Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Butadienes Diels-Alder with

Z)-Pentadienone, 265 Diels-Alder with butadiene, 266, 267 SHMO, 265, 266... [Pg.338]

Electrophilic Silylation Reagent. l,2-Bis(chlorodimethyl-silyl)ethane is not only an effective amine silylating reagent, but can also be employed in reactions with other anions. For example, when treated with the silver sulfonate salt as in eq 11, the nonafluorobutanesulfonic acid silyl ester (27), an extremely powerful silylating reagent, results.Carbanions are also effectively trapped by (1) A series of rigid butadiene Diels-Alder precursors such as (28) have been prepared in this fashion as outlined in eq 12.12... [Pg.50]

Let us now examine the Diels-Alder cycloaddition from a molecular orbital perspective Chemical experience such as the observation that the substituents that increase the reac tivity of a dienophile tend to be those that attract electrons suggests that electrons flow from the diene to the dienophile during the reaction Thus the orbitals to be considered are the HOMO of the diene and the LUMO of the dienophile As shown m Figure 10 11 for the case of ethylene and 1 3 butadiene the symmetry properties of the HOMO of the diene and the LUMO of the dienophile permit bond formation between the ends of the diene system and the two carbons of the dienophile double bond because the necessary orbitals overlap m phase with each other Cycloaddition of a diene and an alkene is said to be a symmetry allowed reaction... [Pg.414]

Since the six carbons shown above have 10 additional bonds, the variety of substituents they carry or the structures they can be a part of is quite varied, making the Diels-Alder reaction a powerful synthetic tool in organic chemistry. A moment s reflection will convince us that a molecule like structure [XVI] is monofunctional from the point of view of the Diels-Alder condensation. If the Diels-Alder reaction is to be used for the preparation of polymers, the reactants must be bis-dienes and bis-dienophiles. If the diene, the dienophile, or both are part of a ring system to begin with, a polycyclic product results. One of the first high molecular weight polymers prepared by this synthetic route was the product resulting from the reaction of 2-vinyl butadiene [XIX] and benzoquinone [XX] ... [Pg.337]

A method for making ben2onitri1e by dehydrogenation of the Diels-Alder adduct of butadiene and acrylonitrile also has been described (79). Ben2onitri1e also can be made on a small scale by the dehydration of ben2amide ia an iaert solvent with phosphoms oxychloride or ben2enesulfonyl chloride and an organic amine (80,81). [Pg.225]

Acrolein a.s Dienophile. The participation of acrolein as the dienophile in Diels-Alder reactions is, in general, an exothermic process. Dienes such as cyclopentadiene and l-dieth5laniino-l,3-butadiene react rapidly with acrolein at room temperature. [Pg.127]

Diels-Alder Reaction. In 1928, Diels and Alder discovered that 1,3-unsaturated organic compounds reacted with quinoid systems to give partially hydrogenated, cycHc compounds. In the course of their work, they found that 1 mol of 1,4-naphthoquinone [130-15-4] reacted readily with 1 mol of 1,3-butadiene [106-99-0] to give a partially hydrogenated anthraquinone (11) l,4,4a,9a-tetrahydro-9,10-anthracenedione [56136-14-2] which, on oxidation with chromic oxide, produced anthraquinone (43) ... [Pg.424]

Sulfur dioxide acts as a dienophile ia the Diels-Alder reaction with many dienes (253,254) and this reaction is conducted on a commercial scale with butadiene. The initial adduct, sulfolene [77-79-2] is hydrogenated to a solvent, sulfolane [126-33-0] which is useful for selective extraction of aromatic hydrocarbons from... [Pg.145]

A process has been disclosed in which the mixture of naphthoquinones is reacted with a diene such as butadiene. Owing to the fact that the undesked product is an unsubstituted naphthoquinone, this dieneophile readily reacts to form a Diels-Alder adduct. By appropriate control of reaction parameters, Htde reaction is observed with the substituted naphthoquinone. Differential solubiUty of the adduct and vitamin allows for a facile separation (57,58). [Pg.154]

