Butadiene polymer, applications

There are various requirements for impact-modified PVC. The most demanding is for outdoor sidings and window frames, where lifetimes of 20 years are expected. Because butadiene polymers or copolymers (e.g., acrylonitrile/butadiene/styrene (ABS), methyl methacrylate/butadiene/styrene (MBS)) are susceptible to UV degradation these polymers are usually not employed instead acrylate polymers are used for these applications. 

Cobalt complexes find various applications as additives for polymers. Thus cobalt phthalocyanine acts as a smoke retardant for styrene polymers,31 and the same effect in poly(vinyl chloride) is achieved with Co(acac)2, Co(acac)3, Co203 and CoC03.5 Co(acac)2 in presence of triphenyl phosphite or tri(4-methyl-6- f-butylphenyl) phosphite has been found to act as an antioxidant for polyenes.29 Both cobalt acetate and cobalt naphthenate stabilize polyesters against degradation,73 and the cobalt complex of the benzoic acid derivative (12) (see Section 66.4) acts as an antioxidant for butadiene polymers.46 Stabilization of poly(vinyl chloride)-polybutadiene rubber blends against UV light is provided by cobalt dicyclohexyldithiophosphinate (19).74 Here again, the precise structure does not appear to be known. 

Poly (styrene-co-acrylonitrile). See Styrene/acrylonitrile copolymer Poly (styrene-co-allyl alcohol). See Styrene/allyl alcohol copolymer Poly (styrene-co-butadiene). See Styrene/butadiene polymer Poly (styrene-co-divinylbenzene). See Styrene/DVB copolymer Poly (styrene-co-maleic anhydride). See Styrene/MA copolymer Poly (styrene-co-methyl methacrylate). See Styrene/methyl methacrylate copolymer Poly (styrene-co-a-methylstyrene). See Styrene/a-methyl styrene resin Poly (styrene-divinylbenzene). See Styrene/DVB copolymer Polystyrene, expandable Synonyms EPS Expandable polystyrene Expanded polystyrene XPS Definition Amorphous PS beads contg. pentane as a blowing agent and coated with a lubricant the polymer is converted to foamed articles with a closed cell structure by applic. of steam Properties Beads (0.4-1.5 mm diam.)... 

MAJOR POLYMER APPLICATIONS acrylics, epoxy resins, ethylene-vinyl acetate copolymer, polycarbonate, polyester, polyethylene, polypropylene, styrene butadiene rubber ... 

Polymers of chloroprene (structure [XII]) are called neoprene and copolymers of butadiene and styrene are called SBR, an acronym for styrene-butadiene rubber. Both are used for many of the same applications as natural rubber. Chloroprene displays the same assortment of possible isomers as isoprene the extra combinations afforded by copolymer composition and structure in SBR offsets the fact that structures [XIIll and [XIV] are identical for butadiene. 

The development of new polymer alloys has caused a lot of excitement in recent years but in fact the concept has been around for a long time. Indeed one of the major commercial successes of today, ABS, is in fact an alloy of acrylonitrile, butadiene and styrene. The principle of alloying plastics is similar to that of alloying metals - to achieve in one material the advantages possessed by several others. The recent increased interest and activity in the field of polymer alloys has occurred as a result of several new factors. One is the development of more sophisticated techniques for combining plastics which were previously considered to be incompatible. Another is the keen competition for a share of new market areas such as automobile bumpers, body panels etc. These applications call for combinations of properties not previously available in a single plastic and it has been found that it is less expensive to combine existing plastics than to develop a new monomer on which to base the new plastic. 

As the demand for rubber increased, so did the chemical industry s efforts to prepare a synthetic substitute. One of the first elastomers (a synthetic polymer that possesses elasticity) to find a commercial niche was neoprene, discovered by chemists at Du Pont in 1931. Neoprene is produced by free-radical polymerization of 2-chloro-1,3-butadiene and has the greatest variety of applications of any elastomer. Some uses include electrical insulation, conveyer belts, hoses, and weather balloons. 

Polymers can be modified by the introduction of ionic groups [I]. The ionic polymers, also called ionomers, offer great potential in a variety of applications. Ionic rubbers are mostly prepared by metal ion neutralization of acid functionalized rubbers, such as carboxylated styrene-butadiene rubber, carboxylated polybutadiene rubber, and carboxylated nitrile rubber 12-5]. Ionic rubbers under ambient conditions show moderate to high tensile and tear strength and high elongation. The ionic crosslinks are thermolabile and, thus, the materials can be processed just as thermoplastics are processed [6]. 

As noted in the Chapter 7 Focus On, rubber is a naturally occurring polymer of isoprene, or 2-methyl-l,3-butadiene. The double bonds of rubber have Z stereochemistry, but gutta-percha, the E isomer of rubber, also occurs naturally. Harder and more brittle than rubber, gutta-percha has a variety of minor applications, including occasional use as the covering on golf balls. 

Although PFE lacks a proven total concept for in-polymer analysis, as in the case of closed-vessel MAE (though limited to polyolefins), a framework for method development and optimisation is now available which is expected to be an excellent guide for a wide variety of applications, including non-polyolefinic matrices. Already, reported results refer to HDPE, LDPE, LLDPE, PP, PA6, PA6.6, PET, PBT, PMMA, PS, PVC, ABS, styrene-butadiene rubbers, while others may be added, such as the determination of oil in EPDM, the quantification of the water-insoluble fraction in nylon, as well as the determination of the isotacticity of polypropylene and of heptane insolubles. Thus PFE seems to cover a much broader polymer matrix range than MAE and appears to be quite suitable for R D samples. 

Applications Open-column chromatography was used for polymer/additive analysis mainly in the 1950-1970 period (cf. Vimalasiri et al. [160]). Examples are the application of CC to styrene-butadiene copoly-mer/(additives, low-MW compounds) [530] and rubbers accelerators, antioxidants) [531]. Column chromatography of nine plasticisers in PVC with various elution solvents has been reported [44], as well as the separation of CHCI3 solvent extracts of PE/(BHT, Santonox R) on an alumina column [532]. Similarly, Santonox R and Ionol CP were easily separated using benzene and Topanol CA and dilaurylthiodipropionate using cyclohexane ethyl acetate (9 1 v/v) [533]. CC on neutral alumina has been used for the separation of antioxidants, accelerators and plasticisers in rubber extracts [534]. Column chromatography of polymer additives has been reviewed [160,375,376]. 

---