Biosensors construction

One way to reduce the number of independent variables in the FRET-adjusted spectral equation is to use samples with a fixed donor-to-acceptor ratio. Under these conditions, the values of d and a are no longer independent, but rather the concentration of d is now a function of a and vice-versa. This approach is typical for the situation of FRET-based biosensor constructs. These sensors normally are designed to have a donor fluorophore attached to an acceptor by a domain whose structure is altered either as a result of a biological activity (such as proteolysis or phosphorylation), or by its interaction with a specific ligand with which it has high affinity. In general, FRET based biosensors have a stoichiometry of one... 

Fig. 17 Biosensor construction FigJ.8 Reaction scheme of an oxidase...

Biosensors constructed for ethanol and D-glucose measurements in beverages were built using ferrocene compounds as electron transfer mediators between the coenzyme PQQ of immobilized enzymes glucose (GDH) and alcohol (ADH) dehydrogenases and a carbon electrode surface <2003JOM(668)83>. 

Regarding the enzyme polymer ratio, high polymer amounts may provide higher immobilisation yields but may restrict the enzyme flexibility and functionality, and high enzyme amounts may provide higher responses but may limit the sensitivity of the biosensor. The dilemma has appeared and the choice will depend on the own particular interests. The 1 2 ratio provided higher absorbance values (0.259 coefficient of variation (CV) — 17%) than those obtained with the 2 1 (0.041 CY — 9%) and the 1 3 (0.189 CV = 15%) ratios. In the same way, the 1 2 ratio also provided the highest immobilisation yields after 30-min incubation in buffer (62% as compared to 16% and 41% for the 2 1 and the 1 3 ratios, respectively). In our case, the results clearly demonstrate that the 1 2 enzyme polymer ratio is the optimum one for the biosensor construction. 

Although at present these biosensors cannot be considered as an accurate quantification technique, the applicability as tools for a first and extremely useful screening of the toxicity of real environmental samples is demonstrated. The simplicity of both the biosensor construction and the electrochemical measurement, together with the electrode disposability and the sufficient sensitivity, make the amperometric biosensors attractive for routine analysis, even at home. 

Figure 21.1 shows the protocol for the biosensor construction and the subsequent electrochemical measurement. Figure 21.2 shows the calibration curve obtained from the amperometric PP2A inhibition-based biosensor. 

Electropolymerized films have been used to prevent interferences and fouling in biosensors constructed from reticulated vitreous carbon and platinum disk electrodes (14,15). A biosensor constructed using electropolymerized films can have significantly improved diffusional properties due to the thinness of the film. By engineering the components and properties of a biosensor on a microscopic scale, rather than using "bulk-technology" and physically assembling discrete macroscopic components, as is the conventional practice, an all-chemical method of construction can be achieved. All-chemical methods of construction would... 

Biosensors constructed from wired enzyme assemblies... 

The PEG materials were used to produce high-sensitivity, versatile and robust biosensors. Some examples investigated include PEG-biosensors constructed from directional couplers [194], Mach-Zehnder interferometers [195] and various optical configurations that use SPR technique [196,197]. Among these, the SPR is the most used. In this case, the metal that generates... 

Figure 17. Schematic representation of the affinity biosensor construction and the proposed operational principle and voltammetric traces for affinity sensor signalling a biotin-functionalized surface before (A) and after (B) target protein (antibiotin IgG-HRP) association and precipitation reaction steps. Voltammetric measurements were performed in 0.1 M phosphate buffer (pH 7.0),containing 0.1 mM ferrocene methanol as a signal tracer. Inset charge coupled device (CCD) camera images of a sensor surface upon signalling reactions (Adapted from Refs. [176] [177]).

The objectives of this our study were to investigate the properties of immobilized horseradish peroxidase on magnetic particle coated with copolymer of acrylamide and acrylonitrile, used furder in fibre optic smart biosensor constructions with simultaneously immobilized different antibodies for aflatoxines (Fig. 4). 

Fig. 26. Schematic representation of immobilization methods used for biosensor construction. O enzyme molecule, crosslinker molecule, 1 adsorption, 2 gel entrapment, 3 covalent binding to external surface, 4 crosslinking.

The main advantage of the proposed wine analysis is its selectivity because only primary amines can be detected using this method. Also, byproducts do not interfere with phenols or thiols. The quality of the wine and its organoleptic characteristics are well defined considering the effects of the malolactic fermentation process. The electrometric methods assure reliable results for the 1-malic and 1-lactic acids assay. The biosensors construction for 1-malic and 1-lactic acids assay in wine are based on malate dehydrogenase and lactate oxidase enzymes.117 The reproducibility of the results as well as the selectivity make it reliable for establishing the quality of the wine. 

Further, amperometric biosensors constructed using 1-amino acid oxidase can enantioselectively assay 1-amino acids.125 For enantioselective analysis, amperometric biosensors assure the best reliability of the analytical information. 

The implementation of natural ion channel systems for biosensor construction will suffer from the complexity of the structural and regeneration requirements imposed by the biological matrix. In a practical context, a more promising immediate solution seems to be the development of biosensors having an ion channel activity without implementation of ion channel proteins from natural sources, i.e. artificial ion channels. This involves modulation of ion conductivity through lipid membranes by means of alteration of phase structure by a wide variety of different selective binding interactions with, e.g. enzymes, antibodies, lectins, and others. 

Polyak B, Geresh S, Marks RS (2004) Synthesis and characterization of a biotin-alginate conjugate and its application in a biosensor construction. Biomacromol 5(2) 389-396 Rees DC, Robertson AD (2001) Some thermodynamic implications for the thermostability of proteins. Protein Sci 10(6) 1187-1194... 

---