B. F. Goodrich

Ketene Process. The ketene process based on acetic acid or acetone as the raw material was developed by B. F. Goodrich (81) and Celanese (82). It is no longer used commercially because the intermediate P-propiolactone is suspected to be a carcinogen (83). In addition, it cannot compete with the improved propylene oxidation process (see Ketenes, ketene dimers, and related substances). 

Synthetic emulsion polymers account for approximately 70% of the U.S. consumption of acrylate monomers. Major end uses for these latex polymers are coatings (32%), textiles (17%), adhesives (7%), paper (5%), and floor poHshes (3%). The U.S. producers of acryflc copolymer emulsions include Rohm and Haas, Reichhold, National Starch, Union Carbide, Air Products, Unocal, B. F. Goodrich, and H. B. Fuller. 

B. F. Goodrich Co., Typical Properties of Geon Uinyl Compounds for Wire and Cables Insulation and Jacketing, bulletin, Cleveland, Ohio, 1991. 

Hulcani ng Nitrile Rubber, Technical Bulletin HM-9, B. F. Goodrich Chemicals Co., Independence, Ohio. 

Many random copolymers have found commercial use as elastomers and plastics. For example, SBR (62), poly(butadiene- (9-styrene) [9003-55-8] has become the largest volume synthetic mbber. It can be prepared ia emulsion by use of free-radical initiators, such as K2S20g or Fe /ROOH (eq. 18), or in solution by use of alkyl lithium initiators. Emulsion SBR copolymers are produced under trade names by such companies as American Synthetic Rubber (ASPC), Armtek, B. F. Goodrich (Ameripool), and Goodyear (PHoflex) solution SBR is manufactured by Firestone (Stereon). The total U.S. production of SBR in 1990 was 581,000 t (63). 

Poly(butadiene- (9-acrylonitrile) [9008-18-3] NBR (64), is another commercially significant random copolymer. This mbber is manufactured by free-radical emulsion polymerization. Important producers include Copolymer Rubber and Chemical (Nysyn), B. F. Goodrich (Hycar), Goodyear (Chemigum), and Uninoyal (Paracdl). The total U.S. production of nitrile mbber (NBR) in 1990 was 95.6 t (65). The most important property of NBR mbber is its oil resistance. It is used in oil well parts, fuels, oil, and solvents (64) (see Elastomers, synthetic— nitrile rubber). 

Random copolymers of vinyl chloride and other monomers are important commercially. Most of these materials are produced by suspension or emulsion polymerization using free-radical initiators. Important producers for vinyl chloride—vinyUdene chloride copolymers include Borden, Inc. and Dow. These copolymers are used in specialized coatings appHcations because of their enhanced solubiUty and as extender resins in plastisols where rapid fusion is required (72). Another important class of materials are the vinyl chloride—vinyl acetate copolymers. Principal producers include Borden Chemicals Plastics, B. F. Goodrich Chemical, and Union Carbide. The copolymerization of vinyl chloride with vinyl acetate yields a material with improved processabihty compared with vinyl chloride homopolymer. However, the physical and chemical properties of the copolymers are different from those of the homopolymer PVC. Generally, as the vinyl acetate content increases, the resin solubiUty in ketone and ester solvents and its susceptibiUty to chemical attack increase, the resin viscosity and heat distortion temperature decrease, and the tensile strength and flexibiUty increase slightly. 

Poly(dicyclopentadiene). The development of polydicyclopentadiene [25038-78-2] for reaction injection molding is an area which has generated much interest. The polyDCPD is obtained via metathesis polymerization of high purity (usually greater than 98%) DCPD. Excellent reviews (61—62) of the chemistry and properties of polyDCPD have been pubHshed. The patent Hterature of polyDCPD synthesis, catalysts, modifiers, and appHcations is dominated by Hercules (44 patents) and B. F. Goodrich (43 patents) in the U.S. Other participants are Orkem, SheU, Nippon Zeon, and Teijin. 

Formerly produced by American Cyanamid ia Bound Brook, N.J. (U.S.). Formerly trademark Hycar, produced by B.F. Goodrich. 

B. F. Goodrich, Bf/car 4090 ACM Non-Post-Cnre Technical Data Bulletin PA-87-1, 1987. 

The first pubHshed information on the halogenation of butyl mbber was provided by B. F. Goodrich Co. (2). Brominating agents such as /V-bromosuccinimide were used the bromination occurred ia a bulk reaction. This technology was commercialized ia 1954, but withdrawn ia 1969 (3). Exxon Chemical researchers pursued the chlorination of butyl mbber ia hexane solution usiag elemental chlorine, and a continuous process was commercialized ia 1961 (4). Currentiy, both chlorination and bromination are carried out ia continuous-solution processes. 

---