Capillary electrophoresis background electrolyte

Polar organic solvents with electrolytes such as sodium p-toluenesulfonate are compatible with capillary electrophoresis. Background electrolyte need not be an aqueous solution. [P. B. Wright, A. S. Lister, and J. G. Dorsey, Behavior and Use of Nonaqueous Media Without Supporting Electrolyte in Capillary Electrophoresis and Capillary Electrochromatography, Anal. Chem. 1997, 69, 3251 I. E. Valko, H. Siren, and M.-L. Riekkola, Capillary Electrophoresis in Nonaqueous Media An Overview, LCGC 1997, 15, 560.]... 

Library of Cyclic Oligopeptides as Additives to Background Electrolyte for Chiral Capillary Electrophoresis... 

Enantioresolution in capillary electrophoresis (CE) is typically achieved with the help of chiral additives dissolved in the background electrolyte. A number of low as well as high molecular weight compounds such as proteins, antibiotics, crown ethers, and cyclodextrins have already been tested and optimized. Since the mechanism of retention and resolution remains ambiguous, the selection of an additive best suited for the specific separation relies on the one-at-a-time testing of each individual compound, a tedious process at best. Obviously, the use of a mixed library of chiral additives combined with an efficient deconvolution strategy has the potential to accelerate this selection. 

Indirect UV absorbance detection in capillary zone electrophoresis has been used to analyze sodium alcohol sulfates. Excellent reproducibility was obtained when veronal buffer was used as UV-absorbing background electrolyte [302],... 

Capillary electrophoresis (CE) or capillary zone electrophoresis (CZE) is the technique most often employed in pesticide residue analysis. In its most basic form, free zone electrophoresis, a fused-silica capillary is filled with electrolyte (running buffer or background electrolyte). A potential is applied across the capillary and the cations... 

Fig. 3.161. (A) Zone electrophoresis patterns of FITC-labelled transferrin samples by fluorescence detection. The unbound dye (providing a main peak and several minor ones) was not removed from the samples. Experimental conditions background electrolyte, 100 mM borate buffer, pH 8.3 voltage, 20 kV capillary 59 cm (effective length 41 cm) X 75 pm i.d. injection of samples 100 mbar x s 20°C detection with fluorescence detector (240 - 400 nm, broadband excitation filter and a 495 nm cut-off emmision filter). The reaction was left to continue for 20 h, and the reaction mixtures contained 13 pm (1 mg/ml) Tf and (a) 0.01 mM FITC, (b) 0.1 mM FITC, and 1 mM FITC. (B) Zone electrophoresis patterns of an FITC-labelled transferrin sample by simultaneous fluorescence (upper trace, left axis) and UV detection (lower trace, right axis). The unbound dye shows several peaks with both detections. Experimental conditions background electrolyte, 100 mM borate buffer, pH 8.3 voltage, 20 kV capillary 59 cm (effective length fluorescence 41 cm, UV 50.5 cm) X 75 pm i.d. injection of samples 100 mbar X s 20°C detection with fluorescence detector (240 - 400 nm, broadband excitation filter and a 495 nm cut off emmision filter). The reaction was left to continue for 20 h, and the reaction mixtures contained 6.5 pm (0.5 mg/ml) Tf and 0.1 mM FITC. Reprinted with permission from T. Konecsni et al. [199].

In CZE, the capillary, inlet reservoir, and outlet reservoir are filled with the same electrolyte solution. This solution is variously termed background electrolyte, analysis buffer, or run buffer. In CZE, the sample is injected at the inlet end of the capillary, and components migrate toward the detection point according to their mass-to-charge ratio by the electrophoretic mobility and separations principles outlined in the preceding text. It is the simplest form of CE and the most widely used, particularly for protein separations. CZE is described in Capillary Zone Electrophoresis. ... 

Beckers, J. L., and Bocek, P. (2003). The preparation of background electrolytes in capillary zone electrophoresis golden rules and pitfalls. Electrophoresis 24, 518 — 535. 

Jaros, M., Hruska, V., Stedry, M., Zuskova, I., and Gas, B. (2004). Eigenmobilities in background electrolytes for capillary zone electrophoresis. IV. Computer program PeakMaster. Electrophoresis 25, 3080-3085. 

Qin, W., and Li, S.F.Y., Determination of ammonium and metal ions by capillary electrophoresis-potential gradient detection using ionic liquid as background electrolyte and covalent coating agent, ]. Chromatogr. A., 1048, 253-256,2004. 

