Boron enolates generation

The chiral boron enolates generated from /V-acyl oxazolidones such as 7 and 8 (which were named Evans auxiliaries and have been extensively used in the a-alkylation reactions discussed in Chapter 2) have proved to be among the most popular boron enolates due to the ease of their preparation, removal, and recycling and to their excellent stereoselectivity.8... 

Boron enolates generated from a-heterosubstituted thioacetates by treatment with 105 undergo highly enantioselective and diastereoselective condensations. On the other hand, chiral esters 106 and 107, and amides 108 behave differently. V-Acyl derivatives of the bicyclic isoxazolidine 109 ° readily undergo syn-selective aldol reactions via enol borates. 

Aldol Reactions. - Seebach et al. have published a detailed study of the diasteroselective aldol reaction of boron enolates, generated from an ethyl ketone by treatment with boron trichloride or an alkoxydichloroborane in the presence of Hunig s base. The reaction was found to occur with ul topicity in selectivities from 90-99%... 

Stereoselective anti-aldol reactions. As part of a synthesis of (>olypropionate natural products, Evans et al. have studied the stereoselectivity of the reaction of isobutyraldehyde with the chiral -ketoimide la, which has been shown to undergo syn-selective aldol reactions. Surprisingly, the (E)-boron enolate, generated in ether from dicyclohexylchloroborane and ethyidimethylamine, reacts with isobutyraldehyde to give the anti, anti-a Ao 2 and the syn, anti- AAo 2 in the ratio 84 16. Similar diastereoselectivity obtains with the reaction of the isomeric jS-ketoimide lb. 

Conventional asymmetric aldol reactions have been performed by using chiral enolates and achiral carbonyl compounds. A chiral boron enolate generated from a chiral oxazolidone derivative (26 and 28), dialkylboron tri-fiate, and diisopropylethylamine reacts stereoselectively with aldehydes to afford the corresponding syn aldol adducts (27 and 29) in good yields with excellent diastereoselectivity (Eqs. (8) and (9)) [12]. The opposite sense of asymmetric induction is achieved by changing the chiral auxiliary. Several other chiral auxiliaries have also been developed for highly diastereoselec-tive synthesis of syn aldol adducts (Eqs. (10)-(13)) [13]. 

A more eflicient and general synthetic procedure is the Masamune reaction of aldehydes with boron enolates of chiral a-silyloxy ketones. A double asymmetric induction generates two new chiral centres with enantioselectivities > 99%. It is again explained by a chair-like six-centre transition state. The repulsive interactions of the bulky cyclohexyl group with the vinylic hydrogen and the boron ligands dictate the approach of the enolate to the aldehyde (S. Masamune, 1981 A). The fi-hydroxy-x-methyl ketones obtained are pure threo products (threo = threose- or threonine-like Fischer formula also termed syn" = planar zig-zag chain with substituents on one side), and the reaction has successfully been applied to macrolide syntheses (S. Masamune, 1981 B). Optically pure threo (= syn") 8-hydroxy-a-methyl carboxylic acids are obtained by desilylation and periodate oxidation (S. Masamune, 1981 A). Chiral 0-((S)-trans-2,5-dimethyl-l-borolanyl) ketene thioketals giving pure erythro (= anti ) diastereomers have also been developed by S. Masamune (1986). 

Stereoselectivities of 99% are also obtained by Mukaiyama type aldol reactions (cf. p. 58) of the titanium enolate of Masamune s chired a-silyloxy ketone with aldehydes. An excess of titanium reagent (s 2 mol) must be used to prevent interference by the lithium salt formed, when the titanium enolate is generated via the lithium enolate (C. Siegel, 1989). The mechanism and the stereochemistry are the same as with the boron enolate. 

Scheme 5 details the asymmetric synthesis of dimethylhydrazone 14. The synthesis of this fragment commences with an Evans asymmetric aldol condensation between the boron enolate derived from 21 and trans-2-pentenal (20). Syn aldol adduct 29 is obtained in diastereomerically pure form through a process which defines both the relative and absolute stereochemistry of the newly generated stereogenic centers at carbons 29 and 30 (92 % yield). After reductive removal of the chiral auxiliary, selective silylation of the primary alcohol furnishes 30 in 71 % overall yield. The method employed to achieve the reduction of the C-28 carbonyl is interesting and worthy of comment. The reaction between tri-n-butylbor-... 

