Assembly Area

Eamiliarity with the aetions to take, eseape routes, assembly areas. 

Familiarity with the actions to take, escape routes, assembly areas. 

Nonessential personnel report to safe assembly areas. Stop all hot work and confined space entry Nonessential Personnel... 

Assembly Area M= Live Fire = Force-on-Force... 

Direct to ambulatory assembly area in the Warm Zone for further review... 

Site evacuation routes and other alternative routes should be made available for reaching any site of emergency from inside and outside. Personnel accounting, procedure, assembly areas, safety zones, and exits should be known to everyone. 

Aqueous Cleanable. All parts should preferably be cleanable in water or a safe solvent, unless they come out of the production process clean enough to be double-bagged and shipped directly to the clean-room assembly area. When soldering is involved, for example, the specification should call out for the use of water-soluble or noclean fluxes. Parts and assembly design should allow suppliers to quickly switch to a non-CFC solvent. 

Manakins are famous for their elaborate courtship rituals, which are among the most complex of any of the birds. The most celebrated courtships involves species in which the males display at leks, or communal assembly areas where males gather to display to each other and to females as they arrive seeking a potential mate. 

Step 3. Vehicles move into assembly area. Exchange chemical suit. 1... 

STEP 3 ASSEMBLY AREA MOPP GEAR EXCHANGE... 

ALLOW SO METERS FROM THE LAST WASHDOWN POINT TO THE ASSEMBLY AREA... 

Two approaches were investigated to provide selective encapsulation for surface-micromachined pressure sensor devices [9]. The first method uses a glass-frit-bonded bulk micromachined silicon cap wafer, and the second method uses a patterned polymeric gel-like material in the assembly area to create this dam. 

Emergency Evacuation Training Preparing for the Future First responder, pre-planning, notification systems, exit routes, assembly areas, all-clear signals, and lines of authority. 

The production system in a company can be divided into different subsystems. The assembly area is linked to the other subsystems by the material and information flow (see Figure 1). 

Some emergencies, like a fire, explosion, or even toxic cloud, may cut off people from their assembly areas. Therefore, routes of evacuation and alternate routes should be clearly understood by all site personnel and visitors. All persons entering the site should be given a thorough explanation of the routes and alternate means of exit. The alternate and primary route should lead in different directions from each other. 

The assembly area, where parts or components are joined together in a subassembly or final product... 

The Licensee is responsible for safety on a NPS and this is delegated to the Station Manager. In the event of a reactor accident, which may involve the release of activity to the environment, the Shift Manager, after reporting the details of the accident to the Station Manager or his nominated deputy, if they are on the station, will declare over the public address system that an emergency situation exists. All station staff and other persons on the site withdraw to nominated assembly areas for a roll call. Instructions may be given to issue potassium iodate tablets. 

The Station Administrative Officer will have coordinated the results of the station personnel roll call from the nominated assembly areas and any missing personnel should have been identified and their normal place of duty ascertained. Evacuation of non-essential personnel is then arranged via safe routes to rest centres. 

---