Ionic liquids as background electrolyte additives in capillary electrophoresis... 

Vaher, M. and Koel, M., Specific background electrolytes for nonaqueous capillary electrophoresis,. Chromatogr. A, 1068, 83-88,2005. 

Borissova, M., Gorbatsova, J., Ebber, A., Kaljurand, M., Koel, M., and Vaher, M., Non-aqueous capillary electrophoresis using contactless conductivity detection and ionic liquids as background electrolytes in acetonitrile. Electrophoresis, 28, 3600-3605,2007. 

Figure 26-31 Separation of natural isotopes of 0.56 mM Cl by capillary electrophoresis with indirect spectrophotometrlc detection at 254 nm. Background electrolyte contains 5 mM CrOJ to provide absorbance at 254 nm and 2 mM borate buffer, pH 9.2. The capillary had a diameter of 75 m, a total length of 47 cm (length to detector = 40 cm), and an applied voltage of 20 kV. The difference in electrophoretic mobility of 36C and 37CI is just 0.12%. Conditions were adjusted so that electroosmotlc flow was nearly equal to and opposite electrophoretic flow. The resulting near-zero net velocity gave the two isotopes maximum time to be separated by their slightly different mobilties. [From C. A Lucy and T. L McDonald, "Separation of Chloride Isotopes by Capillary 35 40 45 Electrophoresis Based on the Isotope Effect on Ion Mobility"Anal.

Determination of inorganic anions by capillary electrophoresis is critically compared with ion chromatographic determinations on the basis of recent literature in the field. After a very brief summary of the theoretical background, the selection and optimization of the running electrolyte system are discussed, especially in connection with modification of the electroosmotic flow. Preconcentration techniques are surveyed, as are the approaches to the sample introduction and analyte detection. The principal analytical parameters of the determinations are evaluated and illustrated on selected applications described in the literature. 1997 Elsevier Science B.V. 

In capillary zone electrophoresis microchips, where the background electrolyte consists only of aqueous buffer, analytes are separated based on a size-to-charge ratio, and neutral analytes are not resolved from each other. 

Berzas Nevado et al. [138] developed a new capillary zone electrophoresis method for the separation of omeprazole enantiomers. Methyl-/ -cyclodextrin was chosen as the chiral selector, and several parameters, such as cyclodextrin structure and concentration, buffer concentration, pH, and capillary temperature were investigated to optimize separation and run times. Analysis time, shorter than 8 min was found using a background electrolyte solution consisting of 40 mM phosphate buffer adjusted to pH 2.2, 30 mM /1-cyclodextrin and 5 mM sodium disulfide, hydrodynamic injection, and 15 kV separation voltage. Detection limits were evaluated on the basis of baseline noise and were established 0.31 mg/1 for the omeprazole enantiomers. The method was applied to pharmaceutical preparations with recoveries between 84% and 104% of the labeled contents. 

The most common classification scheme in electrophoresis focuses on the nature of electrolyte system. Using this scheme, electrophoretic modes are classified as continuous or discontinuous systems. Within these groupings the methods may be further divided on the basis of constancy of the electrolyte if the composition of the background electrolyte is constant as in capillary zone electrophoresis, the result is a kinetic process. If the composition of the electrolyte is not constant, as in isoelectric focusing, the result is a steady-state process. 

Capillary affinity electrophoresis (CAE) or affinity capillary electrophoresis (ACE) — An electrophoretic separation technique (- electrophoresis), in which -> analytes are separated in a capillary, with the -> supporting (background) electrolyte containing substances capable of specific, often biospecific, interactions with the analytes. Ref [i] Riekkola ML, Jonsson jA, Smith RM (2004) Pure Appl Chem 76 443... 

Capillary sieving electrophoresis (CSE) — An electrophoresis technique, in which analytes are separated in a capillary, containing a sieving medium (e.g., an entangled polymer network) in the -> supporting (background) electrolyte. The separation is based on differences in size and shape of the charged analytes. 

Kodama, S. et al. Direct chiral resolution of tartaric acid by ion-pair capillary electrophoresis using an aqueous background electrolyte with (lR,2R)-(-)-l,2-diaminocyclo-hexane as a chiral covmterion. Electrophoresis 2003, 24, 2711-2715. 

---