Ideal starting materials for the preparation of. svn-aldols are ketones that can be readily deprotonated to give (Z)-enolates which are known to give predominantly yyu-adducts. Thus, when (5,)-1-(4-methylphenyl)sulfonyl-2-(l-oxopropyl)pyrrolidine is treated with dibutylboryl triflate in the presence of diisopropylethylamine, predominant generation of the corresponding (Z)-boron enolate occurs. The addition of this unpurified enolate to 2-methylpropanal displays not only simple diastereoselectivity, as indicated by a synjanti ratio of 91 9, but also high induced stereoselectivity, since the ratio of syn- a/.vyn-lb is >97 3. 

The following C2-symmetric bis-sulfonamide is a more efficient controller of stereoselectivity in aldol additions. The incorporation of this ligand into the bromodiazaborolane, subsequent generation of the boron enolate derived from 3-pentanone, and addition to achiral aldehydes preferentially leads to the formation of ijn-adducts (synjanti 94 6 to >98 2) with 95-98% ee. Chemical yields of 85-95% are achieved51. 

Further insight into the P-borylation reaction of a,P-enones (Scheme 2.32) showed that the reaction can be carried out in THF, and the catalyst generated in situ from CuCl (5 mol%), the imidazolium salt (5 mol%), and NaO Bu (10 mol%), to form the [Cu(O Bu) (NHC)] as the catalysis initiating species. In this case, stable boron enolate products are formed which need to be hydrolysed by methanol to the ketone products [114]. 

Enantioselectivity can also be induced by use of chiral boron enolates. Both the (+) and (-) enantiomers of diisopinocampheylboron triflate have been used to generate syn addition through a cyclic TS.132 The enantioselectivity was greater than 80% for most cases that were examined. Z-Boron enolates are formed under these conditions and the products are 2,3-syn. 

The C(9)—C(16) subunit was synthesized from the same starting material. The chain was extended by a boron enolate addition to 2-methylpropenal (Step D-2). After introduction of a double bond by selenoxide elimination in Step E-4, a Claisen rearrangement was used to generate an eight-membered lactone ring (Step E-6). 

The synthesis of the C(17)-C(24) segment also began with a diastereoselective boron enolate aldol addition. The adduct was protected and converted to an aldehyde in sequence H. The terminal diene unit was installed using a y-silylallyl chromium reagent, which generates a (3-hydroxysilane. Peterson elimination using KH then gave the Z-diene. 

Other methods are also available for generation of boron enolates. Dialkylboranes react with acyclic enones to give Z-enolates by a 1,4-reduction.19 The preferred Z-stereochemistry is attributed to a cyclic mechanism for hydride transfer ... 

Aldol reactions.1 Several exotic boron derivatives have been used to prepare boron enolates, of particular interest because of their use for selective syn-aldol reactions. Actually boron enolates can be generated using BC13 and Hiinig s base. Dichloroboron enolates are unusually reactive even at -95°, and show syn-selectivity of 80-95%. Aldol reactions are carried out in CH2C12 by mixing the ketone and BC13 (1 2 equiv.) followed by addition of the base (2 equiv.) and the aldehyde (1 equiv.). Yields are 80-95%. 

The lithium enolate generated using lithium diisopropylamide [4111-54-0], lithium 2,2,6,6-tetramethylpiperidide [58227-87-1], or lithium hexamethyldisilazide [4039-32-17 is a chemical reagent that reacts with other reactants to give a variety of products (37). In the quest for improved stereospecificity, enolates with different cations such as silicon, aluminum, boron, and zinc have also been used (38). In group transfer polymerization, ketene silyl acetals, eg, (CH3)2C=C [OSi(CH3)3] (OCH3) are employed as initiators (39). 

A similar three-component transformation can be achieved using triethylborane-induced radical reactions (Scheme 6.34) [53]. On exposure to air, triethylborane generates the ethyl radical, which abstracts iodine from alkyl iodides to generate the t-butyl radical. Addition of the resulting t-butyl radical to methyl vinyl ketone produces a radical a to the carbonyl group, which is trapped by triethylborane to form a boron enolate with the liberation of ethyl radical, thus creating a chain. 

Simultaneous treatment of a carbonyl compound with a Lewis acid and a tertiary amine or another weak base ( soft enolization ) can sometimes be used to generate enolates of sensitive substrates which would have decomposed under strongly basic reaction conditions [434]. Boron enolates, which readily react with aldehydes at low temperatures, can also be prepared in situ from sensitive, base-labile ketones or carboxylic acid derivatives [293, 295, 299]. Unwanted decomposition of a carbanion may also be prevented by generating it in the presence of an electrophile which will not react with the base (e.g. silyl halides or silyl cyanides [435]). 

By careful choice of base and dialkylboryl triflate it is possible to generate either the kinetic boron enolate or the thermodynamic boron enolate. These proceed to react with aldehydes without loss of regiochemical integrity, as shown in Equations B5.3 and B5.4. 

---