Reaction between oxygen and butadiene in the Hquid phase produces polymeric peroxides that can be explosive and shock-sensitive when concentrated. Ir(I) and Rh(I) complexes have been shown to cataly2e this polymerisation at 55°C (92). These peroxides, which are formed via 1,2- and 1,4-addition, can be hydrogenated to produce the corresponding 1,2- or 1,4-butanediol [110-63-4] (93). Butadiene can also react with singlet oxygen in a Diels-Alder type reaction to produce a cycHc peroxide that can be hydrogenated to 1,4-butanediol. [Pg.343]

Diels-Alder reactions with butadiene are generally thermally reversible and can proceed in both gas and Hquid phases. The reactions are exothermic and foUow second-order kinetics first-order with respect to each reactant. [Pg.343]

Elastomers. Ethylene—propylene terpolymer (diene monomer) elastomers (EPDM) use a variety of third monomers during polymerization (see Elastomers, ethyiene-propylene-diene rubber). Ethyhdenenorbomene (ENB) is the most important of these monomers and requires dicyclopentadiene as a precursor. ENB is synthesized in a two step preparation, ie, a Diels-Alder reaction of CPD (via cracking of DCPD) with butadiene to yield 5-vinylbicyclo[2.2.1]-hept-2-ene [3048-64-4] (7) where the external double bond is then isomerized catalyticaHy toward the ring yielding 5-ethyhdenebicyclo[2.2.1]-hept-2-ene [16219-75-3] (ENB) (8) (60). [Pg.434]

Since diazaquinones are among the most powerful dienophiles, they undergo [4+2] cycloaddition (Diels-Alder) reactions with a great variety of dienes to give various heterocyclic systems accessible with difficulty by other methods. Diazaquinone reacts with butadiene and substituted butadienes, carbocyclic and heterocyclic dienes, 1-vinylcycloalkenes, polyaromatic compounds and vinylaromatic compounds to afford bicyclic and polycyclic bridgehead diaza systems, including diazasteroids (Scheme 56). [Pg.38]

Other methods for the preparation of cyclohexanecarboxaldehyde include the catalytic hydrogenation of 3-cyclohexene-1-carboxaldehyde, available from the Diels-Alder reaction of butadiene and acrolein, the reduction of cyclohexanecarbonyl chloride by lithium tri-tcrt-butoxy-aluminum hydride,the reduction of iV,A -dimethylcyclohexane-carboxamide with lithium diethoxyaluminum hydride, and the oxidation of the methane-sulfonate of cyclohexylmethanol with dimethyl sulfoxide. The hydrolysis, with simultaneous decarboxylation and rearrangement, of glycidic esters derived from cyclohexanone gives cyclohexanecarboxaldehyde. [Pg.15]

Cycloaddition involves the combination of two molecules in such a way that a new ring is formed. The principles of conservation of orbital symmetry also apply to concerted cycloaddition reactions and to the reverse, concerted fragmentation of one molecule into two or more smaller components (cycloreversion). The most important cycloaddition reaction from the point of view of synthesis is the Diels-Alder reaction. This reaction has been the object of extensive theoretical and mechanistic study, as well as synthetic application. The Diels-Alder reaction is the addition of an alkene to a diene to form a cyclohexene. It is called a [47t + 27c]-cycloaddition reaction because four tc electrons from the diene and the two n electrons from the alkene (which is called the dienophile) are directly involved in the bonding change. For most systems, the reactivity pattern, regioselectivity, and stereoselectivity are consistent with describing the reaction as a concerted process. In particular, the reaction is a stereospecific syn (suprafacial) addition with respect to both the alkene and the diene. This stereospecificity has been demonstrated with many substituted dienes and alkenes and also holds for the simplest possible example of the reaction, that of ethylene with butadiene ... [Pg.636]

Fluorinaied dienophiles. Although ethylene reacts with butadiene to give a 99 98% yield of a Diels-Alder adduct [63], tetrattuoroethylene and 1,1-dichloro-2,2-difluoroethylene prefer to react with 1,3-butadiene via a [2+2] pathway to form almost exclusively cyclobutane adducts [61, 64] (equation 61). This obvious difference in the behavior of hydrocarbon ethylenes and fluorocarbon ethylenes is believed to result not from a lack of reactivity of the latter species toward [2+4] cycloadditions but rather from the fact that the rate of nonconcerted cyclobutane formation is greatly enhanced [65]... [Pg.818]

