of the acylating agent employed. Thus, diethyl oxalate, diethyl carbonate, and ethyl diethoxyphosphinyl... 

Product composition can be controlled to a considerable extent by the molar ratio of reactants alkylation tends to become more extensive as the molar ratio of carbonyl to amine increases. Product distribution is influenced also by the catalyst and by steric hindrance with the amount of higher alkylate formed being inversely proportional to the steric hindrance in the neighborhood of the function (60 2). Cyclic ketones tend to alkylate ammonia or amines to a further extent than do linear ketones of comparable carbon number 36). 

This procedure has been patterned after the method by which the carbethoxy group is introduced into a few alicyclic ketones 6 and several cyclic ketones. Cyclohexanone has been reported to yield 50% of 2-carbethoxycyclohexanone when treated with sodium hydride and diethyl carbonate using ether as the solvent.7 The preparation of 2-carbethoxycycloheptanone using potassium f-butoxide and diethyl carbonate in benzene has been reported in 40% yield.8 Jacob and Dev report an 80% yield of the latter compound using sodium hydride as the base.9... 

The reaction of the enamines of cyclohexanones with a,ft-unsaluraled sulfones gives mixtures resulting from attack of the enamine at the a- and /(-carbons of the oc,/ -unsaturated sulfone. The ratio of x- and /1-adducts is dependent upon the reaction solvent, the geometry and structure of the sulfone1 4. The diastereoselectivity of these reactions is also poor. The reaction of lithium enolates of cyclic ketones with ( )-[2-(methylsulfonyl)ethenyl]benzene, however, gives bicyclic alcohols, as single diastereomers, that result from initial -attack on the oc,/ -unsaturated sulfone5. 

Non-Kolbe electrolysis of alicyclic p-hydroxy carboxylic acids offers interesting applications for the one-carbon ring extension of cyclic ketones (Eq. 35) [242c]. The starting compounds are easily available by Reformatsky reaction with cyclic ketones. Some examples are summarized in Table 13. Dimethylformamide as solvent and graphite as anode material appear to be optimal for this reaction. 

This procedure illustrates a new three-step reaction sequence for the one-carbon ring expansion of cyclic ketones to the homologous tt,/3-unsaturated ketones. The key step in the sequence is the iron(III) chloride-induced cleavage of the central bond of trimethyl-silyloxycyclopropanes which me obtained by cyclopropanation of trimethylsilyl enol ethers. The procedure for the preparation of 1-trimethylsilyloxycyclohexene from cyclohexanone described in Part A is that of House, Czuba, Gall, and Olmstead. ... 

In this study we examine the generalities in reductive alkylation however, since the subject is vast, we limited ourselves to the interaction of aromatic and aliphatic primary amines and diamines with ketones. The ketones examined include the cyclic ketone, cyclohexanone, and aliphatic ketones such as acetone, and methyl isobutyl ketone (MIBK). We limited our study to sulfided and unsulfided Pt and Pd catalysts supported on activated carbon that were commercially available from Evonik Degussa Corporation. 

The elimination of carbon monoxide can occur by a concerted process in some cyclic ketones. The elimination of carbon monoxide from bicyclo[2.2.1]heptadien-7-ones is very facile. In fact, generation of bicyclo[2.2.1]heptadien-7-ones is usually accompanied by spontaneous decarbonylation. 

Cyclic nitroalkenes are prepared from cyclic ketones via nitration of vinylstannanes with tetranitromethane in DMSO, as shown in Eq. 2.36, where DMSO is a critical choice of solvent for replacing tin by nitro at the unsaturated carbon. The conversion of ketones to vinylstannanes... 

