Butyl rubber Calcium chloride

B. Di-tert-hutyl malonate. A 1-1. three-necked flask is fitted with a thermometer, a mercury- or rubber sleeve-sealed mechanical stirrer, a reflux condenser protected by a calcium chloride guard tube, and a dropping funnel (either pressure-equalized or protected by a calcium chloride guard tube). A mixture of 100 ml. (about 1 mole) of tert-butyl alcohol, dried by distillation from sodium,2 and 80 ml. (0.63 mole) of dry dimethylanilinc (Note 5) is placed in the flask, the stirrer is started, and a solu-... 

Potassium Cyanide Solutions. Wear breathing apparatus, eye protection, laboratory coat, and butyl rubber gloves. Instruct others to keep a safe distance. Cover the spill with a 1 1 1 mixture by weight of sodium carbonate or calcium carbonate, clay cat litter (bentonite), and sand. Scoop the mixture into a container and transport to the fume hood. Slowly, and while stirring, add the slurry to a pail containing household bleach (about 70 mL/g of cyanide). Test the solution for the presence of cyanide using the Prussian blue test. To 1 mL of the solution, add 2 drops of a freshly prepared 5% aqueous ferrous sulfate solution. Boil the mixture for at least 60 seconds, cool to room temperature and add 2 drops of 1 % ferric chloride solution. Add 6 M hydrochloric acid (prepared by... 

Small Quantities. Wear butyl rubber gloves, laboratory coat, and eye protection. In the fume hood, pour the thionyl chloride into a large evaporating dish. Cover the thionyl chloride with excess solid sodium carbonate or calcium carbonate. When the reaction has subsided, very slowly add the mixture to a pail of cold water. Allow to stand for 24 hours. Test the pH of the solution and neutralize if necessary. Wash the solution into the drain.11... 

CHLORINE FLUORIDE OXIDE (7616-94-6) Noncombustible, but many chemical reactions can cause fire and explosions. A powerful oxidizer. Reacts violently with reducing materials, alcohols, alkalis, amines, anilines, benzene, butyl-amine, calcium hydride, calcium acetylide, charcoal, combustible materials, ethers, hydrazine, hydrogen sulfide, finely divided metals, nitric oxide, olefins, orgtinic substances, potassium cyanide, potassium thiocyanate, sodium, strontium hydride, sulfur, sulfur dichloride, sulfuric acid. Incompatible with hydrogen sulfide, potassium thiocyanate, vinylidene chloride. Forms heat-, friction-, and shock-sensitive explosives with calcium hydride, nitrogenous bases, isopropylamine. Attacks some plastics, rubber, and coatings. 

All solvents and monomers were purified and stored under nitrogen atmosphere. The r-butyl chloride (r-BuCl, Eastman) was distilled from calcium hydride under nitrogen atmosphere prior to use. Diethylaluminum chloride (Et2 A1C1, Texas Alkyls Co.) was purified by vacuum distillation (bp °C/mm Hg 110/25). Ethyl chloride (EtCl, Linde Division, Union Carbide Co.) was purified by passing through a column packed with Molecular Sieves and barium oxide. The m-3-hexene (Chemical Samples Company) was distilled under nitrogen prior to use. The polybutadiene, Diene 35, from the Firestone Tire and Rubber Company and high 1,2-polybutadiene were purified by reprecipitations from benzene into excess acetone. 

---