In a definitive study of butadiene s reaction with l,l-dichloro-2,2-difluoio-ethylene, Bartlett concluded that [2+4] adducts of acyclic dienes with fluorinated ethylenes are formed through a mixture of concerted and nonconcerted, diradical pathways [67] The degree of observed [2+4] cycloaddition of fluorinated ethylenes IS related to the relative amounts of transoid and cisoid conformers of the diene, with very considerable (i.e., 30%) Diels-Alder adduct being observed in competition with [2+2] reaction, for example, in the reaction of 1,1 -dichloro-2,2-difluoro-ethylene with cyclopentadiene [9, 68]... [Pg.818]

On the other hand, Chambers found that the related perfluorobiscyclobut-yhdene undergoes Diels-Alder reactions with butadiene, cyclopentadiene, and furan [79, 56] (equation 71) Such enhanced reactivity may be due to strain in the substrate... [Pg.821]

Although hexafluoro-l,3-butadiene is better known for its [2+2] reactions, its Diels-Alder reactions, particularly with electron-deficient alkenes such as acrylonitrile and perfluoropropene, are not unknown [9] The first report of a Diels-Alder reaction is with an acetylenic dienophile Although the major product of Us reaction with phenylacetylene is its [2+2] adduct, a 3 5% yield of products of a Diels-Alder reaction is also observed [123] (equation 103)... [Pg.834]

Lastly, in perfluorobutadiene s codimerization reaction with butadiene, a significant amount of Diels-Alder adduct is obtained, with the perfluorodiene acting as the diene component [125] (equation 105)... [Pg.834]

One of the features of Diels-Alder reactions with most alkyl and aryl nitriles that has made them rather unattractive as dienophiles is the requirement of very high reaction temperatures Again, only when electron-withdrawing substituents are directly bonded to the nitnle function do [4+2] cycloaddition reactions occur at reasonably low temperatures [ 48, 231, 232] A high yield [4+2] cycloaddition was observed on reaction of 4,4-bis(trifluoromethyl) 1 thia-3-aza-l,3-butadienes with trifluoroacetonitrile at 150 °C [225]... [Pg.871]

The total syntheses of fredericamycin 71 and camptothecin 72 made use of similar strategies. N-Sulfonyl-l-aza-1,3-butadienes in conjunction with electron rich dienophiles participated in the inverse electron demand Diels-Alder reaction to afford pyridines after treatment with base. [Pg.333]


See other pages where Butadienes Diels-Alder with is mentioned: [Pg.271]    [Pg.358]    [Pg.333]    [Pg.333]    [Pg.338]    [Pg.71]    [Pg.24]    [Pg.463]    [Pg.424]    [Pg.344]    [Pg.37]    [Pg.503]    [Pg.9]    [Pg.326]   
See also in sourсe #XX -- [ Pg.90 , Pg.92 , Pg.93 , Pg.98 , Pg.99 , Pg.100 , Pg.101 , Pg.102 , Pg.103 , Pg.104 , Pg.105 , Pg.106 , Pg.107 , Pg.108 , Pg.109 , Pg.110 , Pg.114 , Pg.115 , Pg.155 ]




SEARCH



1,3-Butadiene, Diels-Alder reaction with

Butadiene Diels-Alder

Butadienes, Diels-Alder reactions with aldehyde

Diels-Alder Reaction 1,3-butadiene with ethylene, concerted

Diels-Alder Reaction Fullerene with 1,3-butadiene

Diels-Alder reaction of butadiene with

Diels-Alder reaction of butadiene with maleic anhydride

Diels-Alder reactions butadiene with ethylene

Diels-Alder type cycloadditions with 2,3-dimethyl-1,3-butadienes

Ethylene Diels-Alder with butadiene

Maleic anhydride, Diels-Alder reaction with 1,3-butadiene

© 2024 chempedia.info