Butyl acetate chloride

Titanium—Vanadium Mixed Metal Alkoxides. Titanium—vanadium mixed metal alkoxides, VO(OTi(OR)2)2, are prepared by reaction of titanates, eg, TYZOR TBT, with vanadium acetate ia a high boiling hydrocarbon solvent. The by-product butyl acetate is distilled off to yield a product useful as a catalyst for polymeri2iag olefins, dienes, styrenics, vinyl chloride, acrylate esters, and epoxides (159,160). 

Finally, reaction of primary, secondary, or tertiary alcohols 11 with Me3SiCl 14 in the presence of equivalent amounts of DMSO leads via 789 and 790 to the chloro compounds 791 [13]. n-Pentanol, benzyl alcohol, yS-phenylefhanol or tert-butanol are readily converted, after 10 min reaction time, into their chloro compounds, in 89-95% yield, yet cyclohexanol affords after reflux for 4 h cyclohexyl chloride 784 in only 6% yield [13] (Scheme 6.5). 1,4-Butanediol is cyclized to tetrahydrofuran (THF) [13a], whereas other primary alcohols are converted in 90-95% yield into formaldehyde acetals on heating with TCS 14 and DMSO in benzene [13b] (cf also the preparation of formaldehyde di(n-butyl)acetal 1280 in Section 8.2.1). 

DMSO or other sulfoxides react with trimethylchlorosilanes (TCS) 14 or trimefhylsilyl bromide 16, via 789, to give the Sila-Pummerer product 1275. Rearrangement of 789 and further reaction with TCS 14 affords, with elimination of HMDSO 7 and via 1276 and 1277, methanesulfenyl chloride 1278, which is also accessible by chlorination of dimethyldisulfide, by treatment of DMSO with Me2SiCl2 48, with formation of silicon oil 56, or by reaction of DMSO with oxalyl chloride, whereupon CO and CO2 is evolved (cf also Section 8.2.2). On heating equimolar amounts of primary or secondary alcohols with DMSO and TCS 14 in benzene, formaldehyde acetals are formed in 76-96% yield [67]. Thus reaction of -butanol with DMSO and TCS 14 gives, via intermediate 1275 and the mixed acetal 1279, formaldehyde di-n-butyl acetal 1280 in 81% yield and methyl mercaptan (Scheme 8.26). Most importantly, use of DMSO-Dg furnishes acetals in which the 0,0 -methylene group is deuter-ated. Benzyl alcohol, however, affords, under these reaction conditions, 93% diben-zyl ether 1817 and no acetal [67]. 

Synthesis of isomeric chiral protected (63 )-6-amino-hexahydro-2,7-dioxopyrazolo[l,2- ]pyrazole-l-carboxylic acid 280 is shown in Scheme 36. Crude vinyl phosphonate 275, obtained by treatment of diethyl allyloxycarbonylmethyl-phosphonate with acetic anhydride and tetramethyl diaminomethane as a formaldehyde equivalent, was used in the Michael addition to chiral 4-(f-butoxycarbonylamino)pyrazolidin-3-one 272. The Michael addition is run in dichloro-methane followed by addition of f-butyl oxalyl chloride and 2 equiv of Huning s base in the same pot to provide 276 in 58% yield. The allyl ester is deprotected using palladium catalysis to give the corresponding acid 277, which is... 

Ethyl tert-butyl malonate has been prepared by adding tert-butyl acetate and ethyl carbonate to sodium triphenylmethyl,3 and from ethyl malonyl chloride and fer/-butyl alcohol.4 The present procedure is an adaptation of that for the preparation of di-fer(-butyl malonate.2... 

The /V -hydroxylamino compounds (404) and (405), obtained from the reaction of tert-butyl acetate with 3,4-dihydroisoquinoline-A-oxide or 5,5-dimethyl-pyrroline-/V-oxide, when boiled in methylene chloride in the presence of triphenylphosphine, carbon tetrachloride and triethylamine, are transformed to (1,2,3,4- tetrahydroisoquinolin-l-ilidene) acetate (406) or (pyrrolidin-2-ilidene) acetate (407) (Scheme 2.181) (645). 

Butyl acetate Unknown 1 Eerrous chloride Unknown s... 

Bromine (dry gas) Bromine (liquid) Bromobenzene Butanol Butyl acetate Butylamine Butylchloride Butyric acid Calcium chloride Carbon tetrachloride Castor oil Cellosolve Cellosolve acetate Chlorine (dry gas) Chlorine water Chloroacetic acid Chlorobenzene Chloroform Chlorosulfonic acid Chromic acid Citric acid Colza oil Copper sulfate Cyclohexane Cyclohexanol Cyclohexanone... 

