Bonding electrical conductivity

A different approach, which is more suitable for nonmolecular, extended bonded, electrically conducting inorganic materials, is to use different molecular layers, each of which has a different function. For example, the first layer can electrically passivate the surface and a second layer can give long-term chemical protection [7]. 

The fabric may also be given one or more of a number of other finishing treatments, either ia tandem with web formation and bonding or off-line as a separate operation, as a means of enhancing fabric performance or aesthetic properties. Performance properties iaclude functional characteristics such as moisture transport, absorbency, or repeUency flame retardancy electrical conductivity or static propensity abrasion resistance and frictional behavior. Aesthetic properties iaclude appearance, surface texture, and smell. 

The absence of an electron from a covalent bond leaves a hole and the neighboring valence electron can vacate its covalent bond to fill the hole, thereby creating a hole in a new location. The new hole can, in turn, be filled by a valence electron from another covalent bond, and so on. Hence, a mechanism is estabUshed for electrical conduction that involves the motion of valence electrons but not free electrons. Although a hole is a conceptual artifact, it can be described as a concrete physical entity to keep track of the motion of the valence electrons. Because holes and electrons move in opposite directions under the influence of an electric field, a hole has the same magnitude of charge as an electron but is opposite in sign. 

Va.na.dium (II) Oxide. Vanadium(II) oxide is a non stoichiometric material with a gray-black color, metallic luster, and metallic-type electrical conductivity. Metal—metal bonding increases as the oxygen content decreases, until an essentially metal phase containing dissolved oxygen is obtained (14). 

Bismuthides. Many intermetaUic compounds of bismuth with alkafl metals and alkaline earth metals have the expected formulas M Bi and M Bi, respectively. These compounds ate not saltlike but have high coordination numbers, interatomic distances similar to those found in metals, and metallic electrical conductivities. They dissolve to some extent in molten salts (eg, NaCl—Nal) to form solutions that have been interpreted from cryoscopic data as containing some Bi . Both the alkafl and alkaline earth metals form another series of alloylike bismuth compounds that become superconducting at low temperatures (Table 1). The MBi compounds are particularly noteworthy as having extremely short bond distances between the alkafl metal atoms. 

Static electricity Inert milling system generation both, Control/interlock with oxygen concentration in mill and con- monitoring veying equipment bond all electrically conductive components Use conductive materials of construction CCPS G-12 CCPS G-23 CCPS G-29 CCPS G-32 ISAS84.01 NFPA 654... 

The easy movement of the electrons gives the high electrical conductivity of metals. The metallic bond has no directionality, so that metal ions tend to pack to give simple, high-density structures, like ball-bearings shaken down in a box. 

That is, the H-bonded network provides a natural route for rapid transport. This phenomenon of proton jumping thus occurs with little actual movement of the water molecules themselves. Ice has an electrical conductivity close to that of water because such proton jumps also readily occur even when the water molecules are fixed in a crystal lattice. Such conduction of protons via H-bonded networks has been offered as an explanation for a number of rapid proton transfers of biological significance. 

The structure of AICI3 is similarly revealing. The crystalline solid has a layer lattice with 6-coordinate Al but at the mp 192.4° the stmcture changes to a 4-coordinate molecular dimer Al2Clg as a result there is a dramatic increase in volume (by 85%) and an even more dramatic drop in electrical conductivity almost to zero. The mp therefore represents a substantial change in the nature of the bonding. The covalently bonded... 

Some of the alkali metal-group 15 element systems give compounds of stoichiometry ME. Of these, LiBi and NaBi have typical alloy stmc-tures and are superconductors below 2.47 K and 2.22 K respectively. Others, like LiAs, NaSb and KSb, have parallel infinite spirals of As or Sb atoms, and it is tempting to formulate them as M+ (E )" in which the (E )" spirals are iso-electronic with those of covalently catenated Se and Te (p. 752) however, their metallic lustre and electrical conductivity indicate at least some metallic bonding. Within the spiral chains As-As is 246 pm (cf. 252 pm in the element) and Sb-Sb is 285 pm (cf. 291 pm in the element). 

Locating and Bonding when cathodic protection is applied to an existing jointed pipeline, all joints must be located without digging up the pipe. On location, each joint is exposed and an electrically conducting bond (usually galvanised steel strip or copper cable) is welded into position. 

Even though silicon is metallic in appearance, it is not generally classified as a metal. The electrical conductivity of silicon is so much less than that of ordinary metals it is called a semiconductor. Silicon is an example of a network solid (see Figure 20-1)—it has the same atomic arrangement that occurs in diamond. Each silicon atom is surrounded by, and covalently bonded to, four other silicon atoms. Thus, the silicon crystal can be regarded as one giant molecule. 

---