Tin incorporated mesoporous Sn-MFI catalysts with different Si/Sn ratio using microwave were synthesized with carbon as hard template. These tin MFI catalysts were characterized using various physicochemical techniques XRD reviled the formation of more crystalline MFI structures which was further supported by the SEM and TEM imaging which clearly showed well ordered zeolite single crystals with mesoporosity. The N2 sorption isothers reviled the formation of bimodal mesoporous zeolites and the presence of tin in tetrahedral site was confirmed by FTIR (970 cm 1) and XPS (3ds/2 and 3 dj 2 electronic states). The thus synthesized mesoporous Sn-MFI catalysts with different Si/Sn ratios were used in studying the catalytic Baeyer-Villiger Oxidation (BVO) of cyclic ketones... 

The carbon templated tin incorporated mesoporous silicalite catalysts with MFI structure were successfully synthesized using microwave and well characterized using all the physico-chemical techniques. The catalytic activity of these catalysts was studied for liquid phase Baeyer-Villiger oxidation of various cyclic ketones using hydrogen peroxide. All the catalyst showed high conversion ( 100%) for bicyclic ketones with 100% selectivity to the corresponding lactone. 

Complexes such as 2 and 6 also insert into cyclic ketones, lactones, and carbonates to form complexes 49—51 [36],... 

Bolm et al. (130) reported the asymmetric Baeyer-Villiger reaction catalyzed by Cu(II) complexes. Aerobic oxidation of racemic cyclic ketones in the presence of pivalaldehyde effects a kinetic resolution to afford lactones in moderate enan-tioselectivity. Aryloxide oxazolines are the most effective ligands among those examined. Sterically demanding substituents ortho to the phenoxide are necessary for high yields. Several neutral bis(oxazolines) provide poor selectivities and yields in this reaction. Cycloheptanones and cyclohexanones lacking an aryl group on the a carbon do not react under these conditions. 

Five- or six-membered saturated cyclic ketones can also react by another pathway that does not involve decarbonylation. In these reactions, the biradical initially formed by a-cleavage undergoes internal disproportionation without loss of carbon monoxide, resulting in the formation of either an unsaturated aldehyde or a ketene. Methanol is usually added to convert the reactive ketene to a stable carboxylic-acid derivative (Scheme 9.2). 

Ketones can be oxidatively carbonylated at the a-carbon via enol intermediates using PdCl2 as the catalyst and Q1CI2 as oxidant [122], The initially formed carbonylation products correspond to a-chlorination and a-alkoxycarbonylation. Under the reaction conditions, these compounds undergo further transformations involving C - C cleavage eventually leading to a mixture of esters and an alkyl chloride or (in the case of cyclic ketones) to a diester and a chloroester (Schemes 20-21). 

The anion radical species also adds to a carbon nitrogen triple bond and affords cyclic ketones (Scheme 37) [79, 80]. 

An interesting deoxygenation of ketones takes place on treatment with low valence state titanium. Reagents prepared by treatment of titanium trichloride in tetrahydrofuran with lithium aluminum hydride [205], with potassium [206], with magnesium [207], or in dimethoxyethane with lithium [206] or zinc-copper couple [206,209] convert ketones to alkenes formed by coupling of the ketone carbon skeleton at the carbonyl carbon. Diisopropyl ketone thus gave tetraisopropylethylene (yield 37%) [206], and cyclic and aromatic ketones afforded much better yields of symmetrical or mixed coupled products [206,207,209]. The formation of the alkene may be preceded by pinacol coupling. In some cases a pinacol was actually isolated and reduced by low valence state titanium to the alkene [206] (p. 118). 

Acyloins were converted to mixtures of stereoisomeric vicinal diols by catalytic hydrogenation over copper chromite [972]. More frequently they were reduced to ketones by zinc (yield 77%) [913, 914], by zinc amalgam (yields 50-60%) [975], by tin (yields 86-92%) [173], or by hydriodic acid by refluxing with 47% hydriodic acid in glacial acetic acid (yields 70-90%) [916], or by treatment with red phosphorus and iodine in carbon disulfide at room temperature (yields 80-90%) [917] Procedure 41, p. 215). Since acyloins are readily accessible by reductive condensation of esters (p. 152) the above reductions provide a very good route to ketones and the best route to macro-cyclic ketones [973]. 

---