Acetamido-4-amino-6-chloro-s-triazine, see Atrazine Acetanilide, see Aniline, Chlorobenzene, Vinclozolin Acetic acid, see Acenaphthene, Acetaldehyde, Acetic anhydride. Acetone, Acetonitrile, Acrolein, Acrylonitrile, Aldicarb. Amyl acetate, sec-Amyl acetate, Bis(2-ethylhexyl) phthalate. Butyl acetate, sec-Butyl acetate, ferf-Butyl acetate, 2-Chlorophenol, Diazinon. 2,4-Dimethylphenol, 2,4-Dinitrophenol, 2,4-Dinitrotoluene, 1,4-Dioxane, 1,2-Diphenylhydrazine, Esfenvalerate. Ethyl acetate, Flucvthrinate. Formic acid, sec-Hexyl acetate. Isopropyl acetate, Isoamyl acetate. Isobutyl acetate, Methanol. Methyl acetate. 2-Methvl-2-butene. Methyl ferf-butvl ether. Methyl cellosolve acetate. 2-Methvlphenol. Methomvl. 4-Nitrophenol, Pentachlorophenol, Phenol. Propyl acetate. 1,1,1-Trichloroethane, Vinyl acetate. Vinyl chloride Acetoacetic acid, see Mevinphos Acetone, see Acrolein. Acrylonitrile. Atrazine. Butane. 

Toluene, methylene chloride, cyclohexanone, butyl acetate... 

An example of CO2 enhanced aqueous extraction is shown in Figure 7 for tetrabutylammonium picrate (TBAP). Three common solvents for PTC butyl acetate, methyl isobutyl ketone (MIBK) and methylene chloride were used as the organic phase. 

Figure 7. TBAP distribution coefficient as a function of CO2 pressure at room temperature (23-25 °C). Organic solvents used butyl acetate, methyl isobutyl ketone and methylene chloride. 20 mL 8.770 x 10 M TBAP aqueous solution, 20 mL organic solvent (17).

Sec-Butyl Acetate N-Butyl Acrylate Iso-Butyl Acrylate N-Butyl Acrylate N-butyl Alcohol N-Butyl Alcohol Sec-Butyl Alcohol Tert-butyl Alcohol N -Butyraldehyde N-butyl Methacrylate N-Butylamine N-Butylamine Sec-Butylamine Tert-Butylamine Benzyl N-butyl Phthalate N-Amyl Alcohol N-Amyl Chloride... 

Oils Edible Safflower Potassium Binoxalate Ammonium Chloride Salicylic Acid Ammonium Chloride Lead Acetate Potassium Binoxalate Sodium Silicofluoride Ammonium Carbonate Fluocilicic Acid P-Dichlorobenzene Ammonium Phosphate Sec-Butyl Acetate Sec-Butyl Alcohol Calcium Phosphate Selenium Trioxide Selenium Dioxide Selenium Dioxide Selenium Dioxide Selenium Trioxide Antimony Trioxide Calcium Hypochlorite Carbaryl Cyclohexanone Charcoal... 

Other important raw material uses of ethyl alcohol are conversion to esters and ethers, vinegar, ethyl chloride, butadiene, styrene, and chloral (for DDT). Nearly all the new developments in chemicals from ethyl alcohol, particularly the four-, six-, and eight-carbon derivatives are based on alcohol derived from petroleum. The butyl alcohol and butyl acetate so made supplement the production by fermentation and from oxidation of hydrocarbons and synthesis gas operations. The consumption of ethyl alcohol for all industrial uses (denatured alcohol) exceeded 1.2 billion pounds (100% basis) in 1950. More than 700,000,000 pounds of this were made from petroleum. 

Alternatively the oxidation of 4 -(methylsulfonyl) acetophenone with S8 and morpholine produces the 2-(4-(methylsulfonyl)phenyl)acetic acid ethyl ester (xiv), which is condensed with 2-methylpyridine-3-carboxylic acid methyl ester by means of terf-butyl magnesium chloride in hot tetrahydrofurane to give the ketosulfone (ix). 

From this ranking, quaternary ammonium acetates, chlorides, nitrates, and bromides are apparently more soluble in organic solvents such as aqueous /-butyl alcohol than are the corresponding quaternary ammonium hydroxides. Thus these quaternary ammonium salts would be readily extracted into the organic phase. In addition, a high concentration of... 

---