Carbenes metal-catalyzed

HeterocycHc carbene—metal-catalyzed Csp —Csp and Csp—Csp couplings using nonmetaUic substrates 13CL94. 

In the light of these results, it becomes important to question whether a particular catalytic result obtained in a transition metal-catalyzed reaction in an imidazolium ionic liquid is caused by a metal carbene complex formed in situ. The following simple experiments can help to verify this in more detail a) variation of ligands in the catalytic system, b) application of independently prepared, defined metal carbene complexes, and c) investigation of the reaction in pyridinium-based ionic liquids. If the reaction shows significant sensitivity to the use of different ligands, if the application of the independently prepared, defined metal-carbene complex... 

The strained bicyclic carbapenem framework of thienamycin is the host of three contiguous stereocenters and several heteroatoms (Scheme 1). Removal of the cysteamine side chain affixed to C-2 furnishes /J-keto ester 2 as a possible precursor. The intermolecular attack upon the keto function in 2 by a suitable thiol nucleophile could result in the formation of the natural product after dehydration of the initial tetrahedral adduct. In a most interesting and productive retrosynthetic maneuver, intermediate 2 could be traced in one step to a-diazo keto ester 4. It is important to recognize that diazo compounds, such as 4, are viable precursors to electron-deficient carbenes. In the synthetic direction, transition metal catalyzed decomposition of diazo keto ester 4 could conceivably furnish electron-deficient carbene 3 the intermediacy of 3 is expected to be brief, for it should readily insert into the proximal N-H bond to... 

The diazo function in compound 4 can be regarded as a latent carbene. Transition metal catalyzed decomposition of a diazo keto ester, such as 4, could conceivably lead to the formation of an electron-deficient carbene (see intermediate 3) which could then insert into the proximal N-H bond. If successful, this attractive transition metal induced ring closure would accomplish the formation of the targeted carbapenem bicyclic nucleus. Support for this idea came from a model study12 in which the Merck group found that rhodi-um(n) acetate is particularly well suited as a catalyst for the carbe-noid-mediated cyclization of a diazo azetidinone closely related to 4. Indeed, when a solution of intermediate 4 in either benzene or toluene is heated to 80 °C in the presence of a catalytic amount of rhodium(n) acetate (substrate catalyst, ca. 1000 1), the processes... 

One of the most dramatic recent developments in metal carbene chemistry catalyzed by dirhodium(II) has been demonstration of the feasibility and usefulness of intermolecular carbon-hydrogen insertion reactions [38, 91]. These were made possible by recognition of the unusual reactivity and selectivity of aryl- and vinyldiazoacetates [12] and the high level of electronic control that is possible in their reactions. Some of the products that have been formed in these reactions, and their selectivities with catalysis by Rh2(S-DOSP)4, are reported in Scheme 10. 

Transition metal-catalyzed carbenoid transfer reactions, such as alkene cyclopro-panation, C-H insertion, X-H insertion (X = heteroatom), ylide formation, and cycloaddition, are powerful methods for the construction of C-C and C-heteroatom bonds [1-6]. In contrast to a free carbene, metallocarbene-mediated reactions often proceed stereo- and regioselectively under mild conditions with tolerance to a wide range of functionalities. The reactivity and selectivity of metallocarbenes can be... 

Metal-Catalyzed. Cyclopropanation. Carbene addition reactions can be catalyzed by several transition metal complexes. Most of the synthetic work has been done using copper or rhodium complexes and we focus on these. The copper-catalyzed decomposition of diazo compounds is a useful reaction for formation of substituted cyclopropanes.188 The reaction has been carried out with several copper salts,189 and both Cu(I) and Cu(II) triflate are useful.190 Several Cu(II)salen complexes, such as the (V-f-butyl derivative, which is called Cu(TBS)2, have become popular catalysts.191... 

In most transition metal-catalyzed reactions, one of the carbene substituents is a carbonyl group, which further enhances the electrophilicity of the intermediate. There are two general mechanisms that can be considered for cyclopropane formation. One involves formation of a four-membered ring intermediate that incorporates the metal. The alternative represents an electrophilic attack giving a polar species that undergoes 1,3-bond formation. 

