Butylene terephthalate plastic properties

Poly(trimethylene terephthalate). Poly(trimethylene terephthal-ate) (PIT) is a crystalline polymer that is used for fibers, films, and engineering plastics. The polymer has an outstanding tensile elastic recovery, good chemical resistance, a relative low melting temperature, and a rapid crystallization rate. It combines some of the advantages of poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT). Disadvantageous are the low heat distortion temperature, low melt viscosity, poor optical properties, and pronounced brittleness low temperatures. 

The decorative laminates described in the previous chapter are made with selected thermosetting resins while resins of this type can be moulded and extruded by methods similar to those outlined in the present and the next chapter the materials employed for these processes predominantly are thermoplastic. Many such plastics can be moulded and extruded under suitable conditions, the most important in terms of quantities used being those that combine properties satisfactory for the purpose with convenience in pro-cessing-especially the polyolefins (polyethylene and polypropylene), poly(vinyl chloride), and styrene polymers and blends. Other plastics with special qualities, such as better resistance to chemical attack, heat, impact, and wear, also are used—including acetals (polyformaldehyde or polyoxymethylene), polyamides, polycarbonates, thermoplastic polyesters like poly(ethylene terephtha-late) and poly(butylene terephthalate), and modified poly(phenylene oxide),... 

Among polyesters synthesized from 1,4-benzenedicarboxylic acid and aliphatic diols, poly (ethylene terephthalate) (PET) and poly (butylene terephthalate) (PBT) are the most frequently applied ones. Hydrolysis is evidently the easiest chemical recycling technique of polyesters, however they may be mixed with other waste plastics, thus it is useful to know the properties of their pyrolysis product. 

Poly(butylene terephthalate) (PBT) is produced in a much smaller voliune than PET. However, PBT is more widely accepted as an injection-moldable engineering plastic in the large automotive and electronic markets due to its faster crystallization rate (Pratt and Hobbs 1976). Hence, PBT is more commonly employed in the formulation of blends also. PBT has generally been preferred over PET in the engineering plastics arena because of its superior processability, faster crystallization rate, shorter molding cycles, and better properties (DTUL/impact balance) in the molded parts, particularly in the unfilled form. Nevertheless, PET is also used to... 

M. M. Reddy, M. Misra, A. K. Mohanty. Biodegradable Blends from Com Gluten Meal and Poly (butylene adipate-co-terephthalate)(PBAT) Studies on the Influence of Plasticization and Destmcturization on Rheology, Tensile Properties and Interfacial Interactions , J. Polym. Environ., 22, 167-175 (2014) ... 

The compatibilizer improves the mechanical properties of PE/starch, and addition of a plasticizer is actually detrimental to the finished products. Although PE is used here to demonstrate the results of this invention, results are practically the same with other combinations of polymer and compatibilizer as disclosed therein. Incorporation of compatibiHzer is easily accomplished by mechanical blending of the polymer, starch, and compatibilizer prior to extrusion. Typically, the compatibilizer is composed of the same polymer as the primary polymer itself. The polymer component of the compatibilizer may be selected from the group consisting of polyethylene, polypropylene, polystyrene, polybutylene, poly(styrene-ethyl-ene-butylene-stryrene), poly(ethylene terephthalate), polyvinyl fluoride, polyvinyl chloride, or derivatives thereof [6]. 

---