Black definition

CAS 7782-42-5 EINECS/ELINCS 231-955-3 Synonyms Black lead Cl 77265 Graphite, natural Mineral carbon Pigment black 10 Plumbago Silver graphite Stove black Definition The crystalline allotropic form of carbon occurs naturally (esp. in Canada, Ceylon), or produced synthetically from petroleum coke by heating to = 3000 C in an elec, resist, furnace Empiricai C... 

Primary aromatic amides are crystaUine sohds with definite melting points. Upon boiling with 10-20 per cent, sodium or potassium hydroxide solution, they are hydrolysed with the evolution of ammonia (vapour turns red htmus paper blue and mercurous nitrate paper black) and the formation of the alkah metal salt of the acid ... 

Description of the Method. The operational definition of water hardness is the total concentration of cations in a sample capable of forming insoluble complexes with soap. Although most divalent and trivalent metal ions contribute to hardness, the most important are Ca + and Mg +. Hardness is determined by titrating with EDTA at a buffered pH of 10. Eriochrome Black T or calmagite is used as a visual indicator. Hardness is reported in parts per million CaCOs. 

A polymer blend is a physical or mechanical blend (alloy) of two or more homopolymers or copolymers. Although a polymer blend is not a copolymer according to the above definition, it is mentioned here because of its commercial importance and the frequency with which blends are compared with chemically bonded copolymers. Another technologically significant material relative to the copolymer is the composite, a physical or mechanical combination of a polymer with some unlike material, eg, reinforcing materials such as carbon black, graphite fiber, and glass (see Composite materials). 

The method of oxidation is essentially that of Russigd The product obtained is slightly but definitely better than that produced at a lower temperature, or by adding the sulfuric acid to the dichromate solution, or by using ferric clrloride as in A). These latter procedures give the same yield, but the product is less pure and contains a black, ether-soluble impurity which must be washed out carefully after crystallization from ether. 

For iridium the position is reversed. This time it is the black dioxide, Ir02, with the rutile structure (p. 961), which is the only definitely established oxide. It is obtained by heating the metal in oxygen or by dehydrating the precipitate produced when alkali is added to an aqueous solution of [IrCl6] . Contamination either by unreacted metal or by alkali is, however, difficult to avoid. The other oxide, Ir203, is said to be... 

The first definite production of plutonium metal was made in November, 1943 by Baumbach and coworkers (1958). Approximately 35 micrograms of PuFi in a small thoria crucible in a high vacuum was reacted with barium metal at 1400 C to yield plutonium metal. The metal was found to have a silvery lustre, a density of about 16 grams j>er cubic centimeter and it rapidly absorbed hydrogen at about 210 C to form a black powder subsequently identified as PUH3 (a proof that metal had been produced). 

For a grey body, the emissivity and the absorptivity are, by definition, independent of temperature and hence equation 9.115 may be applied more generally showing that, where one radiation property (a, r or e) is specified for an opaque body, the other two may be obtained from equations 9.115 and 9.124. KirchofPs Law explains why a cavity with a small aperture approximates to a black body in that radiation entering is subjected to repeated internal absorption and reflection so that only a negligible amount of the incident radiation escapes through the aperture. In this way, a - e = 1 and, at T K, the emissive power of the aperture is aT4. 

FIGURE 13.6 The definition of the initial rate of reaction. The orange curves show how the concentration of N20, changes with time for five different initial concentrations. The initial rate of consumption of N20-, can be determined by drawing a tangent (black line) to each curve at the start of the reaction. 

Many of the d-block elements form characteristically colored solutions in water. For example, although solid copper(II) chloride is brown and copper(II) bromide is black, their aqueous solutions are both light blue. The blue color is due to the hydrated copper(II) ions, [Cu(H20)fJ2+, that form when the solids dissolve. As the formula suggests, these hydrated ions have a specific composition they also have definite shapes and properties. They can be regarded as the outcome of a reaction in which the water molecules act as Lewis bases (electron pair donors, Section 10.2) and the Cu2+ ion acts as a Lewis acid (an electron pair acceptor). This type of Lewis acid-base reaction is characteristic of many cations of d-block elements. 

As surface area and pore structure are properties of key importance for any catalyst or support material, we will first describe how these properties can be measured. First, it is useful to draw a clear borderline between roughness and porosity. If most features on a surface are deeper than they are wide, then we call the surface porous (Fig. 5.16). Although it is convenient to think about pores in terms of hollow cylinders, one should realize that pores may have all kinds of shapes. The pore system of zeolites consists of microporous channels and cages, whereas the pores of a silica gel support are formed by the interstices between spheres. Alumina and carbon black, on the other hand, have platelet structures, resulting in slit-shaped pores. All support materials may contain micro, meso and macropores (see text box for definitions). 

Black, JW, Duncan, WAM, Durant, CJ, Ganellin, CR and Parsons, ME (1972) Definition and antagonism of histamine H2 receptors. Nature 236 358-390. 

Hirabayashi (1907) defined Kuroko as an ore which is a fine compact mixture of sphalerite, galena, and barite. This definition can be applied to black ore , but not to yellow ore or siliceous ore because these minerals are not abundant in these ores. Kinoshita (1944) defined Kuroko deposit as a deposit genetically related to the Tertiary volcanic rocks, consisting of a combination of Kuroko (black ore), Oko (yellow ore), Keiko (siliceous ore), and/or Sekkoko (gypsum ore) (Matsukuma and Horikoshi, 1970). The deposit is generally defined as a strata-bound polymetallic sulfide-sulfate deposit genetically related to Miocene bimodal (felsic-basaltic) volcanism (T. Sato, 1974). 

DEFINE GRAPHICS OPTIONS SET DEVICE DESTINATION TO MS OFFICE CGM FILE, REPLACE ANY EXISTING CGM FILE, RESET ANY SYMBOL DEFINITIONS, AND SET COLORS TO BLACK. filename filerefl "C lab scatter.cgm" ... 

MODE = INCLUDE OPTION ENSURES THAT VALUES THAT MIGHT FALL OUTSIDE OF THE EXPLICITLY STATED AXIS ORDER WOULD BE INCLUDED IN THE BOX AND WHISKER DEFINITION. symboll width = 28 bwidth = 3 color = black line = 1 value = none interpol = BOXJTOO mode = include symbol2 width = 28 bwidth = 3 color = gray line = 2 value = none interpol = BOXJTOO mode = include ... 

Pulping liquors. Pulping liquor, also called black liquor, is a corrosive material used to dissolve wood chips for the manufacturing of paper and other materials. To promote waste minimization and recycling, U.S. EPA excluded pulping liquors from the definition of solid waste if they are reclaimed in a recovery furnace and then reused in the pulping process. If the liquors are recycled in another way, or are accumulated speculatively, they are not excluded. 

If you mix sulfur and iron filings in a certain proportion and then heat the mixture, you can see a red glow spread through the mixture. After it cools, the black solid lump which has been produced, even if crushed into a powder, does not dissolve in carbon disulfide and is not attracted by a magnet. The material has a new set of properties it is a compound, called iron(II) sulfide. It has a definite composition, and if, for example, you had mixed more iron with the sulfur originally, some iron(II) sulfide and some leftover iron would have resulted. The extra iron would not have become part of the compound. 

---