Organic halides play a fundamental role in organic chemistry. These compounds are important precursors for carbocations, carbanions, radicals, and carbenes and thus serve as an important platform for organic functional group transformations. Many classical reactions involve the reactions of organic halides. Examples of these reactions include the nucleophilic substitution reactions, elimination reactions, Grignard-type reactions, various transition-metal catalyzed coupling reactions, carbene-related cyclopropanations reactions, and radical cyclization reactions. All these reactions can be carried out in aqueous media. 

Diazomethane is also decomposed by N O)40 -43 and Pd(0) complexes43 . Electron-poor alkenes such as methyl acrylate are cyclopropanated efficiently with Ni(0) catalysts, whereas with Pd(0) yields were much lower (Scheme 1)43). Cyclopropanes derived from styrene, cyclohexene or 1-hexene were formed only in trace yields. In the uncatalyzed reaction between diazomethane and methyl acrylate, methyl 2-pyrazoline-3-carboxylate and methyl crotonate are formed competitively, but the yield of the latter can be largely reduced by adding an appropriate amount of catalyst. It has been verified that cyclopropane formation does not result from metal-catalyzed ring contraction of the 2-pyrazoline, Instead, a nickel(0)-carbene complex is assumed to be involved in the direct cyclopropanation of the olefin. The preference of such an intermediate for an electron-poor alkene is in agreement with the view that nickel carbenoids are nucleophilic 44). 

The common by-products obtained in the transition-metal catalyzed reactions are the formal carbene dimers, diethyl maleate and diethyl fumarate. In accordance with the assumption that they owe their formation to the competition of olefin and excess diazo ester for an intermediate metal carbene, they can be widely suppressed by keeping the actual concentration of diazo compound as low as possible. Usually, one attempts to verify this condition by slow addition of the diazo compound to an excess (usually five- to tenfold) of olefin. This means that the addition rate will be crucial for the yields of cyclopropanes and carbene dimers. For example, Rh6(CO)16-catalyzed cyclopropanation of -butyl vinyl ether with ethyl diazoacetate proceeds in 69% yield when EDA is added during 30 minutes, but it increases to 87 % for a 6 h period. For styrene, the same differences were observed 65). 

Interaction of an electrophilic carbene or carbenoid with R—S—R compounds often results in the formation of sulfonium ylides. If the carbene substituents are suited to effectively stabilize a negative charge, these ylides are likely to be isolable otherwiese, their intermediary occurence may become evident from products of further transformation. Ando 152 b) has given an informative review on sulfonium ylide chemistry, including their formation by photochemical or copper-catalyzed decomposition of diazocarbonyl compounds. More recent examples, including the generation and reactions of ylides obtained by metal-catalyzed decomposition of diazo compounds in the presence of thiophenes (Sect. 4.2), allyl sulfides and allyl dithioketals (Sect. 2.3.4) have already been presented. 

It has been widely accepted that the carbene-transfer reaction using a diazo compound and a transition metal complex proceeds via the corresponding metal carbenoid species. Nishiyama et al. characterized spectroscopically the structure of the carbenoid intermediate that underwent the desired cyclopropanation with high enantio- and diastereoselectivity, derived from (91).254,255 They also isolated a stable dicarbonylcarbene complex and demonstrated by X-ray analysis that the carbene moiety of the complex was almost parallel in the Cl—Ru—Cl plane and perpendicular to the pybox plane (vide infra).255 These results suggest that the rate-determining step of metal-catalyzed cyclopropanation is not carbenoid formation, but the carbene-transfer reaction.254... 

The detailed mechanism of transition metal-catalyzed cyclopropanation using diazo compounds as a carbene source is still covered by clouds of controversy, but it is generally accepted that the reaction proceeds through metal-carbenoid complexes,17-21 and the valency of the metal ions (M) changes with carbenoid formation (Scheme 85). 

