Attenuated total reflection spectrometry

Tor attenuated total-reflectance spectrometry. Unless otherwise indicated. 

Umezawa, K. Lin, X.M. Nishizawa. S. Sugawara, M. Umezawa, Y. Cation permselectivity in the phase boundary of ionophore-incorporated solvent polymeric membranes as studied by fourier transform infrared attenuated total reflection spectrometry. Anal. Chim. Acta 1993. 282. 247-257. 

The proportion of trans isomer in a reaction mixture can be determined by gas chromatography, infrared spectroscopy, NMR, infrared attenuated total reflectance spectrometry, or by preparative silver ion chromatography (Section 4.6). 

DETERMINATION OF NUTRITIONAL PARAMETERS OF YOGHURT SAMPLES THROUGH PARTIAL-LEAST-SQUARES ATTENUATED TOTAL REFLECTANCE FOURIER TRANSFORM INFRARED SPECTROMETRY... 

The aim of this work is the determination of several nutritional parameters, such as Energetic Value, Protein, Fat, and Carbohydrates content, in commercially available yoghurt samples by using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FT-IR) spectrometry and a partial least square approach. 

Surface analysis has made enormous contributions to the field of adhesion science. It enabled investigators to probe fundamental aspects of adhesion such as the composition of anodic oxides on metals, the surface composition of polymers that have been pretreated by etching, the nature of reactions occurring at the interface between a primer and a substrate or between a primer and an adhesive, and the orientation of molecules adsorbed onto substrates. Surface analysis has also enabled adhesion scientists to determine the mechanisms responsible for failure of adhesive bonds, especially after exposure to aggressive environments. The objective of this chapter is to review the principals of surface analysis techniques including attenuated total reflection (ATR) and reflection-absorption (RAIR) infrared spectroscopy. X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), and secondary ion mass spectrometry (SIMS) and to present examples of the application of each technique to important problems in adhesion science. 

Heinen M, Jusys Z, Behm RJ. 2009. Reaction pathways analysis and reaction intermediate detection via simultaneous differential electrochemical mass spectrometry (DBMS) and attenuated total reflection Bourier transform infrared spectroscopy (ATR-BTIRS). In Vielstich W, Gasteiger HA, Yokokawa H, eds. Handbook of Buel Cells. Volume 5 Advances in Electrocatalysis. Chichester John Wiley Sons, Ltd., in press. 

The ability to recover monolayers and subject them to meaningful analysis has become practical only in recent years because of the development of new methods of trace analysis. High-performance liquid chromatography and vapor phase chromatography allow separation and identification of such small quantities (54a). Attenuated total reflectance techniques for infrared analysis (56) and field desorption mass spectrometry (68) have been applied to the trans-... 

Identifying pharmaceuticals, whether APIs or excipients used to manufacture products, and the end products themselves is among the routine tests needed to control pharmaceutical manufacturing processes. Pharmacopoeias have compiled a wide range of analytical methods for the identification of pharmaceutical APIs and usually several tests for a product are recommended. The process can be labor-intensive and time-consuming with these conventional methods. This has raised the need for alternative, faster methods also ensuring reliable identification. Of the four spectroscopic techniques reviewed in this book, IR and Raman spectroscopy are suitable for the unequivocal identification of pharmaceuticals as their spectra are compound-specific no two compounds other than pairs of enantiomers or oligomers possess the same IR spectrum. However, IR spectrometry is confronted with some practical constraints such as the need to pretreat the sample. The introduction of substantial instrumental improvements and the spread of attenuated total reflectance (ATR) and IR microscopy techniques have considerably expanded the scope of IR spectroscopy in the pharmaceutical field. Raman spectroscopy,... 

To shed light on the mechanism of formation of silsesquioxane a7b3, to identify the species formed during the process, and to try to explain the high selectivity towards structure a7b3 of the optimised synthetic method described above (64% yield in 18 h), the synthesis of cyclopentyl silsesquioxane a7b3 was monitored by electrospray ionisation mass spectrometry (ESI MS) [50-52] and in situ attenuated total reflection Fourier-transform infrared (ATR FTIR) spectroscopy [53, 54]. Spectroscopic data from the latter were analysed using chemometric methods to identify the pure component spectra and relative concentration profiles. 

The two additives have heen identified hy matrix assisted laser desorption ionisation mass spectrometry (MALDI-MS) and attenuated total reflection infrared spectroscopy (ATR). 

One disadvantage of films is that they may cause excessive light-scattering intransmittance spectrometry. This shortcoming can be overcome by using attenuated total-reflection or internal-reflection sampling techniques. 

Evaluation of the meaningfulness of results from less sensitive and less selective methods needs additional attention (e.g. attenuated total reflectance infrared (ATR-IR) or solid-state NMR spectrometry) [2]. Indirect insights from functional studies include support for transmembrane orientation (Fig. 11.13b) from parabolic dependence of the activity of synthetic ion channel or pore on bilayer thickness (Section 11.3.7) [56] and other readouts in support of operational hydrophobic matching. Flippase activity may provide some support for interfacial location (Section 11.3.7, Fig. 11.13d) [61, 62]. 

Parallel to the synthesis of library compounds on solid supports, the direct analysis (i.e. on-bead ) is an attractive concept. Leaving aside the methods of on-bead-infrared-spec-troscopy [41] using attenuated total reflection (ATR) and gel-phase NMR-techniques [42, 43], we wish to consider the use of on-bead analysis in mass spectrometry. The requirements of the ionization process restrict on-bead analysis to the MALD1 technique. However, also for MALDI-analysis, in so-called direct monitoring studies [44-46], the compounds are cleaved from the bead before the actual ionization. True on-bead analysis under MALDI conditions is only possible with photolytically cleavable linkers, and this technique has been dealt with in several publications [28,29] in which the compounds are both cleaved and ionized simultaneously within the MALDI source with a single laser shot. The wavelength of the MALDI-laser must however correspond with the wavelength required to cleave the compounds from the resin. Therefore, on-bead analysis represents a method for special analytical problems which is limited to MALDI. 

Jarute G, Kainz A, SchroU G, Baena JR, Lendl B (2004) On-line determination of the intracellular poly(P-hydroxybutyric acid) content in transformed Escherichia coli and glucose during PHB production using stopped-flow attenuated total reflection FT-IR spectrometry. Anal Chem 76 6353-6358... 

Spectroscopic methods are mainly useful to identify the elements, functional groups, and chemical structures close to the biomaterial surface. Techniques like X-ray photoelectron spectroscopy, attenuated total reflection fourier transform infrared spectroscopy, and secondary ion mass spectrometry have been used widely in determining the elemental composition and charged species at biomaterial surface. Other important characteristics obtained from the biomaterial surface are surface energy and relative wettability using thermodynamic method such as contact angle experiments. 

An example of blending was when phenylcarbomylated or azido phenylcarbo-mylated p-CD was successfully blended with polymethyl methacrylate (PMMA) and electrospun into nanofibrous membranes for organic waste treatment and water purification (Kaur et al. 2006). The presence of the p-CD derivatives on the surface of the nanofibers was confirmed by attenuated total reflectance-Fourier transform infrared spectrometry (ATR-FTIR) and x-ray photoelectron spectroscopy (XPS). A solution containing phenolphthalein (PHP) was used to determine the ability of the functionalized membranes to capture small organic molecules. The results showed... 

---