Metallocyclobutanes from cyclopropanes have been frequently invoked in transition metal-catalyzed rearrangements of strained ring hydrocarbons, and this body of chemistry is quite rich and diverse, as evidenced in the excellent review by Bishop (72). Because of this diversity, the significance of isolated observations should not be overstated nevertheless, certain reactions outlined by Bishop are closely related to the carbene retroadditions reported by Gassman and co-workers using metathesis catalysts. 

The four hitherto known routes of the C-H insertion are shown in Scheme 1. In general, the insertion by singlet carbenes proceeds via route a in one step, whereas the reaction by triplet carbenes proceeds sequentially via route b, i.e., hydrogen abstraction followed by recombination of the radical pairs.4 Other stepwise mechanisms are hydride abstraction (route c) and proton abstraction (route d), both being followed by the recombination of ion pairs. However, extended study on routes c and d for synthetic purposes had not been done before we started, except for a few earlier studies on carbanion-promoted P C-H insertion reactions.5,6 Recent advances in transition metal-catalyzed... 

The involvement of carbenes has been excluded in the DNA cleavage reactions activated by cupric acetate as these experiments were conducted in the dark. However, the contribution of metal-carbenoids [79] could not be ruled out. In a series of studies dealing with the metal-catalyzed... 

The transition metal-catalyzed C-H insertion reaction of carbenes to organic compounds is a well-established synthetic method, as shown in the first two sections in this chapter. However, nitrene C-H insertion, the corresponding reaction of carbene analog, is much less known. In the past decade, considerable advances have been made in the development of this chemistry into a generally useful C-H amination process by using improved catalysts and protocols, in which readily available amines or amides are used as the starting substrates. Moreover,... 

The skeletal rearrangements are cycloisomerization processes which involve carbon-carbon bond cleavage. These reactions have witnessed a tremendous development in the last decade, and this chemistry has been recently reviewed.283 This section will be devoted to 7T-Lewis acid-catalyzed processes and will not deal, for instance, with genuine enyne metathesis processes involving carbene complex-catalyzed processes pioneered by Katz284 and intensely used nowadays with Ru-based catalysts.285 By the catalysis of 7r-Lewis acids, all these reactions generally start with a metal-promoted electrophilic activation of the alkyne moiety, a process well known for organoplatinum... 

Transition metal-catalyzed reactions of ct-diazocarbonyl compounds proceed via electrophilic Fischer-type carbene complexes. Consequently, when cr-diazoketone 341 was treated, at room temperature, with catalytic amounts of [ RhiOAcbh, it gave the formation of a single NH insertion product, which was assigned to the enol stmcture 342. At room temperature, in both solid state and in solution, 342 tautomerizes to give the expected 1-oxoperhydropyr-rolo[l,2-c]oxazole derivative 343 (Scheme 50) <1997TA2001>. 

Dehydrocyclization, 30 35-43, 31 23 see also Cyclization acyclic alkanes, 30 3 7C-adsorbed olefins, 30 35-36, 38-39 of alkylaromatics, see specific compounds alkyl-substituted benzenes, 30 65 carbene-alkyl insertion mechanism, 30 37 carbon complexes, 32 179-182 catalytic, 26 384 C—C bond formation, 30 210 Q mechanism, 29 279-283 comparison of rates, 28 300-306 dehydrogenation, 30 35-36 of hexanes over platintim films, 23 43-46 hydrogenolysis and, 23 103 -hydrogenolysis mechanism, 25 150-158 iridium supported catalyst, 30 42 mechanisms, 30 38-39, 42-43 metal-catalyzed, 28 293-319 n-hexane, 29 284, 286 palladium, 30 36 pathways, 30 40 platinum, 30 40 rate, 30 36-37, 39... 

The transition metal-catalyzed cyclopropanation of alkenes is one of the most efficient methods for the preparation of cyclopropanes. In 1959 Dull and Abend reported [617] their finding that treatment of ketene diethylacetal with diazomethane in the presence of catalytic amounts of copper(I) bromide leads to the formation of cyclopropanone diethylacetal. The same year Wittig described the cyclopropanation of cyclohexene with diazomethane and zinc(II) iodide [494]. Since then many variations and improvements of this reaction have been reported. Today a large number of transition metal complexes are known which react with diazoalkanes or other carbene precursors to yield intermediates capable of cyclopropanating olefins (Figure 3.32). However, from the commonly used catalysts of this type (rhodium(II) or palladium(II) carboxylates, copper salts) no carbene complexes have yet been identified spectroscopically. 

Most electrophilic carbene complexes with hydrogen at Cjj will undergo fast 1,2-proton migration with subsequent elimination of the metal and formation of an alkene. For this reason, transition metal-catalyzed cyclopropanations with non-acceptor-substituted diazoalkanes have mainly been limited to the use of diazomethane, aryl-, and diaryldiazomethanes (Tables 3.4 and 3.5). 

Table 3.6. Transition-metal-catalyzed cyclopropanations with carbene precursors other than diazoalkanes.

Silanes can react with acceptor-substituted carbene complexes to yield products resulting from Si-H bond insertion [695,1168-1171]. This reaction has not, however, been extensively used in organic synthesis. Transition metal-catalyzed decomposition of the 2-diazo-2-phenylacetic ester of pantolactone (3-hydroxy-4,4-dimethyltetrahydro-2-furanone) in the presence of dimethyl(phenyl)silane leads to the a-silylester with 80% de (67% yield [991]). Similarly, vinyldiazoacetic esters of pantolactone react with silanes in the presence of rhodium(II) acetate to yield a-silylesters with up to 70% de [956]. 

Ylide formation, and hence X-H bond insertion, generally proceeds faster than C-H bond insertion or cyclopropanation [1176], 1,2-C-H insertion can, however, compete efficiently with X-H bond insertion [1177]. One problem occasionally encountered in transition metal-catalyzed X-H bond insertion is the deactivation of the (electrophilic) catalyst L M by the substrate RXH. The formation of the intermediate carbene complex requires nucleophilic addition of a carbene precursor (e.g. a diazocarbonyl compound) to the complex Lj,M. Other nucleophiles present in the reaction mixture can compete efficiently with the carbene precursor, or even lead to stable, catalytically inactive adducts L M-XR. For this reason carbene X-H bond insertion with substrates which might form a stable complex with the catalyst (e.g. amines, imidazole derivatives, thiols) often require larger amounts of catalyst and high reaction temperatures. 

The normal byproducts formed during the transition metal-catalyzed decomposition of diazoalkanes are carbene dimers and azines [496,1023,1329], These products result from the reaction of carbene complexes with the carbene precursor. Their formation can be suppressed by slow addition (e.g. with a syringe motor) of a dilute solution of the diazo compound to the mixture of substrate and catalyst. Carbene dimerization can, however, also be a synthetically useful process. If, e.g., diazoacetone is treated with 0.1% RuClCpIPPhjij at 65 °C in toluene, cw-3-hexene-2,5-dione is obtained in 81% yield with high stereoselectivity [1038]. 

Tejel C, Ciriano MA (2007) Catalysis and Organometallic Chemistry of Rhodium and Iridium in the Oxidation of Organic Substrates. 22 97-124 Tekavec TN, Louie J (2006) Transition Metal-Catalyzed Reactions Using N-Heterocyclic Carbene Ligands (Besides Pd- and Ru-Catalyzed Reactions). 21 159-192 Tesevic V, see Gladysz JA (2008) 23 67-89... 

This article presents the principles known so far for the synthesis of metal complexes containing stable carbenes, including the preparation of the relevant carbene precursors. The use of some of these compounds in transition-metal-catalyzed reactions is discussed mainly for ruthenium-catalyzed olefin metathesis and palladium-Znickel-catalyzed coupling reactions of aryl halides, but other reactions will be touched upon as well. Chapters about the properties of metal- carbene complexes, their applications in materials science and medicinal chemistry, and their role in bioinorganic chemistry round the survey off. The focus of this review is on ZV-heterocyclic carbenes, in the following abbreviated as NHC and NHCs, respectively. 

---